Yaheetech 12ft Pre-lit Spruce Artificial Hinged Christmas Pine Tree Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Yaheetech 12ft Pre-lit Spruce Artificial Hinged Christmas Pine Tree. Please read these instructions carefully before assembly and retain for future reference.

This artificial Christmas tree features a hinged structure for easy setup, 1500 pre-installed warm white lights, and 4668 branch tips for a full appearance. The sturdy iron stand is foldable for convenient storage and includes non-skid rubber covers to protect your floors.

2. Safety Information

• Ensure the tree is placed on a flat, stable surface to prevent tipping.
• Keep the tree away from open flames, heat sources, and direct sunlight.
• Do not overload electrical outlets. Ensure all light connections are secure.
• This tree is designed for indoor use. If used outdoors, ensure it is in a covered area and protected from moisture.
• Keep small children and pets away from the tree during assembly and ensure all parts are securely fastened.
• Unplug the tree from the power source when not in use or before performing any maintenance.

3. Package Contents

Verify that all components are present before beginning assembly:

• Tree Sections (Multiple, depending on height)
• Foldable Metal Stand
• Pre-installed Warm White Lights
• Spare Light Bulbs (if included)

4. Setup Instructions

4.1 Assembling the Stand

1. Unfold the metal stand completely until it forms an 'X' shape.
2. Ensure the non-skid rubber covers are properly attached to the feet of the stand to prevent scratches on your floor.
3. Tighten the eye bolt on the stand to secure the base.

4.2 Assembling the Tree Sections

The tree is designed with a hinged structure for straightforward assembly. Each section is labeled (e.g., A, B, C from bottom to top).

1. Insert the bottom tree section (Section A) into the assembled stand. Ensure it is firmly seated and the eye bolt is tightened to hold it in place.
2. Continue by inserting the next section (Section B) into the top of Section A.
3. Repeat this process for all remaining sections, working your way up to the top section.

Figure 1: Simple Set-up. This image illustrates how the tree sections are stacked vertically to form the full tree. Each section fits into the one below it.

Figure 2: Hinged System. A detailed view of the hinged branches, which automatically fall into place when the tree sections are assembled.

4.3 Fluffing the Branches

After assembling all sections, the branches will need to be fluffed to achieve a full and natural appearance. This process involves shaping each individual branch tip.

1. Start from the bottom section of the tree and work your way up.
2. Gently pull each branch tip away from the main stem, spreading them out to fill any gaps.
3. For a 12ft tree, this process may take approximately 3 to 3.5 hours to achieve the desired fullness.

Figure 3: Branch Fluffing Guide. This diagram shows the four-step process for fluffing branches, transforming them from compressed to a full, natural shape. The 'Before' and 'After' images demonstrate the significant difference proper fluffing makes.

Figure 4: Fluffing Transformation. This image visually compares the tree before and after the fluffing process, highlighting the increased fullness and realistic appearance achieved by shaping the branches.

5. Operating Instructions

5.1 Connecting the Lights

Your tree comes with 1500 pre-installed warm white lights. Ensure all light connections between sections are securely plugged in. The electrical cords are designed to connect easily as you assemble the tree sections.

Figure 5: Key Features. This image highlights the clear warm lights, the easy set-up process with simple insertions, and the durable foldable metal stand designed for stability and storage.

5.2 Powering On

1. Once the tree is fully assembled and fluffed, and all light connections are secure, plug the main power cord into a standard electrical outlet.
2. The warm white lights will illuminate, providing a festive glow.

6. Maintenance

6.1 Cleaning

To clean your artificial Christmas tree, gently wipe the branches and lights with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the materials or lights.

6.2 Storage

Proper storage will help maintain the tree's condition for many seasons.

1. Unplug the tree from the power source.
2. Carefully disconnect the light connections between sections.
3. Disassemble the tree sections in reverse order of assembly (top to bottom).
4. Compress the branches of each section to their original compact form.
5. Fold the metal stand.
6. Store all components in their original packaging or a suitable storage bag in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Troubleshooting

8. Specifications

• Brand: Yaheetech
• Model: HWOA-100/2FR
• Height: 12 feet (144 inches)
• Base Diameter: 73 inches
• Material: PVC (branches/tips), Iron (trunk/stand)
• Item Weight: 106.92 Pounds
• Light Type: Pre-lit Warm White Lights
• Number of Lights: 1500
• Number of Branch Tips: 4668
• Special Features: Hinged structure, Foldable stand, Fire-resistant materials

Figure 6: Tree Dimensions. This image provides a visual representation of the tree's height (144 inches) and base diameter (73 inches).

9. Warranty & Support

For any questions, concerns, or support regarding your Yaheetech Christmas tree, please contact Yaheetech customer service. Please refer to your purchase documentation for specific warranty details, as these may vary.

You can typically find support information on the official Yaheetech website or through the retailer where the product was purchased.