Salicru SPS 2000 ONE BL UPS

1. Introduction

The Salicru SPS 2000 ONE BL is a line-interactive Uninterruptible Power Supply (UPS) designed to provide reliable power protection for your electronic devices. It offers battery backup during power outages and safeguards against power surges, ensuring the integrity of your data and the longevity of your equipment. This manual provides essential information for the proper installation, operation, and maintenance of your UPS unit.

2. Safety Information

Please read all safety instructions carefully before installing or operating the UPS. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not open the UPS casing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
• Do not install the UPS in direct sunlight, near heat sources, or in areas with excessive dust, humidity, or corrosive substances.
• Ensure the UPS is connected to a grounded power outlet.
• Do not connect appliances that could overload the UPS, such as laser printers or vacuum cleaners.
• In case of emergency, press the power button to turn off the UPS and disconnect the power cord from the AC power source.

3. Package Contents

Verify that all items are present in the package:

• Salicru SPS 2000 ONE BL UPS Unit
• User Manual (this document)
• USB Communication Cable
• Power Cord

4. Product Overview

4.1 Front Panel

Figure 4.1: Front view of the Salicru SPS ONE UPS.

The front panel features the main power button and LED indicators that display the operational status of the UPS. These indicators typically show power status, battery status, and fault warnings.

4.2 Rear Panel

Figure 4.2: Rear view of the Salicru SPS ONE UPS.

The rear panel provides the input power connection, four Schuko output sockets for connecting your devices, a USB communication port for PC connection, and a cooling fan for thermal management.

5. Setup

5.1 Placement

Place the UPS in a cool, dry, and well-ventilated indoor area. Ensure there is sufficient space around the unit for proper airflow, especially around the cooling fan on the rear panel. Avoid placing it near windows or in direct sunlight.

5.2 Connecting to Power

1. Connect the UPS power cord to a grounded wall outlet.
2. Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery performance.

5.3 Connecting Devices

1. Plug your computer, monitor, and other critical electronic devices into the Schuko output sockets on the rear panel of the UPS.
2. Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's capacity (2000VA / 1200W for this model).
3. For computer shutdown management, connect the supplied USB cable from the UPS's USB port to an available USB port on your computer.

6. Operating

6.1 Turning On/Off

• To Turn On: Press and hold the power button on the front panel for approximately 3 seconds until you hear a beep and the indicators light up.
• To Turn Off: Press and hold the power button for approximately 3 seconds until the indicators turn off.

6.2 Understanding Indicators

The LED indicators on the front panel provide real-time status of the UPS:

• Green LED (Power On): Indicates the UPS is operating normally and providing AC power to connected devices.
• Yellow LED (Battery Mode): Indicates the UPS is operating on battery power due to a power outage or fluctuation.
• Red LED (Fault/Warning): Indicates an error condition, such as overload or battery fault. Refer to the troubleshooting section.

6.3 Software Installation and Usage

The Salicru SPS ONE UPS includes a USB communication interface (HID protocol) that allows for monitoring and management via software. This software enables you to configure parameters, control the UPS, and set up automatic shutdown or hibernation for your computer during extended power outages.

Figure 6.3: UPS monitoring software interface and compatible operating systems.

The management and monitoring software is compatible with Windows, Linux, and Mac operating systems. Please refer to the software's dedicated user guide for detailed installation and operation instructions. The software can be downloaded from the official Salicru website or provided on an accompanying CD/USB drive.

7. Maintenance

7.1 Battery Care

The UPS contains a sealed lead-acid battery. To maximize battery life:

• Keep the UPS connected to AC power to ensure the battery remains charged.
• Avoid frequent deep discharges.
• Store the UPS in a cool, dry place if not in use for extended periods, and recharge the battery every 3-6 months.

7.2 Cleaning

Clean the exterior of the UPS with a soft, dry cloth. Do not use liquid or aerosol cleaners. Ensure the ventilation openings are free from dust and debris.

8. Troubleshooting

If you encounter issues with your UPS, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Salicru customer support.

9. Specifications

Technical specifications for the Salicru SPS 2000 ONE BL UPS:

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Salicru website. Keep your purchase receipt as proof of purchase for warranty claims.