Introduction
This manual provides comprehensive instructions for the assembly, usage, and maintenance of your Modway Fortitude Modern Coffee Table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Image: The Modway Fortitude Modern Coffee Table in Oak, showcasing its oval shape, slatted sides, and black metal legs.
Safety Information
- Always assemble the product on a soft, clean surface to prevent scratches.
- Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
- Do not exceed the maximum recommended load capacity of 74 pounds.
- Keep small parts away from children during assembly to avoid choking hazards.
- Avoid placing hot items directly on the surface without protective coasters.
- Do not stand or sit on the coffee table.
Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tabletop (Oval, Oak finish)
- Lower Shelf (Oval, Oak finish)
- Slatted Side Panels (Pre-assembled with tabletop/shelf)
- Metal Legs (4 pieces, Black)
- Hardware Pack (Screws, washers, Allen wrench)
- Assembly Guide (This document)

Image: Diagram illustrating the key features of the coffee table, including open storage, metal legs with non-marking foot caps, and MDF and particleboard construction.
Setup and Assembly
Assembly is required for this coffee table. It is recommended to have two people for easier assembly, though it can be completed by one person. A screwdriver may be needed in addition to the included Allen wrench.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage.
- Attach Legs to Base: Identify the four metal legs. Align each leg with the pre-drilled holes on the underside of the coffee table's base frame. Secure them using the provided screws and Allen wrench. Ensure they are tightened firmly but do not overtighten.
- Verify Stability: Once all legs are attached, gently lift and place the coffee table upright. Check for stability and ensure all connections are secure. The non-marking foot caps on the legs protect your flooring.

Image: A visual representation of the coffee table's dimensions: 43.5 inches (W) x 18.5 inches (D) x 17 inches (H).
Operating and Usage
The Modway Fortitude Coffee Table is designed for use in living spaces to hold beverages, reading materials, and decorative items. Its open design provides convenient storage and display options.
- Place the coffee table on a level surface to ensure stability.
- Utilize the top surface for frequently accessed items like remote controls, drinks (with coasters), or small decor.
- The lower shelf is ideal for magazines, books, or other items you wish to keep organized and accessible.
- Distribute weight evenly across the surfaces and do not exceed the maximum load capacity of 74 pounds.
Maintenance
Proper care will help maintain the appearance and longevity of your coffee table.
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the wood finish.
- Spills: Blot spills immediately with a clean, dry cloth to prevent staining or water damage.
- Protection: Use coasters under drinks and placemats under hot dishes or decorative items to protect the surface from heat and moisture rings.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration of the wood finish.
- Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Table is wobbly | Loose fasteners; uneven floor. | Check and tighten all screws and bolts. Ensure the table is on a level surface. Adjust foot caps if possible, or use shims. |
| Scratches on surface | Sharp objects; abrasive cleaning. | Use coasters and avoid dragging items. For minor scratches, wood repair kits may be used (test in an inconspicuous area first). |
| Discoloration or fading | Prolonged exposure to direct sunlight. | Relocate the table away from direct sunlight or use window coverings. |
Specifications
- Model: EEI-6525-OAK
- Brand: Modway
- Material: MDF, Particleboard, Metal
- Color: Oak
- Product Dimensions (L x W x H): 43.5" x 18.5" x 17" (110.5 cm x 47 cm x 43.2 cm)
- Item Weight: 37 pounds (16.8 kg)
- Maximum Recommended Load: 74 pounds (33.5 kg)
- Special Feature: Easy Assembly, Non-marking foot caps
Warranty and Support
For warranty information and customer support, please refer to the product description on the retailer's website or visit the official Modway store page.
Modway Official Store: Visit Modway Store on Amazon
If you encounter any issues or have questions not covered in this manual, please contact Modway customer service through their official channels.





