1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your ARCORA Traditional Brushed Nickel Pot Filler Faucet. Designed for convenience and efficiency, this wall-mounted faucet allows for easy filling of pots directly on your stovetop. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.
2. Safety Information
- Cold Water Only: This pot filler faucet is designed exclusively for cold water supply. Connecting it to a hot water line may cause damage or malfunction.
- Shut-off Handles: Always ensure both handles are fully closed when the pot filler is not in use or left unattended to prevent accidental water flow or leaks.
- Professional Installation Recommended: If you are unfamiliar with plumbing installations, it is advisable to consult a qualified plumber to ensure correct and secure setup.
- Water Supply: Before any installation or maintenance, turn off the main water supply to prevent water damage.
- Inspection: Regularly inspect the faucet for any signs of wear, damage, or leaks. Address any issues promptly.
3. Package Contents
Verify that all components listed below are present in your package:
- Pot Filler Faucet (Brushed Nickel)
- Installation Guide
- Accessory Kit (rubber plug, sealing waterproof tape, screws, six-pin wrench)
- Installation Adapter
- Base & Gasket
- Hex Key
- Screws & Fischer Nylon Anchor
- Wrench
- Teflon Tape
- NPT 1/2" to G 1/2" Brass Connector
- 4 GPM Aerator (additional)
Figure 1: All components included in the ARCORA Pot Filler Faucet package.
4. Specifications
| Feature | Specification |
|---|---|
| Brand | ARCORA |
| Model Name | AR7106800 |
| Mounting Type | Wall Mount |
| Finish Type | Brushed Nickel |
| Material | Brass |
| Number of Handles | 2 |
| Spout Reach | 24 Inches (Dual Swing Joint) |
| Maximum Flow Rate | 4 Gallons Per Minute (GPM) with included aerator |
| Product Dimensions | 24 x 13 x 9 inches |
| Item Weight | 3.89 pounds |
5. Installation
Follow these steps for proper installation of your ARCORA Pot Filler Faucet. Ensure the main water supply is turned off before beginning.
- Prepare the Wall Connection: Ensure you have a standard 1/2 NPT threaded water supply line ready at the desired installation point above your stovetop.
- Install the Brass Connector: Apply Teflon tape to the threads of the provided 1/2" NPS to 1/2" NPT brass connector. Screw the short thread side (NPT 1/2) into the wall connection and the long thread side (G1/2) will connect to the faucet. Ensure it is securely tightened.
- Mount the Base: Position the faucet base over the brass connector. Mark the positions for the expansion screws. Drill holes using an electric drill at the marked points. Insert the Fischer Nylon Anchors into the drilled holes.
- Secure the Faucet: Attach the faucet to the wall using the provided screws, ensuring the base is flush and stable. Use a 1.5mm Allen wrench to fasten the pot filler to the flange, ensuring the faucet doesn't wobble or tilt.
- Connect the Faucet Body: Carefully attach the main body of the pot filler faucet to the installed base and brass connector. Ensure all connections are tight to prevent leaks.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, turn off the water supply and re-tighten the connections.
Figure 2: Detailed installation steps for the pot filler faucet.
Video 1: Official ARCORA Pot Filler Faucet Installation Video. This video demonstrates the step-by-step process for installing the faucet.
6. Operation
Your ARCORA Pot Filler Faucet features a dual-handle design and a 360° dual swing joint for maximum flexibility.
- Activating Water Flow: To dispense water, turn both the handle closest to the wall and the handle at the spout to the 'ON' position. Water will flow from the spout.
- Adjusting Position: The faucet features a 360° dual swing joint, allowing you to extend and position the spout over any burner on your stovetop. The 24-inch reach accommodates various pot sizes and stove configurations.
- Stopping Water Flow: To stop the water, turn both handles to the 'OFF' position. Always ensure both handles are fully closed when not in use.
Figure 3: The dual 360° swing joints allow for versatile positioning.
Video 2: ARCORA Pot Filler Faucet in use over a stove. This video demonstrates the practical application and flexibility of the faucet.
7. Maintenance
Regular maintenance ensures the optimal performance and appearance of your pot filler faucet.
- Cleaning: Clean the faucet regularly with a soft, damp cloth and mild soap. Avoid abrasive cleaners, harsh chemicals, or scouring pads, as these can damage the brushed nickel finish.
- Drip-Free Cartridge: The faucet is equipped with a high-quality drip-free brass cartridge designed for long-term use without dripping or leaking.
- Aerator Maintenance: The faucet includes a 1.8 GPM aerator for efficient flow and an additional 4 GPM aerator for faster filling. Periodically unscrew the aerator from the spout and clean any mineral deposits or debris to maintain optimal water flow.
Figure 4: Internal components including the drip-free brass cartridge and aerator.
8. Troubleshooting
If you encounter any issues with your pot filler faucet, refer to the common problems and solutions below:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water Leakage | Loose connections, damaged O-rings/gaskets, improper Teflon tape application. | Ensure all connections are tightened. Replace worn O-rings or gaskets. Reapply Teflon tape correctly. |
| Low Water Flow | Clogged aerator, low water pressure. | Remove and clean the aerator. Check your home's water pressure. |
| Faucet Wobbles | Loose mounting screws. | Tighten the mounting screws on the base plate using the hex key. |
If the issue persists after attempting these solutions, please contact ARCORA customer support for further assistance.
9. Warranty and Support
Your ARCORA Traditional Brushed Nickel Pot Filler Faucet (Model AR7106800) is covered by a 5-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact ARCORA customer service through the retailer where the product was purchased or visit the official ARCORA website for contact information.
Please retain your proof of purchase for warranty validation.
