Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your DASAN Waterfall Tub Filler Faucet with Hand Shower. Please read all instructions carefully before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.
Safety Information
- Always turn off the main water supply before beginning any plumbing work.
- Wear appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Ensure all connections are secure to prevent leaks.
- Do not use harsh chemicals or abrasive cleaners on the faucet finish.
Package Contents
Verify that all components are present before beginning installation.
Image: Exploded view of faucet components.
- Waterfall Tub Spout
- Single Handle Control Valve (with rough-in valve)
- Hand Shower
- Shower Hose (59 inches)
- Hand Shower Holder
- Mounting Hardware and Seals
Specifications
Image: Product dimensions diagram.
| Feature | Detail |
|---|---|
| Brand | Dasan |
| Model Number | SA-TF01WH-BN |
| Color | Brushed Nickel |
| Finish Type | Brushed |
| Number of Handles | 1 |
| Handle Material | Copper Stainless Steel |
| Mounting Type | Wall Mount |
| Tub Spout Width | 3.94 inches (100mm) |
| Rough-in Valve | Solid brass, 40mm cUPC certified ceramic disc cartridge |
| Shower Hose Length | 59 inches |
Setup and Installation
Professional installation is recommended. Ensure you have all necessary tools and materials before starting.
Pre-Installation Checks
- Confirm wall structure can support the faucet and rough-in valve.
- Ensure water supply lines are accessible and can be shut off.
- Review local plumbing codes for compliance.
Installation Steps
- Prepare the Wall: Cut appropriate openings in the wall for the rough-in valve, tub spout, and hand shower holder according to the product dimensions and desired layout. Ensure proper spacing for the chosen mounting style (e.g., widespread or stacked).
Image: Mounting style options.
- Install Rough-in Valve: Secure the solid brass rough-in valve within the wall opening. Connect the hot and cold water supply lines to the designated inlets on the valve. Ensure the valve is level and properly secured to the wall studs.
- Connect Tub Spout: Connect the water outlet from the rough-in valve to the tub spout. Ensure all connections are watertight. Mount the waterfall tub spout securely to the wall.
- Install Hand Shower Holder: Position and secure the hand shower holder to the wall at a convenient height. Connect the shower hose to the rough-in valve outlet and then to the hand shower.
- Install Trim Plates and Handle: Once all internal plumbing is complete and tested for leaks, install the decorative trim plates and the single handle control lever onto the rough-in valve.
- Final Checks: Turn on the main water supply. Check all connections for leaks. Test the functionality of the tub spout and hand shower.
Operating Instructions
Water Flow and Temperature Control
- Turn On/Off: Lift the single handle to turn on the water flow. Push down to turn off.
- Adjust Temperature: Rotate the handle left for hot water and right for cold water. Adjust to your desired temperature.
- Adjust Flow Rate: The height to which the handle is lifted controls the water flow rate.
Switching Between Tub Spout and Hand Shower
The diverter knob, typically located on the control valve trim plate, allows you to switch water flow between the waterfall tub spout and the hand shower.
- For Tub Spout: Ensure the diverter knob is in the position that directs water to the tub spout. Water will flow from the wide waterfall spout.
Image: Waterfall tub spout in use.
- For Hand Shower: Pull or push the diverter knob to redirect water flow to the hand shower. The hand shower provides a focused stream for rinsing or cleaning.
Image: Handheld shower sprayer.
Maintenance
- Cleaning: Clean the faucet regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for brushed nickel finishes. Rinse thoroughly with water and dry with a soft cloth to prevent water spots.
- Avoid Harsh Cleaners: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or bleach, as these can damage the finish and void your warranty.
- Check for Leaks: Periodically inspect all connections for any signs of leaks and tighten if necessary.
- Cartridge Maintenance: If you experience persistent dripping or difficulty adjusting temperature, the ceramic disc cartridge may need cleaning or replacement. Consult a professional plumber for this service.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Low Water Flow | Clogged aerator or debris in water lines. | Remove and clean the aerator. Flush water lines. Check water supply pressure. |
| Leaks from Faucet Base | Loose connections or damaged seals. | Tighten mounting nuts. Inspect and replace seals if worn. |
| Dripping Faucet | Worn or faulty ceramic disc cartridge. | Replace the ceramic disc cartridge. (Professional service recommended) |
| Water Not Diverting Properly | Diverter mechanism issue or debris. | Inspect diverter for obstructions. Ensure diverter knob is fully engaged. |
| Hand Shower Hose Leaks | Loose connection or damaged washer. | Tighten hose connections. Replace rubber washers if damaged. |
Warranty and Support
Dasan products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your purchase or contact Dasan customer service. Keep your proof of purchase for warranty claims.
For technical assistance or replacement parts, please contact Dasan customer support through their official website or the retailer where the product was purchased.
No Relevant Videos Found
No official product videos from the seller were found that are relevant for inclusion in this instruction manual.