Philips LED 567321

Download PDF
Contents

Philips MR16 Dimmable LED Bulb User Manual

Model: 567321

1. Introduction

Thank you for choosing Philips MR16 Dimmable LED Bulbs. These bulbs are designed to provide high-quality, energy-efficient lighting with a warm white glow and dimming capabilities. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs.

Philips MR16 Dimmable LED bulb 3-pack packaging with one bulb outside the box.

This image displays the Philips MR16 Dimmable LED bulb 3-pack, highlighting its 'Bright White' light, 50W incandescent replacement (4W LED), 380 lumens brightness, and an estimated energy cost of $0.49 per year. One bulb is shown separately next to the packaging.

2. Safety Information

Please read and understand all safety instructions before installing or using these bulbs. Failure to follow these instructions may result in electric shock, fire, or other hazards.

  • Risk of Electric Shock: Always turn off the power supply at the circuit breaker or fuse box before installation, removal, or inspection.
  • Indoor Use Only: These bulbs are designed for indoor use in dry locations. Do not use in wet or damp environments unless specifically rated for such conditions.
  • Dimmable: These bulbs are dimmable. Ensure compatibility with your dimmer switch. Using an incompatible dimmer may cause flickering or damage to the bulb.
  • Operating Temperature: Do not use in enclosed fixtures that restrict airflow, as this may shorten the bulb's lifespan.
  • Proper Disposal: Dispose of bulbs according to local regulations. Do not dispose of with general household waste.
  • Not for Emergency Lighting: These bulbs are not intended for use with emergency exit fixtures or emergency lights.

3. Setup & Installation

Follow these steps to safely install your Philips MR16 LED bulbs:

  1. Turn Off Power: Before beginning, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
  2. Allow Cooling: If replacing an existing bulb, allow the old bulb to cool completely before handling.
  3. Remove Old Bulb: Carefully remove the existing MR16 bulb from the fixture. For GU10 bases, gently twist counter-clockwise and pull down.
  4. Insert New Bulb: Align the two pins of the Philips MR16 LED bulb (GU10 base) with the sockets in the fixture. Gently push the bulb into the socket and twist clockwise until it is securely seated. Do not overtighten.
  5. Restore Power: Once the bulb is securely installed, restore power to the fixture at the circuit breaker or fuse box.
  6. Test: Turn on the light switch to confirm the bulb is working correctly.
Close-up view of a single Philips MR16 Dimmable LED bulb with GU10 base.

A detailed view of a single Philips MR16 Dimmable LED bulb, showcasing its reflector shape and the GU10 twist-and-lock base with two pins.

4. Operating Instructions

These Philips MR16 LED bulbs are designed for simple operation and offer dimming functionality.

  • Standard Operation: Simply turn on the light switch to illuminate the bulb.
  • Dimming Functionality: If connected to a compatible dimmer switch, you can adjust the light output from full brightness to a lower, softer glow. Ensure your dimmer is rated for LED bulbs to prevent performance issues.
  • Light Quality: These bulbs provide a 3000 Kelvin Warm White light, ideal for creating a comfortable and inviting atmosphere. With a Color Rendering Index (CRI) of 90, they ensure colors appear vibrant and true.
Two people comfortably reading in a living room illuminated by Philips EyeComfort lighting.

This image illustrates the 'EyeComfort' feature of Philips lighting, showing two individuals relaxing and reading in a well-lit living room, suggesting comfortable and eye-friendly illumination.

Chart explaining different color temperatures from 2000 Kelvin to 5000 Kelvin.

A visual guide demonstrating how different color temperatures affect room ambiance, ranging from Amber Light (2000-2200K) to Daylight (5000K). It explains that lower Kelvin values provide warmer light, while higher values provide cooler light.

Comparison of low Color Rendering Index LED light versus Color Rendering Index 90 light on strawberries.

This image compares the visual quality of light, showing how a low Color Rendering Index (CRI) LED light makes strawberries appear dull, while a CRI 90 light reveals their vibrant, true colors. It emphasizes that Philips LED CRI90 bulbs show true color.

5. Maintenance

Philips MR16 LED bulbs require minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

  • Cleaning: Ensure the power is off and the bulb is cool before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid or abrasive cleaners, as they may damage the bulb.
  • Inspection: Periodically inspect the bulb and fixture for any signs of damage or loose connections.
  • Replacement: These LED bulbs have a long average life of 25,000 hours. Replace the bulb when its light output significantly diminishes or it ceases to function.

6. Troubleshooting

If you encounter issues with your Philips MR16 LED bulb, refer to the following common troubleshooting steps:

  • Bulb Not Lighting Up:
    • Check if the power switch is on.
    • Ensure the bulb is securely seated in the fixture. Turn off power, remove, and reinsert the bulb.
    • Verify that the circuit breaker or fuse for the fixture is not tripped.
    • Test the bulb in a different, known-working fixture to rule out a faulty bulb or fixture.
  • Flickering or Dimming Issues:
    • Ensure your dimmer switch is compatible with LED bulbs. Incompatible dimmers can cause flickering.
    • Check for loose connections in the fixture or wiring.
    • Ensure the bulb is not used in an enclosed fixture that causes overheating.
  • Reduced Brightness:
    • If using a dimmer, ensure it is set to maximum brightness.
    • Over time, LED bulbs may experience slight lumen depreciation, but significant reduction could indicate a faulty bulb or power supply issue.

7. Specifications

Feature Detail
Brand Philips LED
Model Number 567321
Light Type LED
Special Feature Dimmable
LED Wattage 4 Watts (50W Incandescent Equivalent)
Bulb Shape Size MR16
Bulb Base GU10
Light Color Warm White
Color Temperature 3000 Kelvin
Brightness 380 Lumens
Color Rendering Index (CRI) 90
Beam Angle 35 Degrees
Average Life 25,000 Hours
Indoor/Outdoor Usage Indoor
Power Source Mains Powered
Product Dimensions 2.16 x 1.97 x 2.13 inches
Item Weight 1.41 pounds (for the pack)

8. Warranty & Support

Warranty Information: Philips LED bulbs come with a 3-year warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please visit the official Philips Lighting website or contact their customer service department. Refer to the product packaging for specific contact details or visit www.philips.com/lighting.

© 2023 Philips LED. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.