JetsBath 2023
JetsBath Rain Shower System
Instruction Manual - Model 2023
Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your JetsBath Rain Shower System, Model 2023. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product. Retain this manual for future reference.
Safety Information
- Always turn off the main water supply before beginning any installation or maintenance.
- Ensure all connections are secure and watertight to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the brushed nickel finish, as this may damage the surface.
- The pressure balance valve is designed to prevent scalding; however, always test water temperature before use.
Package Contents
Verify that all components listed below are present and undamaged before proceeding with installation.
Image: All components of the JetsBath Rain Shower System, including the shower head, body jets, rough-in valve, face plate, shower arm, shower hose, hand shower head, handheld shower bracket, flanges, diverter knob, shower handle, and mounting hardware.
- 12-inch Rain Shower Head (SUS 304 stainless steel)
- 6 Pressurized Body Spray Jets (Copper)
- Handheld Shower Head (Copper)
- 16-inch Shower Arm (SUS 304 stainless steel)
- 59-inch Shower Hose (SUS 304 stainless steel)
- Hand Shower Holder (Copper)
- Diverter Shower Valve (Copper)
- Shower Valve Trim Kit
- Mounting Hardware
Setup and Installation
Professional installation is recommended for this shower system. Ensure that the rough-in valve is installed correctly within the wall, allowing for proper depth for tiling and trim plate installation. The pressure balance valve requires hot and cold water lines to be connected as indicated.
Image: Diagram illustrating the installation of the pressure balance valve, showing hot and cold water connections, built-in anti-scald feature, solid brass valve body, NPT 1/2" standard thread, and cUPC certified cartridge.
The handheld shower fitting inside the wall may require specific depth consideration to ensure the thread reaches the fitting when tiles are set, as its thread may be shorter than those of the body jets.
Follow local plumbing codes and regulations during installation. After installation, thoroughly check all connections for leaks before sealing the wall.
Operating Instructions
Your JetsBath shower system offers multiple water outlets for a customized shower experience.
Image: The JetsBath Rain Shower System with the overhead shower, handheld sprayer, and body jets all active, demonstrating the multi-functionality.
- Temperature Control: Use the main handle on the diverter valve to adjust the water temperature. Rotate towards 'H' for hot and 'C' for cold.
- Diverter Knob: The square diverter knob allows you to switch between the shower head, handheld sprayer, and body jets. Rotate the knob to select your desired water outlet.
- Rainfall Shower Head: The 12-inch ultra-thin shower head provides a wide coverage rainfall experience. Its angle is adjustable for optimal positioning.
- Handheld Sprayer: The solid brass handheld shower offers high-pressure rinsing and convenience for targeted cleaning or rinsing. It features an adjustable angle and a 59-inch shower hose.
- Body Jets: The six pressurized body spray jets provide a massage shower experience with 4x spray holes on each jet, delivering 64 water streams per jet.
Image: Close-up of the 12-inch rainfall shower head, highlighting its adjustable angle and self-cleaning silicone nozzles.
Image: The handheld shower sprayer in use, demonstrating its high-pressure spray and ergonomic curved design.
Image: The six body jets spraying water, illustrating their pressurized effect and adjustable angle.
Maintenance
- Cleaning Nozzles: The shower head and handheld sprayer feature touch-to-clean silicone nozzles. Simply rub the nozzles with your finger or a soft cloth to remove mineral buildup and maintain optimal spray performance.
- Surface Cleaning: Clean the brushed nickel finish with a soft, damp cloth. For stubborn spots, use a mild soap solution and rinse thoroughly. Dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, ammonia-based products, bleach, or cleaners containing alcohol, as these can damage the finish and components.
- Regular Inspection: Periodically check all connections for any signs of leaks or wear.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low water pressure | Clogged nozzles, partially closed shut-off valve, mineral buildup in pipes. | Clean shower head and body jet nozzles. Ensure shut-off valves are fully open. Consult a plumber if issue persists. |
| Leaks from connections | Loose connections, damaged O-rings or seals. | Tighten connections. Inspect and replace any damaged O-rings or seals. Ensure plumber's tape was used during installation. |
| Water temperature inconsistent | Issue with water heater, pressure balance valve malfunction. | Check water heater settings. If the problem persists, the pressure balance cartridge may need inspection or replacement by a professional. |
| Diverter not switching properly | Mineral buildup, internal valve issue. | Attempt to flush the system by running water through all outlets. If the issue continues, the diverter cartridge may need servicing. |
Specifications
| Feature | Detail |
|---|---|
| Brand | JetsBath |
| Model Number | 2023 |
| Color | Brushed Nickel |
| Material | Metal (SUS 304 Stainless Steel, Copper) |
| Finish Type | Brushed |
| Number of Handles | 2 |
| Mounting Type | Wall Mount |
| Flow Rate (Handheld) | 2.0 GPM |
| Flow Rate (Overhead Shower) | 2.5 GPM |
| Flow Rate (Each Body Jet) | Maximum 2.0 GPM |
| Item Weight | 13.17 pounds |
| Product Dimensions | 16.92 x 13.79 x 7.69 inches |
Warranty and Support
The JetsBath Rain Shower System comes with a 10-Year Limited Warranty for residential use and a 5-Year Limited Warranty for commercial use. This warranty covers manufacturing defects and ensures the quality of materials and workmanship.
For warranty claims, technical support, or any questions regarding your product, please refer to the contact information provided at the point of purchase or visit the official JetsBath website.
no relevant documents
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.