Emerson EAS-3002 Portable Bluetooth Retro Radio Instruction Manual

1. Product Overview

The Emerson EAS-3002 Portable Bluetooth Retro Radio combines classic aesthetics with contemporary technology, offering a versatile audio experience. Enjoy your favorite music and radio stations with ease, whether at home or on the go.

Figure 1: Front view of the Emerson EAS-3002 radio.

Key Features:

• Vintage Design with Modern Features: Classic aesthetics with advanced audio technology.
• Bluetooth Connectivity: Stream music wirelessly from Bluetooth-enabled devices up to 30 feet away.
• Built-in Rechargeable Battery: Provides hours of continuous playtime for portable use.
• AM/FM Tuner: Easy-to-use analog tuner for clear reception of radio broadcasts.
• USB & SD Card Ports: Play digital music files directly from USB drives or SD cards.
• 3.5mm Headphone Jack: For private listening.
• Carrying Handle: For easy portability.

What's in the Box:

• Emerson EAS-3002 Portable Bluetooth Retro Radio
• USB Charging Cable
• User Manual (this document)

2. Setup

2.1 Charging the Battery

The EAS-3002 features a built-in rechargeable Lithium-Ion battery. Before first use, fully charge the device using the provided USB charging cable.

1. Connect the small end of the USB charging cable to the DC 5V input port on the back of the radio.
2. Connect the large end of the USB cable to a standard USB power adapter (not included) or a computer's USB port.
3. The charging indicator light will illuminate during charging and turn off when fully charged.

The radio can also operate using 4 x AA batteries (not included) for extended portable use. Insert batteries into the compartment on the back, ensuring correct polarity.

Figure 2: Back view of the radio with DC 5V input and battery compartment.

2.2 Antenna Setup

For optimal AM/FM reception, extend the telescoping antenna located on the back of the unit. Adjust its position for the best signal clarity.

Figure 3: Radio with its telescoping antenna extended for improved reception.

3. Operating Instructions

3.1 Power On/Off and Volume Control

Locate the power/volume knob on the side of the radio. Rotate it clockwise to turn the unit on and increase the volume. Rotate counter-clockwise to decrease volume and turn the unit off.

3.2 AM/FM Radio Operation

1. Turn the radio on using the power/volume knob.
2. Select either 'AM' or 'FM' band using the band selector switch, usually located on the top or side.
3. Rotate the tuning knob to scan for available radio stations. The frequency dial will indicate the current station.
4. Adjust the telescoping antenna for optimal reception.

Figure 4: Close-up of the AM/FM tuner dial.

3.3 Bluetooth Connectivity

Stream audio wirelessly from your smartphone, tablet, or other Bluetooth-enabled devices.

1. Turn the radio on and select 'BT' (Bluetooth) mode using the band selector switch. The radio will enter pairing mode, indicated by a flashing LED.
2. On your device, enable Bluetooth and search for available devices.
3. Select 'EAS-3002' from the list of devices to pair. Once connected, a steady LED light will indicate successful pairing.
4. You can now play audio from your device through the radio.

Figure 5: Wireless music streaming via Bluetooth.

3.4 USB/SD Card Playback

Play your personal digital music collection directly from a USB flash drive or SD card.

1. Insert a USB flash drive into the USB port or an SD card into the SD card slot.
2. The radio should automatically switch to USB/SD mode and begin playback. If not, select 'USB/SD' mode using the input selector.
3. Use the radio's controls (if available) or your connected device to navigate tracks.

Figure 6: Inserting an SD card for digital media playback.

3.5 AUX Input

Connect external audio devices using the 3.5mm AUX input.

1. Connect one end of a 3.5mm audio cable (not included) to the AUX input jack on the radio.
2. Connect the other end to the headphone jack or audio output of your external device.
3. Select 'AUX' mode on the radio.
4. Play audio from your external device.

Figure 7: Connecting an external device via the 3.5mm AUX port.

3.6 Headphone Jack

For private listening, plug any standard 3.5mm headphones into the headphone jack located on the side of the radio. The internal speaker will automatically mute.

Figure 8: Using the 3.5mm headphone jack for private listening.

4. Maintenance

4.1 Cleaning

Wipe the exterior of the radio with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.

4.2 Battery Care

If using external AA batteries, remove them if the unit will not be used for an extended period to prevent leakage. For the built-in Lithium-Ion battery, charge it periodically to maintain its lifespan, even if not in regular use.

5. Troubleshooting

5.1 No Power

• Ensure the power/volume knob is turned clockwise to the 'ON' position.
• If using the built-in battery, ensure it is charged. Connect the USB charging cable.
• If using external batteries, check if they are inserted correctly and are not depleted. Replace if necessary.

5.2 Poor Radio Reception

• Fully extend the telescoping antenna.
• Adjust the position and direction of the antenna for the best signal.
• Move the radio to a different location, away from potential interference sources like other electronic devices.

5.3 Bluetooth Not Connecting

• Ensure the radio is in 'BT' mode and in pairing mode (flashing LED).
• Make sure Bluetooth is enabled on your external device.
• Ensure your device is within 30 feet of the radio.
• If previously paired, try unpairing and re-pairing the device.

6. Specifications

Figure 9: Product dimensions and weight.

7. Product Overview Video

8. Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Emerson website. Keep your purchase receipt for warranty claims.