Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Puluomis 28-inch Bathroom Vanity, Model USBA20070. This modern natural color wood fixture includes a pedestal bathroom cabinet and a square white ceramic vessel sink top. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Image: The Puluomis 28-inch Bathroom Vanity featuring a natural wood finish cabinet and a white ceramic vessel sink.
Setup and Installation
Package Contents
Your Puluomis Bathroom Vanity is shipped in two separate boxes. Please verify all components are present before beginning assembly.

Image: Diagram showing the contents of the two shipping packages.
- Package 1: Main cabinet, all hardware for cabinet assembly, installation manual.
- Package 2: Vessel sink, faucet, pop-up drain, all hardware for sink and faucet installation.
Dimensions
Ensure adequate space for installation. Key dimensions are provided below:

Image: Detailed diagram illustrating the dimensions of the Puluomis Bathroom Vanity.
- Vanity Cabinet: 28"W x 18.9"D x 31.5"H (including legs)
- Vessel Sink: 19.3"W x 15.2"D x 5.3"H
- Faucet Hole Diameter: Ø1.2"
- Drain Hole Diameter: Ø2.4"
Assembly Steps
Assembly is required for this product. Please refer to the included installation manual for detailed, step-by-step instructions specific to your vanity. General steps typically include:
- Unpack all components and verify against the parts list.
- Assemble the main cabinet structure using the provided hardware.
- Install the vessel sink onto the cabinet top, ensuring proper alignment with the drain and faucet holes.
- Install the faucet and pop-up drain according to their respective instructions.
- Connect plumbing lines (water supply and drain) to the faucet and drain assembly.
- Secure the vanity to the wall if necessary, using appropriate mounting hardware (not always included, check manual).
Unboxing and Sink Overview
The following video provides a visual guide to unboxing a vessel sink and highlights some of its features, which may be helpful for your installation.
Video: Unboxing and initial inspection of a vessel sink, demonstrating how it is packaged and removed from the box. This video is provided by the seller.
Operating Instructions
Vessel Sink Usage
The square white ceramic vessel sink is designed for countertop mounting. Operate the faucet by lifting the handle for water flow and adjusting left/right for temperature control. The included pop-up drain allows for easy opening and closing of the drain for filling or emptying the sink.

Image: The white ceramic vessel sink with a black faucet installed.
Cabinet Features
The vanity cabinet features two doors with zinc alloy handles and magnetic closures for secure storage. A lower drawer provides additional storage space. The internal shelf offers organized storage for bathroom essentials.

Image: Close-up view of the zinc alloy handles and magnetic door latches on the vanity cabinet.
Maintenance
Regular cleaning and proper care will ensure the longevity and appearance of your Puluomis Bathroom Vanity.
Ceramic Sink Care
The ceramic vessel sink features a thickened glazed surface, making it scratch-resistant and easy to clean. For daily cleaning, use a soft cloth with mild soap and water. Avoid abrasive cleaners, scouring pads, or harsh chemicals, as these can damage the glaze. Rinse thoroughly and wipe dry to prevent water spots.

Image: Visual representation of the ceramic basin's material and features.
Wood Cabinet Care
The natural color wood cabinet should be cleaned with a soft, damp cloth. Wipe spills immediately to prevent water damage or staining. Avoid using harsh chemical cleaners or polishes that are not specifically designed for wood furniture. Periodically check and tighten any loose hardware.
Cleaning Demonstration
This video demonstrates the ease of cleaning a vessel sink and highlights the functionality of the pop-up drain.
Video: Demonstration of cleaning a vessel sink and operating its pop-up drain. This video is provided by the seller.
Troubleshooting
If you encounter any issues with your Puluomis Bathroom Vanity, please refer to the following common troubleshooting tips:
- Leaking Faucet/Drain: Check all plumbing connections for tightness. Ensure all washers and seals are correctly seated. If leaks persist, consult a professional plumber.
- Slow Drainage: The pop-up drain may be partially closed or obstructed. Check for debris in the drain. If the issue continues, the P-trap may need cleaning.
- Cabinet Doors Not Closing Properly: Check if the magnetic latches are aligned. Adjust hinges if necessary to ensure proper door closure.
- Wobbling Vanity: Ensure the vanity is placed on a level surface. Adjust any leveling feet if present, or use shims if needed. Secure the vanity to the wall for added stability.
For issues not covered here, please contact Puluomis customer support.
Specifications
Detailed specifications for the Puluomis 28-inch Bathroom Vanity (Model USBA20070):
| Feature | Detail |
|---|---|
| Brand | Puluomis |
| Model Number | USBA20070 |
| Color | Vanity With White Ceramic Sink (Natural Wood Finish) |
| Material (Cabinet) | MDF wood, Engineered Wood |
| Material (Sink) | 4-layered glaze spraying ceramic |
| Product Dimensions | 15.2"D x 19"W x 5.3"H (Sink) | 28"W x 18.9"D x 31.5"H (Vanity) |
| Mounting Type | Floor Mount |
| Special Feature | Scratch Resistant (Sink) |
| Weight Limit | 220 Pounds |
| Included Components | Shelves, Faucet, Pop-up Drain |
| Number of Shelves | 1 |
| Handle Material | Zinc Alloy |
Warranty and Support
For specific warranty information regarding your Puluomis Bathroom Vanity, please refer to the documentation included with your purchase or contact Puluomis customer support directly. If you require assistance with assembly, parts, or troubleshooting beyond this manual, please reach out to the manufacturer's customer service department.