1. Introduction
This manual provides instructions for the safe and efficient operation of your SANSI LED Plant Lamp. Please read this manual thoroughly before use and retain it for future reference.
The SANSI LED Plant Lamp is designed to provide full-spectrum light for indoor plants, supporting all stages of growth from germination to fruiting. It features a flexible gooseneck design, a clip for easy attachment, and an integrated timer function.
2. Safety Instructions
- Ensure the power supply matches the product's voltage requirements (AC 220V).
- Do not use other fittings or bulbs not specified for this unit. The maximum safety performance is 10 watts per head.
- Keep the lamp away from water or damp environments.
- Do not disassemble or modify the product.
- Unplug the lamp before cleaning or maintenance.
- This product is intended for garden lighting only.
- The electrical connector is a UK style. An adapter may be required for use in other regions.
3. Package Contents
- SANSI LED Plant Lamp with 3 Gooseneck Lights and Clip
- Integrated Control Panel with Timer
- User Manual (this document)
4. Setup
- Unpack: Carefully remove all components from the packaging.
- Attach: Securely attach the clip to a stable surface such as a desk, plant stand, or shelf. Ensure the clip has a firm grip.
- Position Lights: Adjust the flexible goosenecks to position the LED bulbs over your plants. The goosenecks are 15.8 inches long, allowing for flexible placement.
- Connect Power: Plug the power cord into a suitable AC 220V power outlet. If necessary, use a compatible adapter for your region.
Image 1: SANSI LED Plant Lamp setup with three adjustable gooseneck lights and a clip for attachment.
Image 2: Product dimensions and features, including 6ft power cord and 15.8-inch goosenecks.
5. Operating Instructions
5.1 Power On/Off
Press the power button on the control panel to turn the lamp on or off.
5.2 Timer Function
The lamp features an automatic on/off timer. Once set, the timer operates on a 24-hour cycle. To set the timer:
- Press the timer button once for 4 hours of operation. The lamp will turn on for 4 hours and then turn off for 20 hours daily.
- Press the timer button a second time for 8 hours of operation. The lamp will turn on for 8 hours and then turn off for 16 hours daily.
- Press the timer button a third time for 12 hours of operation. The lamp will turn on for 12 hours and then turn off for 12 hours daily.
The timer cycle begins from the moment you set it. Ensure the power supply remains connected for the timer to function correctly.
Image 3: Control panel with timer options for 4, 8, and 12 hours.
5.3 Full Spectrum Lighting
The SANSI LED Plant Lamp provides a full spectrum of light (400nm to 780nm) to mimic natural sunlight, which is crucial for plant growth. This includes:
- Blue Light (400-499nm): Promotes germination and vegetative growth.
- Green Light (500-599nm): Meaningful for plant morphology.
- Red Light (600-699nm): Most helpful for growth, bloom, and fruiting.
- Far Red (700-780nm): Assists plants with shading and flowering.
Image 4: Full spectrum light distribution and its effects on plant growth stages.
6. Maintenance
- Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the lamp and bulbs. Do not use liquid cleaners.
- Bulb Replacement: The grow bulbs are replaceable. If a bulb needs replacement, ensure the power is off and unscrew the old bulb. Screw in a new SANSI compatible E27 base LED grow bulb. (Note: Maximum safety is 10W per head).
Image 5: Replaceable bulbs feature, ensuring longevity of the lamp.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | No power, loose connection, faulty outlet. | Check power cord connection. Test outlet with another device. Ensure power switch is on. |
| Timer function not working. | Power interruption, incorrect timer setting. | Ensure continuous power supply. Re-set the timer. |
| Bulb flickering or not lighting. | Loose bulb, faulty bulb. | Ensure bulb is screwed in tightly. Replace with a new SANSI compatible E27 bulb if necessary. |
| Gooseneck not holding position. | Excessive weight or improper positioning. | Adjust the gooseneck to a more stable position. Ensure the clip is securely fastened. |
| Product is 50Hz, but region uses 60Hz. | Incompatibility with regional electrical frequency. | While the product is rated for 50Hz, it may operate on 60Hz with potentially reduced bulb lifespan. Consult an electrician if concerned. |
| UK style connector. | Regional plug incompatibility. | Use a suitable adapter for your country's electrical outlets. |
8. Specifications
- Model: C23ZW018-T0030A27
- Power: 30W (Total), 10W per head (Max. safety)
- Input Voltage: AC 220V
- Frequency: 50Hz
- Light Spectrum: Full Spectrum (400nm-780nm)
- Luminous Flux: 3000 lm
- Bulb Base: E27
- Gooseneck Length: 15.8 inches
- Power Cord Length: 6 feet
- Product Dimensions: 22.2 x 19.7 x 11 cm
- Item Weight: 1.3 kg
- Material: Ceramic (Base/Shade), Polished (Finish)
- Switch Type: Push Button
- Timer Options: 4H / 8H / 12H
9. Warranty and Support
SANSI offers a lifetime protection plan for the lamp and a 2-year warranty for the bulbs. For warranty claims, technical support, or inquiries, please contact SANSI customer service.
Contact information can typically be found on the product packaging or the official SANSI website (www.sansiled.com).
Image 6: Product packaging displaying the SANSI website for support.
Image 7: Product label with UPC: 6942285502074.
