Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Bellemave Kids Twin House Bed with Storage Shelves and Twin Size Trundle. Please read all instructions carefully before beginning assembly and retain this manual for future reference. Proper assembly and care will ensure the longevity and safety of your product.
Safety Information
- Adult Assembly Required: This product requires adult assembly. Keep small parts away from children during assembly.
- Weight Capacity: The upper bed and trundle bed each have a maximum weight capacity of 220 lbs. Do not exceed this limit.
- Mattress Thickness: Recommended mattress thickness for the upper bed is 8-10 inches, and for the trundle bed is 6 inches.
- Regular Checks: Periodically check all bolts, screws, and fasteners to ensure they are tight and secure. Retighten as necessary.
- Placement: Place the bed on a flat, level surface. Avoid placing near windows where cords or blinds could pose a strangulation hazard.
- No Jumping: Do not allow children to jump on the bed.
Package Contents
Before assembly, ensure all components are present and undamaged. Refer to the parts list provided in your packaging. Typically, the package includes:
- Wood panels for bed frame, roof, and window sections.
- Wood slats for bed support.
- Components for the trundle bed.
- Shelving units and panels for storage.
- Hardware pack (screws, bolts, nuts, Allen wrench).
If any parts are missing or damaged, please contact Bellemave customer support immediately.
Setup and Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two adults for assembly.
- Unpack and Identify Parts: Lay out all components on a soft, clean surface to prevent scratches. Identify each part using the provided parts list.
- Assemble Main Bed Frame: Begin by connecting the side rails to the headboard and footboard panels using the provided hardware. Ensure all connections are secure but do not fully tighten until the frame is stable.
- Attach Roof and Window Sections: Securely attach the roof frame components and the decorative window panel to the main bed frame structure.
- Install Storage Shelves: Assemble and attach the storage shelving unit to the designated side of the bed frame. Ensure shelves are level and securely fastened.
- Insert Bed Slats: Place the wooden slats across the bed frame, ensuring even spacing. Secure them in place according to the instructions to provide proper mattress support.
- Assemble Trundle Bed: Assemble the trundle bed frame separately, including its slats and wheels. Once assembled, slide it under the main bed frame.
- Final Tightening: Once all components are in place and the bed is stable, go back and fully tighten all screws and bolts. Do not overtighten.
Image: Exploded view of the bed components, illustrating how the main bed, trundle, and storage unit fit together.
Image: The Bellemave Kids Twin House Bed fully assembled, showcasing the house-shaped frame, integrated storage shelves, and the trundle bed tucked underneath.
Operating Instructions
- Using the Trundle Bed: The twin size trundle bed is designed to slide smoothly in and out from under the main bed. Gently pull the trundle from its recessed handle to extend it. Push it back in when not in use to save space. Ensure the area around the bed is clear before extending or retracting the trundle.
- Utilizing Storage Shelves: The integrated storage shelves provide convenient space for books, toys, and other small items. Distribute weight evenly across the shelves and do not exceed the individual shelf weight capacity of 50 lbs.
Image: The trundle bed extended from beneath the main bed, demonstrating its pull-out functionality for an additional sleeping space.
Image: A detailed view of the storage shelves built into the side of the house bed, showing multiple compartments for organization.
Maintenance
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the finish.
- Hardware Checks: Regularly inspect all bolts, screws, and connections. Tighten any loose hardware to maintain structural integrity and safety.
- Avoid Moisture: Keep the bed dry and away from excessive moisture to prevent warping or damage to the wood.
Troubleshooting
- Squeaking Noises: If the bed squeaks, check all bolts and screws for tightness. Apply a small amount of lubricant (e.g., paraffin wax) to metal-on-metal or wood-on-wood contact points if necessary.
- Trundle Not Sliding Smoothly: Ensure the trundle wheels are clean and free of debris. Check that the trundle is properly aligned and not obstructed by bedding or other items.
- Wobbly Frame: A wobbly frame usually indicates loose hardware. Re-tighten all bolts and screws, ensuring the bed is on a level surface.
Specifications
| Feature | Detail |
|---|---|
| Overall Product Dimension | 87.6''L x 47.3''W x 71.1''H |
| Twin Bed Dimensions | 75.4'' x 39.2'' |
| Twin Trundle Bed Dimensions | 75'' x 39.2'' |
| Total Height | 71.1'' |
| Number of Bed Slats (Upper / Trundle) | 10pcs / 7pcs |
| Recommended Mattress Thickness (Upper / Trundle) | 8''-10'' / 6'' |
| Overall Product Weight | 156 lbs |
| Bed Weight Capacity (Upper / Trundle) | 220 lbs / 220 lbs |
| Each Shelf Weight Capacity | 50 lbs |
| Material | Pine Wood + MDF |
| Color | Grey |
| Assembly Required | Yes |
Image: Technical drawing showing all key dimensions of the bed, including length, width, height, and internal measurements for the bed and trundle.
Warranty and Support
Bellemave products are manufactured with quality and care. For specific warranty information, please refer to the documentation included with your purchase or contact Bellemave customer support directly. If you encounter any issues or have questions regarding your product, please reach out to our support team for assistance.
Contact Information: Please refer to your purchase receipt or the Bellemave official website for the most current customer service contact details.
