Introduction
Welcome to your new PHI VILLA 8-Piece Patio Furniture Set. This comprehensive manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your outdoor furniture set. Designed for comfort and durability, this set includes a 3-seat bench sofa, two swivel cushioned sofa chairs, two single padded cushion leg sofa chairs, a 45-inch fire pit table, and two metal cushioned ottomans.

Image: The complete PHI VILLA 8-piece patio furniture set, featuring a sofa, chairs, ottomans, and a fire pit table, arranged on an outdoor patio.
Components List
Please verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 1 x 3-Seat Bench Sofa
- 2 x Swivel Cushioned Sofa Chairs
- 2 x Single Padded Cushion Leg Sofa Chairs
- 1 x 45-inch Fire Pit Table (50000 BTU output)
- 2 x Metal Cushioned Ottomans
- Cushions for all seating pieces
- Assembly Hardware (bolts, washers, tools)

Image: An overview of the individual furniture pieces included in the set, such as the sofa, chairs, ottomans, and fire pit table.
Assembly Instructions
Assembly is required for this patio furniture set. It is recommended to have two people for assembly to ensure ease and safety. Please follow these general guidelines:
General Assembly Tips:
- Lay out all parts on a soft, clean surface to prevent scratches.
- Do not fully tighten bolts until all components are loosely assembled. This allows for easier alignment.
- Refer to the included diagrams in your product packaging for specific part identification and step-by-step instructions.
Sofa and Chair Assembly:
- Attach the backrest to the seat frame using the provided hardware.
- Secure the armrests to the assembled backrest and seat frame.
- For swivel chairs, ensure the swivel mechanism is correctly aligned and secured to the chair base.
- Once all parts are in place, gradually tighten all bolts evenly.
- Place cushions on the assembled frames.

Image: A detailed view of the metal frame construction for a PHI VILLA patio chair.

Image: A detailed view of the metal frame construction for a PHI VILLA patio sofa.

Image: A PHI VILLA swivel sofa chair with its beige cushions, showcasing the 360-degree swivel function.
Fire Pit Table Assembly:
- Assemble the fire pit table base according to the diagrams provided in your product manual.
- Carefully place the burner assembly into the table frame.
- Connect the gas line to the burner and ensure all connections are secure.
- Place the fire glass into the burner pan.
- Ensure the propane tank (not included) is properly connected and secured in its compartment.

Image: The PHI VILLA 45-inch rectangular fire pit table with a vibrant flame, highlighting its design and functionality.
Operating Instructions for the Fire Pit Table
Always read and understand all safety warnings and instructions before operating the fire pit table.
Before First Use:
- Ensure the fire pit is placed on a level, non-combustible surface, away from any flammable materials.
- Connect a standard 20 lb propane tank (not included) to the gas hose. Ensure the tank is upright and secured in its designated compartment.
- Check all gas connections for leaks using a soapy water solution. Bubbles indicate a leak; do not operate if a leak is detected.
Lighting the Fire Pit:
- Ensure the control knob is in the "OFF" position.
- Slowly open the valve on the propane tank.
- Push and turn the control knob to the "LOW" position.
- Press and hold the electric igniter button until the burner ignites. You may need to hold the button for several seconds.
- Once lit, continue to hold the control knob for 15-20 seconds to allow the thermocouple to heat up.
- Release the control knob. If the flame extinguishes, repeat steps 3-5.
- Adjust the flame height to your desired level using the control knob.
Shutting Down the Fire Pit:
- Turn the control knob to the "OFF" position.
- Close the valve on the propane tank.
- Allow the fire pit to cool completely before covering or moving.
Video: An official PHI VILLA video demonstrating the features and use of the patio furniture set with the fire pit table.
Video: An official PHI VILLA video showcasing the patio furniture set, including a closer look at the fire pit table.
Maintenance
Proper care and maintenance will extend the life and appearance of your PHI VILLA patio furniture set.
General Frame Care:
- Wipe metal frames with a dry cloth to remove dust and debris.
- For deeper cleaning, use a mild soap and water solution, then rinse thoroughly and dry completely to prevent water spots.
- Regularly inspect all bolts and connections and tighten as needed to maintain structural integrity.
- The e-coating metal frame is designed to be rust-proof and heavy-duty.

Image: A close-up view of the upgraded metal frame, highlighting its durable construction and finish.
Cushion Care:
The cushions are made with 230g Olefin cushion-pro fabric, offering excellent water, oil, and stain resistance.
- For spills, gently pat wipe with a dry towel to absorb the liquid.
- For stubborn stains, use a mild soap and water solution and a soft brush, then rinse and air dry thoroughly.
- Store cushions indoors or cover them during prolonged periods of non-use or inclement weather to extend their lifespan and maintain their appearance.

Image: A close-up of the cushion fabric, illustrating its water-repellent and stain-resistant properties.
Video: An official PHI VILLA video highlighting the features of the Cushion-pro Fabric used in the patio furniture set.
Troubleshooting
This section addresses common issues you might encounter with your patio furniture set.
Fire Pit Not Lighting:
- Propane Tank: Ensure the propane tank valve is fully open and the tank contains sufficient fuel.
- Gas Connections: Check that the gas hose is securely connected to both the tank and the fire pit. Perform a leak test with soapy water.
- Igniter Battery: Verify that the igniter battery (if applicable) is functional and correctly installed. Replace if necessary.
- Burner Ports: Clear any debris or obstructions from the burner ports.
- Thermocouple: If the flame goes out shortly after releasing the control knob, ensure you held the knob long enough (15-20 seconds) for the thermocouple to heat up and signal the gas valve to stay open.
Loose Components:
- Periodically check and tighten all bolts and fasteners on the furniture frames to ensure stability and safety.
Cushion Stains:
- Refer to the "Cushion Care" section under Maintenance for detailed cleaning instructions for water, oil, and stain-resistant fabric.
Specifications
| Feature | Detail |
|---|---|
| Brand | PHI VILLA |
| Model Number | B0CG9H61LQ |
| Set Pieces | 8 PCS |
| Color | Beige |
| Material Type | Metal |
| Fire Pit BTU Output | 50000 BTU |
| Fire Pit Dimensions | 45 inches (L) x 25 inches (W) |
| Sofa Seating Capacity | 3 Person |
| Single Sofa Weight Capacity | 350 lbs |
| 3-Seater Bench Weight Capacity | 900 lbs |
| Item Depth (Seating) | 24 inches |
| Assembly Required | Yes |
| Product Care | Wipe with Dry Cloth |
Warranty and Support
For detailed warranty information, including coverage periods and terms, please refer to the specific warranty documentation included with your PHI VILLA 8-Piece Patio Furniture Set. In case of any issues, missing parts, or for customer support, please contact PHI VILLA directly through their official website or the contact information provided in your product packaging. Protection plans may be available for purchase separately to extend coverage beyond the manufacturer's warranty.







