1. Product Overview
This manual provides instructions for the assembly, use, and maintenance of your vidaXL Aquarium Stand. This stand is designed to provide stable support and secure display space for your fish tank, while also offering storage solutions.
Key Features:
- Durable Material: Constructed from engineered wood, offering a smooth surface, strength, stability, and resistance to moisture.
- Storage Function: Features ample storage space with compartments and shelves for fish feed, nets, disinfectants, water conditioner, and other items.
- Dimensions: 121 x 41 x 58 cm (47.6 x 16.1 x 22.8 inches) (W x D x H).
- Color: Sonoma Oak.
Image 1: The vidaXL Aquarium Stand in Sonoma Oak, supporting an aquarium and providing storage.
2. Safety Information
Please read all safety warnings and instructions carefully before assembly and use to prevent injury or damage to the product.
- Wall Attachment: To prevent the stand from overturning, this product must be used with the provided wall attachment device. Securely fasten the stand to a wall according to the assembly instructions.
- Weight Capacity: Ensure the weight of your aquarium and its contents (water, gravel, decorations, etc.) does not exceed the stand's maximum weight capacity. Overloading can cause structural failure.
- Level Surface: Always place the aquarium stand on a flat, level, and stable surface to prevent tipping and ensure even weight distribution.
- Water Exposure: While the engineered wood offers some moisture resistance, prolonged exposure to water should be avoided. Promptly wipe up any spills to prevent damage.
- Children and Pets: Keep children and pets away from the assembly area. Do not allow them to climb on or play with the assembled stand.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Assembly Instructions
Assembly is required for this product. Please follow the steps below carefully. It is recommended to have two people for assembly.
3.1. Unpacking and Preparation
- Open the packaging and carefully remove all components.
- Check the parts list against the contents to ensure all pieces are present and undamaged.
- Lay out all components on a clean, soft surface (e.g., a blanket or carpet) to prevent scratches.
3.2. Step-by-Step Assembly
- Assemble the Frame: Connect the side panels to the base and top panels using the provided hardware. Ensure all connections are secure.
- Install Shelves and Doors: Insert the shelves into the designated slots. Attach the doors to the cabinet using the hinges and screws. Adjust hinges as needed for proper door alignment.
- Attach Handles: Secure the handles to the doors.
- Wall Attachment: For safety, attach the stand to the wall using the provided anti-tip kit. This is crucial to prevent accidental tipping.
Image 2: The aquarium stand with its storage compartments and shelves visible.
3.3. Assembly Video Guide
For a visual guide on assembling a similar aquarium stand, please refer to the video below. While the design may vary slightly, the general assembly principles are applicable.
Video 1: General assembly guide for an aquarium stand. Note that the specific model shown in the video may differ from your product (e.g., material type), but the assembly steps are similar.
4. Usage Guidelines
Once assembled and securely placed, your vidaXL Aquarium Stand is ready for use.
- Placement: Position the stand in its final location before placing the aquarium. Ensure it is on a stable, level floor away from direct sunlight or heat sources.
- Aquarium Placement: Carefully place your aquarium on the top surface of the stand. Ensure it is centered and stable.
- Storage: Utilize the internal shelves and compartments for storing aquarium supplies such as fish food, water treatments, cleaning tools, and other accessories. Distribute weight evenly within the storage areas.
- Cable Management: If applicable, route power cords and tubing neatly to prevent tripping hazards and maintain a tidy appearance.
5. Care and Maintenance
Proper care will extend the life and maintain the appearance of your aquarium stand.
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
- Spills: Immediately wipe up any water spills from the aquarium to prevent moisture damage to the engineered wood.
- Dusting: Regularly dust the surfaces with a dry, soft cloth.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Avoid Overloading: Do not place items heavier than the stand's capacity on any shelf or the top surface.
6. Troubleshooting
If you encounter any issues with your aquarium stand, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Stand feels wobbly or unstable. | Uneven floor; loose connections; missing wall attachment. | Ensure the stand is on a level surface. Check and tighten all screws. Install or verify the wall attachment device. |
| Doors do not close properly or are misaligned. | Hinges are loose or improperly adjusted. | Adjust the door hinges according to the assembly instructions. Tighten hinge screws. |
| Scratches or minor surface damage. | Accidental impact or abrasive cleaning. | Use furniture repair markers or wood filler for minor scratches. Avoid abrasive materials for cleaning. |
7. Product Specifications
| Feature | Detail |
|---|---|
| Brand | vidaXL |
| Model Number | 833618 |
| Color | Sonoma Oak |
| Material | Engineered Wood |
| Dimensions (W x D x H) | 121 x 41 x 58 cm (47.6 x 16.1 x 22.8 inches) |
| Item Weight | 63.6 pounds |
| Mounting Type | Floor Mount |
| Assembly Required | Yes |
Image 3: Dimensional diagram of the aquarium stand.
