HOWE BHB012

HOWE Queen Size Upholstered Platform Bed Frame

Model: BHB012 - Instruction Manual

1. Product Overview

The HOWE Queen Size Upholstered Platform Bed Frame is designed for comfort and style, featuring a 50.8-inch wingback headboard with corduroy upholstery and solid wood legs. This bed frame is engineered for stability and noise-free operation, eliminating the need for a box spring.

HOWE Queen Size Upholstered Platform Bed Frame in Cream

Figure 1: HOWE Queen Size Upholstered Platform Bed Frame (Cream)

Close-up of soft corduroy upholstery on headboard

Figure 2: Close-up of the soft corduroy upholstery, highlighting its texture.

50.8 inch wingback headboard design

Figure 3: The 50.8-inch wingback headboard, providing ample back support.

Solid wood legs with 4.5 inch clearance for cleaning

Figure 4: Solid wood legs offering 4.5 inches of clearance for easy cleaning.

2. Safety Information

  • Do not exceed the 1000 lb weight limit.
  • Be cautious of sharp edges and hardware during assembly.
  • Ensure all connections are securely tightened before use.
  • Keep small parts away from children during assembly to prevent choking hazards.

3. Parts List

Before beginning assembly, verify that all components are present and undamaged. The package includes:

  • 50.8" Wingback Headboard
  • Footboard
  • Side Rails (2)
  • Solid Wood Legs (4)
  • Wood Slats (12)
  • Center Support Beam and Legs
  • Hardware Pack (bolts, washers, nuts, Allen wrench)
  • Installation Manual (this document)
Diagram showing all bed frame components and dimensions

Figure 5: Exploded view of bed frame components and overall dimensions.

4. Setup and Assembly

Assembly typically requires two adults and takes approximately 1.5 hours. All necessary hardware is included in the package. Follow the steps below for proper assembly:

  1. Unpack all components and lay them out on a clean, soft surface to prevent scratches.
  2. Attach the side rails to the headboard and footboard using the provided hardware. Ensure all bolts are finger-tightened initially.
  3. Install the center support beam and its legs, ensuring they are properly aligned and secured.
  4. Place the wood slats across the bed frame. The slats are designed to support your mattress directly, eliminating the need for a box spring.
  5. Once all components are in place, fully tighten all bolts with the Allen wrench. Do not overtighten.
  6. Carefully move the assembled bed frame to its desired location.
Close-up of bed frame structure showing firm construction, Velcro design for faster fixing, and noise-free foam tape

Figure 6: Details of the bed frame's firm structure, Velcro slat attachment, and noise-free foam tape.

5. Operating Instructions

This platform bed frame is designed to be used with a Queen size mattress, ideally between 10 to 13 inches thick. The integrated wood slats provide ample support, making a box spring unnecessary. The frame features EVA foam to ensure a quiet and stable sleeping experience, free from squeaks or shifting.

6. Maintenance

To ensure the longevity and appearance of your bed frame, follow these maintenance guidelines:

  • Regular Inspection: Periodically check all bolts and connections to ensure they remain tight. Retighten if necessary.
  • Upholstery Care: For the corduroy fabric, gently vacuum with an upholstery attachment to remove dust and debris. Spot clean any spills immediately with a clean, damp cloth and mild soap, then blot dry. Avoid harsh chemicals.
  • Wood Leg Care: Wipe solid wood legs with a soft, dry cloth. Avoid abrasive cleaners.
  • Under-Bed Cleaning: The 4.5-inch clearance under the bed allows for easy cleaning with a robotic sweeper or vacuum.

7. Troubleshooting

If you encounter any issues with your bed frame, refer to the following common solutions:

  • Squeaking Noises: Check all bolts and connections for tightness. Loose hardware is a common cause of squeaks. Ensure the mattress is properly seated on the slats.
  • Instability/Wobbling: Verify that all legs are firmly on the ground and that the center support system is correctly installed and tightened. Ensure the bed frame is on a level surface.
  • Missing Parts: If any parts are missing or damaged upon arrival, please contact customer service immediately.

8. Specifications

BrandHOWE
Model NumberBHB012
SizeQueen
Product Dimensions87"L x 65.7"W x 50.8"H
MaterialCorduroy, Wood, Iron
ColorCream
Weight Capacity1000 lbs
Box Spring NeededNo
Recommended Mattress Thickness10"-13"
Ground To Item Distance4.5 Inches
Assembly TimeApprox. 1.5 hours (2 adults)

9. Warranty and Support

For any questions, concerns, or warranty information regarding your HOWE Queen Size Upholstered Platform Bed Frame, please contact our customer service team. Our responsive team aims to address all issues within 12 hours.

Please refer to your purchase documentation for specific warranty terms and conditions.

10. Product Video Overview

Video 1: Official product overview of the HOWE Corduroy Bed Frame with 50.8" Wingback Headboard, showcasing its features and design.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.