Nuliie S32
Contents
Nuliie Hands-Free Breast Pump S32 User Manual
Model: S32
Product Overview
The Nuliie Hands-Free Breast Pump S32 is an electric wearable breast pump designed for convenience and efficiency. It offers a discreet and comfortable pumping experience, allowing users to multitask while expressing milk. This manual provides detailed instructions for the proper use, care, and maintenance of your S32 breast pump.
Key Features:
- Hands-Free Design: Allows for discreet and convenient pumping on the go.
- Multiple Modes & Levels: Features 2 modes and 9 adjustable suction levels for personalized comfort and efficiency.
- Comfortable Flange: Equipped with a 24MM comfortable flange, with options for other sizes.
- Memory Function: Remembers your last used settings for quick startup.
- Quiet Operation: Designed for ultra-quiet use, minimizing disturbance.
- Easy Assembly & Cleaning: Simple structure for quick setup and hygienic maintenance.

Components and Assembly
Package Contents:
Please check the package to ensure all components are present:
- Breast Pump Motor Unit (x2)
- Milk Collector Cup (x2)
- Silicone Flange (24mm, x2)
- Silicone Diaphragm (x2)
- Duckbill Valve (x2)
- USB-C Charging Cable (x2)
- User Manual
- Additional Flange Inserts (18mm, 21mm, x2 each)
- Breast Milk Storage Bags
Assembly Instructions:
- Ensure all parts are clean and dry before assembly.
- Insert the duckbill valve firmly into the bottom of the milk collector cup. Ensure it is securely seated to prevent leaks and maintain suction.
- Place the silicone diaphragm onto the top of the milk collector cup, ensuring it forms a tight seal.
- Attach the silicone flange to the milk collector cup. Press firmly around the edges to ensure a secure fit.
- Align the assembled milk collector cup with the breast pump motor unit. Press them together until they click into place.

Getting Started
Charging the Pump:
Before first use, fully charge the breast pump motor unit. Use the provided USB-C charging cable and connect it to a suitable power adapter (not included). The display will indicate charging status. A full charge typically takes approximately 1.5 hours.
Flange Size Selection:
Choosing the correct flange size is crucial for comfortable and efficient pumping. The S32 comes with a 24mm flange and additional 18mm and 21mm inserts. Refer to the guide below to determine your optimal size:

To find your size, measure the diameter of your nipple (not the areola) after a pumping session. Select the flange size that is 2-4mm larger than your nipple diameter. A correct fit ensures the nipple moves freely within the tunnel without excessive rubbing or discomfort.
Cleaning and Sterilization Before First Use:
Before using your Nuliie breast pump for the first time, disassemble all parts that come into contact with breast milk (milk collector cup, silicone flange, duckbill valve, silicone diaphragm). Wash them thoroughly with warm soapy water, rinse, and then sterilize them. Sterilization methods include boiling for 5 minutes, steam sterilization, or using a sterilizer designed for baby products.
Operation Guide
Wearing the Pump:
Once assembled, place the breast pump inside your nursing bra, ensuring the flange is centered over your nipple. Adjust your bra for a secure and comfortable fit. The pump should feel snug but not overly tight.
Powering On/Off:
- To Power On: Press and hold the power button on the motor unit for 2 seconds. The display will light up.
- To Power Off: Press and hold the power button for 2 seconds. The pump will automatically shut off after 30 minutes of continuous use.
Mode Selection:
The Nuliie S32 offers 2 modes: Massage Mode and Expression Mode. Press the 'M' button to switch between modes.
- Massage Mode: Indicated by a specific icon on the display. This mode uses rapid, shallow suction to stimulate milk let-down. It is recommended to start with this mode for 2-3 minutes.
- Expression Mode: Indicated by a different icon. This mode uses slower, deeper suction to efficiently express milk once let-down has occurred.
Suction Level Adjustment:
Each mode has 9 adjustable suction levels. Use the '+' and '-' buttons on the motor unit to increase or decrease the suction intensity. Start with a low level and gradually increase to a comfortable yet effective suction that does not cause pain.
Pumping Session:
A typical pumping session lasts between 15-30 minutes. The pump has a built-in timer displayed on the screen. The pump will automatically shut off after 30 minutes.



Care and Maintenance
Daily Cleaning:
After each use, disassemble all parts that come into contact with breast milk. Wash them immediately with warm water and mild dish soap. Use a soft brush to clean hard-to-reach areas. Rinse thoroughly with clean water.
Sterilization:
It is recommended to sterilize all milk-contacting parts at least once a day. You can boil them for 5 minutes, use a steam sterilizer, or a sterilizer specifically designed for breast pump parts.
Drying and Storage:
After cleaning and sterilization, allow all parts to air dry completely on a clean drying rack. Do not use cloth towels as they may leave lint. Once dry, store the assembled pump or individual parts in a clean, dry place away from direct sunlight and dust.
Note: Do not wash or immerse the breast pump motor unit in water. Wipe it clean with a damp cloth if necessary.
Troubleshooting
If you encounter any issues with your Nuliie S32 breast pump, please refer to the table below for common problems and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No suction or weak suction |
|
|
| Pump not turning on |
|
|
| Milk leakage |
|
|
| Uncomfortable pumping experience |
|
|
Product Specifications
| Specification | Value |
|---|---|
| Model | S32 |
| Product Dimensions | 4.45"L x 2.72"W x 4.96"H |
| Weight | 1.85 Pounds (approx. for 2 packs) |
| Material | Silicone |
| Input | 5V-1A |
| Operation Temperature | 5-40°C / 41-104°F |
| Storage Temperature | -20-60°C / -4-140°F |
| Operation/Storage Humidity | 15-90% |
| Operation/Storage Pressure | 90-106KPa |
Warranty and Support
Nuliie products are manufactured with high-quality materials and undergo strict quality control. This product is covered by a manufacturer's warranty against defects in materials and workmanship under normal use. Please refer to the warranty card included in your package for specific terms and conditions.
For any questions, concerns, or technical support, please contact Nuliie customer service:
- Email: support@nuliie.com
- Website: www.nuliie.com
Please have your model number (S32) and purchase information ready when contacting support.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.