1. Introduction
This manual provides detailed instructions for the safe and effective use of your ACEGMET by MiLESEEY DTX-10 Digital Laser Measuring Tape. This device combines a traditional tape measure with a digital display, a laser distance meter, and an extended laser line for versatile measurement applications. Please read this manual thoroughly before operating the device and retain it for future reference.
Safety Warning: This product contains a Class II laser. Do not stare directly into the laser beam. Avoid direct eye exposure.
2. Product Overview
The DTX-10 integrates three measurement functions: a traditional steel tape measure, a digital readout for the tape, and a laser distance measurement function. It features an automatic lock mechanism for the tape and an intuitive digital display.

Image 2.1: The ACEGMET by MiLESEEY DTX-10 Digital Laser Measuring Tape, showing its integrated design with both tape and laser components.
2.1 Key Components
- Digital Display: Shows measurements from both tape and laser.
- Laser Emitter/Receiver: For laser distance measurements.
- Steel Tape Measure: Traditional tape with automatic lock.
- Control Buttons: Power, mode selection, measurement activation, unit conversion.
- Charging Port: For recharging the internal battery.
3. Setup
3.1 Battery Installation and Charging
The DTX-10 is powered by an internal Lithium-polymer battery. Before first use, ensure the device is fully charged.
- Locate the charging port on the device.
- Connect the provided charging cable to the device and a suitable USB power adapter (not included).
- The charging indicator will illuminate. Charging is complete when the indicator changes color or turns off (refer to device display for battery status).
Note: The manufacturer specifies that the battery cover may need to be unscrewed to access the charging port. Refer to the device for exact location.
3.2 Powering On/Off
- To Power On: Press and hold the Power button until the display illuminates.
- To Power Off: Press and hold the Power button until the display turns off. The device may also power off automatically after a period of inactivity to conserve battery.
4. Operating Instructions
4.1 Digital Tape Measure Operation
The DTX-10 features a traditional steel tape measure with an integrated digital display for instant, precise readouts.
- Gently pull out the steel tape measure to the desired length. The tape will automatically lock in place.
- Observe the measurement on the digital display. This provides a clear, real-time reading, eliminating manual interpretation errors.
- To retract the tape, press the tape release button.

Image 4.1: A close-up view of the DTX-10's digital display showing a real-time measurement from the extended tape measure.
4.2 Laser Distance Measurement
Utilize the laser function for quick and accurate distance measurements.
- Press the Laser button to activate the laser. A red laser dot will appear.
- Aim the laser at the target point.
- Press the Laser button again to take a measurement. The distance will be displayed on the screen.
- The device may offer continuous measurement mode, allowing you to move the device and see real-time distance updates.

Image 4.2: A user demonstrating the laser distance measurement capability of the DTX-10, aiming the red laser at a wall.
4.3 Incremental Measurement
The DTX-10 supports incremental measurements, useful for marking out repetitive distances or small changes.
- Activate the incremental measurement mode (refer to device-specific button functions).
- Take a base measurement.
- Move the device and take subsequent measurements. The display will show the incremental difference from the previous point.

Image 4.3: The DTX-10's digital display illustrating incremental measurements, showing consistent 0.120m segments.
4.4 Unit Conversion
The device supports various units of measurement (e.g., meters, feet, inches). Press the Unit button to cycle through available units.
4.5 App Synchronization
The DTX-10 can connect to a dedicated mobile application for enhanced functionality, data management, and project organization.
- Download the official MiLESEEY app from your device's app store.
- Enable Bluetooth on your mobile device and the DTX-10.
- Open the app and follow the on-screen instructions to pair your DTX-10.
- Once connected, measurements can be wirelessly synchronized, stored, and managed within the app, including creating floor plans or project layouts.

Image 4.4: A smartphone screen showing the MiLESEEY app with synchronized measurement data, including a floor plan layout.
5. Maintenance
5.1 Cleaning
- Wipe the device with a soft, dry cloth.
- Do not use abrasive cleaners or solvents.
- Keep the laser lens clean for accurate measurements.
5.2 Tape Replacement
The steel tape blade of the DTX-10 is designed to be replaceable, extending the lifespan of the tool.
- Ensure the device is powered off.
- Locate the screws securing the tape mechanism (refer to the device diagram or manufacturer's instructions for exact locations).
- Carefully remove the screws and the old tape cartridge.
- Insert a new, compatible replacement tape cartridge.
- Secure the new cartridge with the screws.

Image 5.1: An exploded view of the DTX-10's internal mechanism, highlighting the replaceable tape blade and its securing screws.
5.3 Storage
Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Device not powering on: Ensure the battery is charged. Connect to a power source and try again.
- Inaccurate measurements:
- For laser measurements, ensure the laser lens is clean and the target surface is reflective enough.
- For tape measurements, ensure the tape is fully extended and not bent.
- Check the measurement reference point setting (front or rear of the device).
- Bluetooth connection issues: Ensure Bluetooth is enabled on both devices. Restart both the DTX-10 and your mobile device. Re-pair through the app.
- Display not working: Check battery level. If fully charged, try resetting the device (if a reset option is available, refer to specific device instructions).
7. Specifications
| Feature | Specification |
|---|---|
| Model Number | DTX10 |
| Dimensions (L x W x H) | 21 x 9.5 x 4.5 cm |
| Weight | 500 Grams |
| Laser Class | Class II |
| Laser Type | 635 nm < 1 mW |
| Measurement Accuracy (Tape Blade) | ± 1.5 mm |
| Measurement Accuracy (Digital) | < 1 mm |
| Measurement Accuracy (Laser Distance) | ±(2.0 mm + 5 × 10-5D) |
| Tape Lock Type | Auto-lock |
| Battery Type | 1 Lithium-polymer (included) |
8. Safety Information
- Laser Safety: This device emits a Class II laser. Do not look directly into the laser beam. Avoid pointing the laser at people or animals.
- General Safety: Keep the device out of reach of children. Do not attempt to disassemble or modify the device. Use only as intended.
- Battery Safety: Do not expose the battery to extreme temperatures or dispose of it in fire. Follow local regulations for battery disposal.
9. Warranty and Support
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official MiLESEEY website. Keep your proof of purchase for warranty claims.