1. Product Overview
The STARTRC Hard Case is a custom-designed, durable storage and transport solution specifically engineered for the DJI Air 3 Fly More Combo, including the RC 2/RC-N2 controller and various drone accessories. This case provides comprehensive protection for your valuable equipment, ensuring safety during travel and storage.
Key Features:
- Custom Design: Tailored to fit the DJI Air 3 drone, RC 2/RC-N2 controller, and other essential accessories.
- Large Capacity: Accommodates 1x Air 3 drone (with Gimbal Protector), 1x RC 2/RC-N2 Controller, up to 5 batteries (one on drone), 1x Battery Charging Hub, 1x Charger, Filters Set, Propellers, RC Cable, and more.
- Full Protection: Constructed from safe and sturdy materials, offering superior impact protection, anti-fall, compression, and abrasion resistance. Features sealing rubber strips and high-density locks for tight sealing, suitable for outdoor use in rain.
- Convenient and Portable: Includes a customized shoulder strap and a portable soft grip handle for easy and secure transport, ideal for flying activities, travel, or home storage.
2. Setup and Storage
This section details the proper placement of your DJI Air 3 drone and its accessories within the STARTRC Hard Case to ensure maximum protection and organization.
Image 1: The STARTRC Hard Case with its custom-cut foam interior, designed to securely hold the DJI Air 3 drone, its remote controller, and multiple batteries. The foam provides a snug fit for each component, preventing movement and potential damage during transport.
2.1 Component Placement Guide
The case features precision-cut foam inserts to perfectly cradle each item. Refer to the diagram below for optimal arrangement:
- DJI Air 3 Drone: Place the drone in the largest designated cutout, ensuring the gimbal protector is attached.
- Remote Controller (RC 2/RC-N2): Position the controller in its dedicated slot.
- Intelligent Flight Batteries: Insert up to four additional batteries into the individual battery slots. One battery can remain on the drone.
- Battery Charging Hub: Place the charging hub in its specific compartment.
- Charger and Cables: Utilize the remaining cutouts for the charger and necessary cables.
- Filters Set & Propellers: Small dedicated spaces are available for these accessories.
Image 2: A visual guide illustrating two possible configurations for storing your DJI Air 3 drone and its accessories within the hard case. This diagram highlights the flexible storage options for different remote controller types (RC 2/RC-N2) and the placement of batteries, charging hubs, and other small items like ND filters and cables.
Ensure all items are seated firmly within their respective cutouts before closing the case. This prevents shifting and provides optimal protection.
3. Operating the Case
The STARTRC Hard Case is designed for secure and convenient transport. Follow these steps for proper operation.
3.1 Securing the Case
After placing all items, close the lid firmly. Engage the high-density locks on the front of the case. Ensure both latches click securely into place to maintain the waterproof and protective seal.
3.2 Using the Shoulder Strap
For enhanced portability, attach the included shoulder strap to the designated attachment points on the case. The strap allows for comfortable hands-free carrying, ideal for longer distances or when you need your hands free for other gear.
Image 3: A user demonstrating the portability of the STARTRC Hard Case, comfortably carrying it with the attached shoulder strap. This feature makes the case easy to transport to various flying locations.
3.3 Visual Guide: Packing and Carrying
Video 1: This video demonstrates the process of organizing and securing the DJI Air 3 drone and its accessories within the STARTRC hard case. It shows how to properly place each component, close the latches, attach the shoulder strap, and carry the case, highlighting its ease of use and portability.
4. Maintenance and Care
Proper maintenance ensures the longevity and continued protective capabilities of your STARTRC Hard Case.
4.1 Cleaning Instructions
To clean the exterior of the case, wipe it with a damp cloth and mild soap if necessary. Avoid abrasive cleaners or solvents that could damage the material. For the interior foam, gently vacuum or use a soft brush to remove dust and debris.
4.2 Ensuring Waterproof Integrity
The case is designed to be waterproof. To maintain this feature, regularly inspect the rubber sealing strips around the edges of the lid for any signs of wear, cracks, or debris. Ensure the latches are clean and operate smoothly for a tight seal.
Image 4: The STARTRC Hard Case covered in water droplets, illustrating its effective waterproof design. This feature protects your drone and accessories from moisture in various outdoor conditions.
Image 5: The STARTRC Hard Case positioned on wet terrain, with its interior contents visible. This image emphasizes the case's robust construction and its ability to protect sensitive equipment even when exposed to damp environments.
4.3 Durability and Impact Resistance
The case is constructed from high-strength PP with upgraded EVA multi-layer protection, designed to be incredibly impact resistant. This robust construction ensures your equipment is safe even under significant external pressure.
Image 6: The STARTRC Hard Case demonstrating its exceptional durability and pressure resistance, with a car tire resting on its surface. This visual highlights the case's ability to protect its contents from heavy external forces.
4.4 Visual Guide: Durability and Waterproofing
Video 2: This video showcases the robust and waterproof features of the STARTRC hard case. It demonstrates the case's ability to withstand impacts and exposure to water, ensuring the safety of your DJI Air 3 drone and accessories in challenging conditions.
5. Troubleshooting
While the STARTRC Hard Case is designed for reliability, here are some common issues and their solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Case does not close securely. |
|
|
| Water inside the case after exposure. |
|
|
6. Product Specifications
Detailed specifications for the STARTRC Hard Case (Model: M).
Image 7: A comprehensive overview of the STARTRC Hard Case's specifications, including its product name, dimensions (14.9 x 12.2 x 5.7 inches), weight (4.1 lbs), main materials (PP+EVA), and applicable models (DJI Air 3). It also highlights key features like full protection, moisture-proof, waterproof design, high-density foam, pressure resistance, and unique craft.
| Attribute | Detail |
|---|---|
| Product Name | AIR 3 Waterproof Case |
| Product Size | 380x310x145 mm (14.9x12.2x5.7 inch) |
| Product Weight | 1.9kg (4.1lb) |
| Applicable Models | DJI Air 3 |
| Main Material | PP+EVA |
| Product Color | Black+Red |
| Manufacturer | STARTRC |
| First Available Date | August 22, 2023 |
7. Warranty and Support
STARTRC is committed to providing high-quality products and excellent customer service.
7.1 Warranty Information
This product comes with a 24-month warranty from the date of purchase, covering manufacturing defects and material flaws under normal use.
7.2 Customer Support
For any inquiries, technical assistance, or warranty claims, please contact STARTRC customer service. We offer 24-hour after-sales service to address your needs promptly.
Please refer to the contact information provided on the product packaging or the official STARTRC website for the most up-to-date support channels.
