1. Introduction
The SanzIa 1P 63A Ewelink WiFi Smart Circuit Breaker is an advanced electrical device designed for smart home integration. It combines the functionality of a miniature circuit breaker with smart control features, allowing for remote management, energy monitoring, and automated protection of electrical circuits via the Ewelink application.
2. Important Safety Information
- Electrical Hazard: Installation and maintenance must be performed by a qualified electrician or trained personnel. Ensure power is disconnected before any wiring or servicing.
- Voltage Compatibility: This device operates within AC100-280V. Verify your electrical system's voltage matches this range.
- Current Rating: Do not exceed the maximum current rating of 63 Amps. Overloading can cause damage or fire.
- Environmental Conditions: Do not install in environments with excessive moisture, dust, or extreme temperatures outside the specified working range (-25℃ to 70℃).
- Proper Grounding: Ensure proper grounding according to local electrical codes.
3. Product Features
The SanzIa 1P 63A Smart Circuit Breaker offers a range of intelligent functions:
- Remote Control: Turn the circuit breaker on or off from anywhere using the Ewelink app.
- Time Relay & Scheduling: Set schedules, timers, and loop timers for automated power management.
- Energy Monitoring: Real-time display of voltage, current, active power, and Kwh consumption via the app.
- Cost Calculation: Set power unit prices in the app to calculate household device power consumption. Data can be downloaded to a sheet.
- Advanced Protection: Configurable over-current, over-voltage, maximum power, and minimum power protection thresholds. The device automatically disconnects when thresholds are exceeded.
- Mechanical Life: Designed for over 100,000 switching operations.
4. Technical Specifications
| Specification | Value |
|---|---|
| Brand | SanzIa |
| Model | 1P 63A |
| Current Rating | 63 Amps |
| Number of Poles | 1 |
| Working Voltage | AC100-280V |
| Frequency | 50/60Hz |
| Circuit Breaker Type | Standard Miniature Circuit Breaker (MCB) |
| Working Temperature | -25℃ to 70℃ |
| Mechanical Life | Over 100,000 Times |
| Connectivity | WiFi (Ewelink App) |
| Item Weight | 0.035 ounces |
5. Installation Guide
Warning: Installation should only be performed by a qualified electrician. Ensure all power is disconnected at the main breaker before proceeding.
- Power Disconnection: Turn off the main power supply to the circuit where the smart breaker will be installed. Verify with a voltage tester.
- Mounting: Mount the SanzIa 1P 63A Smart Circuit Breaker onto a standard DIN rail within your electrical panel.
- Wiring Input: Connect the incoming live wire to the 'IN' terminal at the top of the device. Secure the connection firmly.
- Wiring Output: Connect the outgoing live wire (to the load) to the 'OUT' terminal at the bottom of the device. Secure the connection firmly.
- Neutral Wire Connection: Connect the neutral wire to the designated 'Connect N wire' terminal, typically a separate wire extending from the device.
- Verification: Double-check all wiring connections for tightness and correctness.
- Restore Power: Once all connections are secure and verified, restore power to the main circuit.
6. Initial Setup and App Pairing
To utilize the smart features, you need to pair the device with the Ewelink app:
- Download Ewelink App: Download and install the Ewelink app from your smartphone's app store (iOS or Android).
- Register/Login: Create an account or log in to your existing Ewelink account.
- Enter Pairing Mode: With the circuit breaker powered on, press and hold the blue control button on the front panel for approximately 5-7 seconds until the 'Signal' indicator light starts blinking rapidly. This indicates pairing mode.
- Add Device in App: Open the Ewelink app, tap the '+' icon to add a new device. Follow the on-screen instructions to discover and connect to the smart circuit breaker. You may need to select 'Quick Pairing' or 'Compatible Pairing' depending on the app version.
- Network Configuration: Select your 2.4GHz Wi-Fi network and enter the password when prompted.
- Device Renaming: Once successfully paired, you can rename the device for easy identification in the app.
7. Operating Instructions
After successful pairing, you can control and monitor your circuit breaker via the Ewelink app:
- Manual Control: Use the blue button on the device to manually turn it ON/OFF. The 'ON' and 'OFF' indicator lights will show the current status.
- Remote ON/OFF: In the Ewelink app, tap on the device to access its control interface. Use the toggle switch to turn the power ON or OFF remotely.
- Energy Monitoring: View real-time voltage, current, active power, and cumulative Kwh consumption within the device's interface in the Ewelink app.
- Scheduling: Set up one-time, recurring, or countdown timers for automatic power control.
- Protection Settings: Access the protection settings in the app to configure thresholds for over-current, over-voltage, max power, and min power. When these thresholds are met, the device will automatically trip to protect connected appliances.
- Data Export: The app allows for downloading energy consumption data for analysis.
8. Maintenance
- Cleaning: Keep the device clean and free from dust. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
- Connection Check: Periodically check the wiring connections to ensure they remain tight and secure.
- Firmware Updates: Check the Ewelink app for available firmware updates for the device to ensure optimal performance and security.
9. Troubleshooting
- Device Not Powering On: Ensure the main power supply is active and all wiring connections are correct and secure.
- Cannot Pair with App:
- Ensure your Wi-Fi network is 2.4GHz. 5GHz networks are not supported.
- Verify the device is in pairing mode (Signal light blinking rapidly). If not, press and hold the blue button to re-enter pairing mode.
- Check Wi-Fi signal strength at the installation location.
- Restart your router and try pairing again.
- Device Trips Frequently: Check the protection settings in the Ewelink app. The circuit may be experiencing over-current, over-voltage, or exceeding power thresholds. Reduce the load or adjust settings if appropriate.
- Remote Control Unresponsive: Check your internet connection and the device's Wi-Fi connection (Signal light should be solid).
10. Warranty and Support
Specific warranty information for the SanzIa 1P 63A Ewelink WiFi Smart Circuit Breaker may vary by region and retailer. Please refer to your purchase documentation or contact the seller directly for details regarding warranty coverage and technical support. For app-related issues, refer to the Ewelink app's help section or support resources.