BUVAYE BN03 Portable Car Jump Starter with Air Compressor and LED Light User Manual

Introduction

The BUVAYE BN03 is a multi-functional device designed for automotive emergencies. It combines a powerful car jump starter, a tire inflator, a portable power bank, and an LED flashlight. This manual provides detailed instructions for safe and effective use of the device.

Product Features

• High-Performance Jump Starter: Delivers 2500A peak current, capable of starting vehicles with up to 5L diesel or 8L gas engines.
• Smart Clamp Protection: Features 10 integrated safety protections including anti-spark, reverse polarity, overcurrent, short-circuit, overcharge, over-discharge, high-temperature, low-temperature, reverse connection, and overload protection.
• Fast Tire Inflator: Equipped with a 22-cylinder turbo motor, providing an airflow of 35 liters per minute. Supports real-time tire pressure detection, automatic shut-off at preset values, and unit switching. Can inflate 195/65/R15 tires from 0 to 35 PSI in approximately 5 minutes.
• Memory Function: Retains the last set inflation mode and air pressure value for convenience.
• Portable Power Bank: Functions as a mobile power source for charging electronic devices.
• LED Flashlight: Integrated LED light for emergency illumination.

Package Contents

Please check the package for the following items:

• BUVAYE BN03 Jump Starter with Air Compressor x1
• Smart Jump Starter Clamps x1
• Inflatable Hose x1
• Nozzle Adapters x4
• USB-C Charging Cable x1
• Accessory Storage Bag x1
• User Manual x1

Safety Instructions

Read all safety warnings and instructions before using this product. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

• Do not jump-start a frozen battery.
• Ensure proper polarity connection (red clamp to positive, black clamp to negative).
• Do not connect the positive and negative clamps together.
• Keep the device away from children.
• Do not expose the device to rain or wet conditions.
• Do not disassemble the device. Refer all servicing to qualified personnel.
• Use only the provided charging cable and accessories.
• Avoid prolonged inflation to prevent overheating. Allow 10 minutes of cooling time after each inflation cycle.

Component Overview

Image: Diagram showing the components and features of the BUVAYE BN03 device.

This image illustrates the various parts of the BUVAYE BN03, including the power switch, air pressure controls, pressure unit adjustment, smart clip socket, inflator hose socket, USB-A output, USB-C input port, LED flashlight switch, positive clamp (red), negative clamp (black), and jump start port.

• Power Switch: Turns the device on/off.
• Air Pressure +/-: Adjusts the target air pressure for inflation.
• Pressure Unit Adjustment: Cycles through pressure units (PSI, KPA, BAR, KG/CM²).
• Smart Clip Socket: Port for connecting the smart jump starter clamps.
• Inflator Hose Socket: Port for connecting the air inflator hose.
• USB-A Output: For charging external devices.
• USB-C Input Port: For charging the BUVAYE BN03 device.
• LED Flashlight Switch: Activates the LED light.
• Positive Clamp (Red): Connects to the positive terminal of the car battery.
• Negative Clamp (Black): Connects to the negative terminal of the car battery.
• Jump Start Port: Connects the smart clamps to the main unit.

Setup and Charging

Charging the Device

Before first use, fully charge the BUVAYE BN03. Connect the provided USB-C charging cable to the USB-C input port on the device and to a suitable USB power adapter (not included). The display will indicate the charging status. A full charge is recommended for optimal performance.

Initial Inspection

Inspect the device and all accessories for any damage before use. Do not use if any components are damaged.

Operating Instructions

1. Jump Starting a Vehicle

Image: A person connecting the jump starter clamps to a car battery.

This image demonstrates the process of connecting the BUVAYE BN03 jump starter to a vehicle's battery terminals, showing the red clamp on the positive terminal and the black clamp on the negative terminal.

1. Ensure the BUVAYE BN03 is sufficiently charged.
2. Turn off the vehicle's ignition and all accessories.
3. Connect the smart jump starter clamps to the jump start port on the BUVAYE BN03.
4. Connect the red (positive) clamp to the positive (+) terminal of the vehicle's battery.
5. Connect the black (negative) clamp to the negative (-) terminal of the vehicle's battery.
6. Ensure the clamps are securely attached and the indicator light on the smart clamp is green. If it's red or flashing, check connections and battery status.
7. Start the vehicle's engine.
8. Once the engine starts, immediately remove the smart clamps from the vehicle battery, first the negative (black) clamp, then the positive (red) clamp.
9. Disconnect the smart clamps from the BUVAYE BN03.

Note: If the vehicle does not start after 3 attempts, allow the jump starter to cool down for a few minutes before trying again. Consult your vehicle's manual for specific jump-starting procedures.

2. Inflating Tires

Image: The BUVAYE BN03 connected to a car tire for inflation.

This image shows the BUVAYE BN03 device with its inflator hose connected to a car tire valve, demonstrating the tire inflation function.

1. Connect the inflator hose to the inflator hose socket on the BUVAYE BN03.
2. Attach the other end of the inflator hose to the tire valve. Ensure a secure connection to prevent air leakage.
3. Turn on the BUVAYE BN03. The display will show the current tire pressure.
4. Use the "Air Pressure +/-" buttons to set the desired target pressure. Press the "Pressure Unit Adjustment" button to cycle through units (PSI, KPA, BAR, KG/CM²).
5. Press the start button (often the power button or a dedicated inflation button) to begin inflation.
6. The device will automatically stop when the preset pressure is reached.
7. Disconnect the inflator hose from the tire valve and then from the BUVAYE BN03.

Memory Function: After powering on, press "+" or "-" to recall the last set inflation mode and pressure value.

Note: For continuous inflation, allow the device to cool down for 10 minutes after each inflation cycle to prevent overheating.

3. Using as a Power Bank

Image: The BUVAYE BN03 connected to a smartphone for charging.

This image shows the BUVAYE BN03 being used as a portable power bank, with a USB cable connecting it to a smartphone that is actively charging.

Connect your electronic device's USB charging cable to the USB-A output port on the BUVAYE BN03. The device will automatically begin charging your connected device.

4. Using the LED Flashlight

Press the LED Flashlight Switch to cycle through different light modes: steady on, strobe, and SOS. Press again to turn off the light.

Maintenance

• Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Charging: Recharge the device every 3-6 months, even if not in use, to maintain battery health.
• Battery Disposal: Dispose of the lithium-ion battery according to local regulations. Do not dispose of in household waste.

Troubleshooting

Specifications

Image: Visual representation of the jump starter's capacity for gas and diesel engines.

This image highlights the BUVAYE BN03's capability to jump start vehicles with up to 8.5L gas engines and 6L diesel engines, with a peak current of 2500A.

Image: Icons illustrating the 10 safety protection features.

This image displays the comprehensive 10 protection features of the BUVAYE BN03, including reverse polarity, over current, over voltage, over charge, over-discharge, high-temp, low-temp, reverse connection, overload, and short circuit protection.

Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BUVAYE website. Keep your purchase receipt as proof of purchase.