AIDITIYMI RG10A/BGEF
RG10A/BGEF AC A/C Remote Commander Replacement User Manual
Model: RG10A/BGEF, RG10A(B2S)/BGEF
Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your AIDITIYMI RG10A/BGEF series AC A/C Remote Commander Replacement. This remote is designed to be compatible with various Midea, Carrier, and System Air Conditioner models. Please read this manual thoroughly before using the remote control to ensure proper functionality and longevity.
Product Overview
The RG10A/BGEF remote control features an ergonomic design with clearly labeled buttons and a digital display for easy operation. Below are images illustrating the remote's appearance and key features.
Figure 1: Front View. This image shows the front of the white remote control, featuring a large LCD screen at the top, and an array of circular and rectangular buttons below it, including Power, Mode, Eco Gear, Set, OK, directional arrows, Fan, Swing, Boost, LED, and Clean buttons, along with a lock icon.
Figure 2: Angled View. This image provides an angled perspective of the remote control, highlighting its slim profile and the slight curvature of its design. The LCD screen and button layout are visible from this angle, showing the ergonomic shape.
Figure 3: Back View. This image displays the back of the remote control, showing the battery compartment cover and a label with product information. The label indicates "TYPE: RG10A/BGEF", "Rated voltage: 3VDC", and a note to "To prevent damage, remove the batteries when not being used for a long time."
Compatibility
This remote control is a replacement for the following Midea/Carrier/System Air Conditioner models:
- RG10 Series
- RG10A5(B1)/BGCEFU1
- RG10A(E2S)/BGEFU1
- RG10A1(E2S)/BGEF
- RG10A10(E2S)/BGEF
- RG10A2(E2S)/BGCEF
- RG10A2(E2S)/BGCEFU1
- RG10A2(E2S)/BGEFU1
- RG10B(E2)/BGEF
- RG10B1(E2)/BGEF
- RG10B10(E2)/BGCEF
- RG10B10(E2)/BGEF
- RG10B2(E2)/BGCEF
- RG10A(B2S)/BGEFU1
Setup
Battery Installation
The remote control requires two (2) 1.5V AAA type alkaline batteries (not included). Follow these steps to install the batteries:
- Locate the battery compartment on the back of the remote control.
- Slide the battery compartment cover downwards to open it.
- Insert two (2) AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the battery compartment cover back into place until it clicks securely.
Once batteries are installed, the remote is ready for use. No programming or pairing is required.
Operating Instructions
Basic Operation
Point the remote control directly at the air conditioner's receiver. Ensure there are no obstructions between the remote and the air conditioner. The effective range may vary depending on environmental conditions.
Button Functions
| Button | Function |
|---|---|
| Power (Orange) | Turns the air conditioner On or Off. |
| Mode | Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto). |
| Eco Gear | Activates energy-saving mode. |
| SET | Used for advanced settings or timer functions. |
| OK | Confirms selections. |
| Up/Down Arrows | Adjusts temperature settings or navigates menu options. |
| Left/Right Arrows | Navigates menu options or adjusts specific settings. |
| Time (Clock icon) | Sets or adjusts timer functions. |
| Fan (Fan icon) | Adjusts fan speed. |
| Swing | Controls the air conditioner's louver swing function. |
| People (Person icon) | May activate a "Follow Me" or "I Feel" function, sensing temperature at the remote's location. |
| Boost | Activates a rapid cooling or heating function. |
| LED | Turns the air conditioner's display light On or Off. |
| Clean | Initiates a self-cleaning function for the air conditioner. |
| Lock (Lock icon) | Locks the remote control buttons to prevent accidental changes. |
Note on Temperature Units: Some users have reported difficulty in changing the temperature display between Celsius and Fahrenheit. This remote is designed as a direct replacement, and its functionality for unit conversion is dependent on the original remote's capabilities and the air conditioner unit itself. If your air conditioner unit does not support this function via the remote, or if the original remote did not have this feature, this replacement remote may not be able to change the temperature unit.
Maintenance
Battery Replacement
Replace the batteries when the remote's display becomes dim, or if the remote becomes unresponsive. Always replace both batteries at the same time with new 1.5V AAA alkaline batteries.
Storage
If the remote control will not be used for an extended period (e.g., several months), it is recommended to remove the batteries to prevent potential leakage and damage to the remote.
Cleaning
Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the surface or internal components.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Remote is not responding to button presses. |
|
| Display is dim or blank. |
|
| Cannot change temperature units (Celsius/Fahrenheit). |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | QY-RG10A-BGEF-AC (also RG10A/BGEF, RG10A(B2S)/BGEF) |
| Product Dimensions | 8 x 2 x 0.6 inches |
| Item Weight | 2.82 ounces |
| Power Source | 2 x 1.5V AAA Batteries (Not Included) |
| Compatible Devices | Air Conditioner |
| Color | White |
| Special Feature | Ergonomic |
| Manufacturer | jiangyaqiu |
| Country of Origin | China |
Warranty and Support
Specific warranty information for this product is not provided within this manual. For details regarding warranty coverage, returns, or technical support, please refer to the product listing on the retailer's website or contact the seller directly.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.