BUVAYE TS03 Portable Car Jump Starter with Air Compressor Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your BUVAYE TS03 Portable Car Jump Starter with Air Compressor. This multi-functional device is designed to provide emergency jump-starting for vehicles, inflate tires, and serve as a portable power bank and emergency light source. Please read this manual thoroughly before first use and retain it for future reference.

Image 1.1: The BUVAYE TS03 Portable Car Jump Starter with Air Compressor, showcasing its compact design and integrated features.

2. Product Features

The BUVAYE TS03 combines several essential automotive tools into one compact and powerful unit:

• Powerful Jump Starter: Delivers a 2000A peak current, capable of starting 12V vehicles with up to 7.0L gas or 5.0L diesel engines. Provides up to 20 jump starts on a single charge.
• Smart Tire Inflator: Integrated digital air compressor with a unique Turbocharged Movement. Offers a maximum pressure of 150 PSI and an airflow of 35L/Min. Features tire-pressure detection, preset value stopping, and unit switching (PSI, KPA, BAR, KG/CM²). Suitable for various inflatables including car tires, bike tires, and sports balls.
• Enhanced Thermal Design: Features a honeycomb heat dissipation design for improved safety and extended product lifespan.
• Emergency LED Light: Equipped with a 5W LED camping light providing significant brightness. Includes three modes: Stable, Strobe, and SOS for various emergency situations.
• LCD Screen: Clear LCD display shows internal battery status and real-time tire pressure readings.
• Portable Power Bank: Functions as a power bank to charge electronic devices via its USB-C port.

Image 2.1: Illustration of the upgraded battery capacity, indicating its ability to provide multiple uses on a single charge.

3. Safety Information

To ensure safe operation and prevent damage to the device or injury, please observe the following safety precautions:

• Read all instructions before using the product.
• Keep the device away from children.
• Do not short-circuit the jump starter clamps.
• Do not disassemble the unit. Refer all servicing to qualified personnel.
• Use the jump starter only for 12V lead-acid batteries. Do not use it for other types of batteries.
• Ensure proper ventilation during use, especially when operating the air compressor.
• Air Compressor Usage: Do not use the air pump function continuously for extended periods. If the tire compressor becomes seriously hot, allow it to cool down for several minutes before resuming inflation.
• The jump starter is designed to instantly start your 12V vehicle; it does not support charging the car battery.
• Avoid exposing the device to rain or extreme temperatures.

4. Setup and Initial Charging

Before first use, fully charge the BUVAYE TS03 unit. It comes with 4 Lithium Ion batteries included.

1. Connect the provided charging cable to the unit's charging port.
2. Connect the other end of the charging cable to a suitable USB power adapter (not included) or a powered USB port.
3. The LCD screen will indicate the charging status. Charge until the battery indicator shows a full charge.
4. It is recommended to fully charge the unit every 3-6 months to maintain battery health, even if not in use.

Image 4.1: The LCD screen provides accurate readings for internal battery status and tire pressure.

5. Operating Instructions

5.1. Jump Starting a Vehicle

Use this function to start a dead 12V vehicle battery.

1. Ensure the jump starter is sufficiently charged (at least 25% power is typically enough).
2. Turn off your vehicle's ignition and all accessories.
3. Connect the red (positive, +) clamp to the positive terminal of your vehicle's battery.
4. Connect the black (negative, -) clamp to the negative terminal of your vehicle's battery.
5. Ensure the clamps are securely attached and there is good contact.
6. Turn on the BUVAYE TS03 jump starter. The LCD screen may indicate readiness.
7. Start your vehicle's engine. If it doesn't start immediately, wait 30 seconds and try again. Do not crank for more than 3 seconds per attempt.
8. Once the vehicle starts, immediately disconnect the black (negative) clamp first, then the red (positive) clamp.
9. Store the jump starter safely.

Image 5.1: The BUVAYE TS03 jump starter connected to a car battery, ready to provide a boost.

5.2. Using the Air Compressor

Inflate tires or other inflatables using the integrated air compressor.

1. Connect the air hose to the inflation port on the BUVAYE TS03.
2. Attach the other end of the air hose to the valve stem of the tire or inflatable item.
3. Turn on the unit. The LCD screen will display the current pressure.
4. Use the control buttons to set the desired pressure (PSI, KPA, BAR, KG/CM²). Refer to your vehicle's manual or tire sidewall for recommended pressure.
5. Press the start button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
6. Disconnect the air hose and store it properly.
7. Important: If the unit becomes hot during prolonged use, allow it to cool down for several minutes before continuing.

Image 5.2: The BUVAYE TS03 air compressor in use, inflating a car tire. Its triangular horizontal design provides stability during operation.

5.3. Using the LED Emergency Light

The integrated LED light provides illumination and emergency signaling.

1. Press the light button to cycle through the different modes: Stable (constant on), Strobe (flashing), and SOS (Morse code for distress).
2. Press again to turn off the light.

Image 5.3: Examples of the BUVAYE TS03's LED light in use, demonstrating its versatility for roadside emergencies, camping, and general illumination.

5.4. Using as a Portable Power Bank

Charge your electronic devices on the go.

1. Connect your device's charging cable to the USB-C output port on the BUVAYE TS03.
2. The unit will automatically begin charging your device.
3. Monitor your device's charging status.

6. Maintenance

Proper maintenance ensures the longevity and optimal performance of your BUVAYE TS03.

• Recharging: Recharge the unit after each use, especially after jump-starting a vehicle or using the air compressor extensively.
• Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage.
• Cleaning: Wipe the exterior with a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.
• Battery Health: For optimal battery life, recharge the unit at least once every 3-6 months, even if it has not been used.

7. Troubleshooting

If you encounter issues with your BUVAYE TS03, refer to the following common problems and solutions:

If troubleshooting steps do not resolve the issue, please contact BUVAYE customer support for further assistance.

8. Specifications

Detailed technical specifications for the BUVAYE TS03:

9. Warranty and Support

For warranty information, technical support, or any inquiries regarding your BUVAYE TS03, please contact BUVAYE customer service. Details on warranty coverage and how to reach support are typically provided with your purchase documentation or on the official BUVAYE website.

No relevant official product videos were found for this model.