1. Introduction
This manual provides essential information for the safe and efficient use of your new Faber HOB PRIME HT704 4 Burner 70cm Hob. Please read these instructions carefully before installation and operation, and retain them for future reference. Proper installation, operation, and maintenance are crucial for optimal performance and safety.
2. Safety Information
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause injury or property damage. Refer to this manual. For assistance or additional information, consult a qualified installer, service agency, or the gas supplier.
- Ensure adequate ventilation in the kitchen area when the hob is in use.
- Do not store flammable materials near the appliance.
- Keep children away from the hob during operation and cooling.
- In case of a gas leak, immediately turn off the gas supply, open windows, and do not operate any electrical switches or appliances. Contact your gas supplier or a qualified technician.
- Use only stable cookware appropriate for the burner size.
- Never leave cooking unattended.
3. Product Overview
The Faber HOB PRIME HT704 is a 70cm 4-burner hob designed for modern kitchens, offering both hobtop and cooktop functionality. It features a durable black glass finish, auto-ignition, and robust components for reliable cooking.
Figure 3.1: Front view of the Faber HOB PRIME HT704 4 Burner Hob.
Key Features:
- Toughened Black Glass: 8mm thick, durable, and easy to clean.
- Burners: 4 burners, including 2 x 2.5 Kw and 2 x 1.5 Kw for versatile cooking.
- Ignition: In-built Auto Electric, DC1.5 V operated for convenient lighting.
- Pan Support: Cast Iron pan supports provide stability for cookware.
- Knobs: Premium Metal Knobs for precise flame control and durability.
- Burner Caps: Brass finish burner caps, easy to maintain.
- Hybrid Design: Can be used as a hobtop or a traditional cooktop.
Figure 3.2: Detailed view of key features: Cast Iron Pan Support, In-built Auto Electric Ignition, Premium Metal Knobs, and Multi Flame Burner.
4. Setup & Installation
The Faber HOB PRIME HT704 is designed for flexible installation as either a built-in hob or a freestanding cooktop. Professional installation by a qualified technician is highly recommended to ensure safety and proper functioning.
Dimensions for Built-in Installation:
Refer to the diagram below for the precise dimensions required for built-in installation. Ensure sufficient clearance around the appliance for ventilation and maintenance.
Figure 4.1: Product dimensions for installation: 700mm (width) x 525mm (depth) x 130mm (height).
Gas Connection:
The appliance must be connected to the gas supply by a qualified and registered gas fitter. Ensure the gas type matches the appliance specifications. Check for leaks using soapy water after connection.
Electrical Connection:
The auto-ignition system requires a DC1.5 V power supply. Ensure the electrical connection is made according to local regulations and safety standards.
5. Operating Instructions
Igniting a Burner:
- Place your cookware on the cast iron pan support over the desired burner.
- Push down and turn the corresponding metal knob counter-clockwise to the 'Ignite' position.
- The auto-ignition will spark, lighting the burner. Hold the knob down for a few seconds to allow the flame supervision device to activate.
- Once lit, adjust the flame to your desired intensity by turning the knob between the 'High' and 'Low' settings.
- To turn off, turn the knob clockwise to the 'Off' position.
Video 5.1: This video demonstrates the auto-ignition feature and the use of metal knobs for flame control on the Faber HOB PRIME HT704. It also highlights the cast iron pan supports and brass burner caps.
Burner Usage:
- Use the 2.5 Kw burners for faster cooking and larger pots.
- The 1.5 Kw burners are suitable for simmering, smaller pots, or gentle heating.
- Always match the flame size to the base of your cookware to prevent energy waste and potential damage to handles.
6. Cleaning & Maintenance
Regular cleaning and maintenance will prolong the life of your hob and ensure its continued safe operation.
Cleaning the Glass Surface:
- Allow the hob to cool completely before cleaning.
- Use a soft cloth and a non-abrasive cleaner specifically designed for glass cooktops.
- Wipe spills immediately to prevent staining, especially sugary or acidic foods.
- Avoid using harsh chemicals, abrasive pads, or sharp objects that could scratch the glass.
Figure 6.1: The 8mm toughened black glass surface is designed for easy cleaning.
Cleaning Burner Components:
- Remove the cast iron pan supports and brass burner caps when cool.
- Wash these components with warm soapy water. For stubborn stains, a non-abrasive scrub brush can be used.
- Ensure all components are thoroughly dry before reassembling them. Moisture can affect ignition.
- Periodically check the burner ports for blockages and clean them with a fine wire or needle if necessary.
Figure 6.2: Brass burners are durable and easy to maintain.
7. Troubleshooting
Before contacting service, check the following common issues:
| Problem | Possible Cause | Solution |
|---|---|---|
| Burner does not ignite. | No gas supply, power outage (for auto-ignition), wet burner components, clogged burner ports. | Check gas supply, ensure power to the hob, dry components, clean burner ports. |
| Uneven or yellow flame. | Clogged burner ports, incorrect gas pressure. | Clean burner ports. If problem persists, contact a qualified technician to check gas pressure. |
| Gas smell. | Gas leak. | Immediately turn off gas supply, open windows, do not operate electrical switches, and contact emergency services/gas supplier. |
8. Specifications
| Feature | Specification |
|---|---|
| Model Number | 106.0702.942 |
| Type | Toughened Black Glass, 8mm |
| Size | 70cm Width |
| Burners | 4 (2 x 2.5 Kw, 2 x 1.5 Kw) |
| Ignition | In-built Auto Electric, DC1.5 V Operated |
| Pan Support | Cast Iron |
| Knobs | Premium Metal Knobs |
| Burner Cap | Brass finish |
| Product Dimensions (D x W x H) | 52.5D x 70W x 13H Centimeters |
| Item Weight | 12 kg |
| Power Source | Corded Electric (for ignition) |
| Included Components | 1 Hobtop |
| Country of Origin | China |
9. Warranty & Support
Warranty Information:
- Glass & Valve: 5 Years Warranty
- Burner: 2 Years Warranty
- Comprehensive on Product: 1 Year Warranty
Please retain your purchase receipt as proof of purchase for warranty claims.
Customer Support:
For any service, installation, or warranty-related queries, please contact Faber customer support:
- Manufacturer: Franke Faber India Pvt Ltd
- Contact Number: 1800-209-3484
