Introduction
This manual provides detailed instructions for the OutdoorMaster OM BT01 Wireless Bluetooth 5.0 Helmet Headphones. These headphones are designed for seamless integration into audio-ready ski, snowboard, and motorcycle helmets, offering high-definition audio and convenient controls for an enhanced experience.
The OM BT01 features Bluetooth 5.0 for stable connectivity, 40mm drivers for clear sound, a built-in microphone for calls, and IP45 sweat-resistance for durability in various conditions.
Safety Information
- Volume Levels: Avoid listening at excessively high volume levels for prolonged periods to prevent hearing damage.
- Environmental Conditions: The headphones are tested to work perfectly at temperatures down to -20°C (-4°F) and are IP45 sweat-resistant. However, extreme conditions outside this range may affect performance.
- Ear Comfort: If you experience ear pain due to pressure after extended wear, remove the helmet headphones and take a break for 10 minutes before reinserting them.
- Awareness: Using headphones can reduce your awareness of surrounding sounds. Exercise caution in environments where hearing external sounds is critical for safety.
Package Contents
Verify that all items are present in your package:
- OutdoorMaster OM BT01 Helmet Headphones
- USB-C Charging Cable
- Carrying Case
Image: The OutdoorMaster OM BT01 Helmet Headphones shown with their included carrying case.
Setup
1. Charging the Headphones
Before first use, fully charge the headphones. Connect the provided USB-C charging cable to the Type-C port on the headphones and to a compatible USB power source. The charging indicator light will provide status.
Image: A close-up view of the headphone speaker and the Type-C charging port located on the side.
2. Installing into Your Helmet
The OM BT01 headphones are designed to be compatible with most audio-ready ski, snowboard, and motorcycle helmets. Locate the audio pockets within your helmet's ear pads. Gently slide each headphone unit into the designated pocket. Ensure the control buttons are accessible and oriented correctly for ease of use.
Image: A hand demonstrating the insertion of an OM BT01 headphone unit into the ear pad of a helmet.
3. Bluetooth Pairing
- Power On: Press and hold the Power button on the headphones until the indicator light flashes, indicating pairing mode.
- Activate Bluetooth: On your mobile device, navigate to the Bluetooth settings and ensure Bluetooth is enabled.
- Select Device: Look for 'OM BT01' in the list of available devices and select it to connect.
- Confirmation: Once successfully paired, the headphones will provide an audio confirmation, and the indicator light will change.
Operating Instructions
1. Power On/Off
- Power On: Press and hold the central Power button for approximately 3 seconds.
- Power Off: Press and hold the central Power button for approximately 5 seconds.
2. Music Playback
The large, glove-friendly buttons allow for easy control:
- Play/Pause: Press the central Power button once.
- Volume Up: Press the '+' button.
- Volume Down: Press the '-' button.
- Next Track: Press and hold the '+' button.
- Previous Track: Press and hold the '-' button.
3. Call Management
The built-in microphone enables hands-free communication:
- Answer/End Call: Press the central Power button once.
- Reject Call: Press and hold the central Power button for 2 seconds.
- Activate Voice Assistant (Siri/Google Assistant): Double-press the central Power button.
4. Unique Power Saving Mode
To conserve battery, the headphones feature an automatic power-saving mode:
- If music playback is paused for 5 minutes, the power-saving mode will activate, and the headphones will power off.
- To resume use, simply press and hold the Power button to turn the headphones back on.
Image: A visual guide explaining the automatic power-saving feature and how to reactivate the headphones.
Maintenance
- Cleaning: Wipe the headphones with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials. Ensure the charging port is free of debris.
- Storage: When not in use, store the headphones in their provided carrying case to protect them from dust and physical damage. Store in a cool, dry place.
- Cable Care: The cable is designed to be flexible. Avoid sharp bends or excessive pulling to prevent damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headphones do not power on. | Low battery. | Charge the headphones fully. |
| Cannot pair with Bluetooth device. | Headphones not in pairing mode; Bluetooth off on device; device too far. | Ensure headphones are in pairing mode. Turn Bluetooth on your device. Move device closer to headphones. Forget device and re-pair. |
| No sound or low volume. | Volume too low on headphones or device; improper connection. | Increase volume on both headphones and connected device. Reconnect Bluetooth. |
| Headphones turn off automatically. | Power saving mode activated. | This is normal behavior after 5 minutes of inactivity. Press and hold the Power button to turn them back on. |
| Ear discomfort after prolonged use. | Pressure from helmet. | Remove headphones and take a 10-minute break. Adjust helmet fit if necessary. |
Specifications
- Model Name: OM BT01
- Connectivity Technology: Wireless (Bluetooth 5.0)
- Audio Driver Type: Dynamic Driver
- Frequency Range: 20 Hz - 20,000 Hz
- Impedance: 28 Ohm
- Battery Life: Up to 15 Hours Playtime
- Water Resistance Level: IP45 Sweat-Resistance
- Built-in Microphone: Yes
- Control Type: Integrated Buttons, Voice Control
- Compatible Devices: Ski Helmets, Snowboard Helmets, Motorcycle Helmets
- Item Weight: 5.3 ounces
- Operating Temperature: Tested to work perfectly at -20°C (-4°F)
Warranty and Support
OutdoorMaster offers a one-year product quality warranty for the OM BT01 Helmet Headphones. If you encounter any issues or have questions regarding your product, please contact OutdoorMaster customer support. We are committed to resolving your problem within 24 hours.
For support, please visit the official OutdoorMaster website or refer to the contact information provided with your purchase documentation.
