Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your SZELAM Projection Alarm Clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your experience with the product.
Package Contents
Upon unpacking, please ensure all items listed below are present:
- 1 x SZELAM Projection Alarm Clock
- 1 x Power Adapter
- 1 x USB-C Charging Cable
- 1 x Product Manual
Product Overview
Familiarize yourself with the various components and controls of your alarm clock:
Image: Front and back view of the SZELAM Projection Alarm Clock, highlighting the 7.4-inch display, USB-A output, USB-C output, USB-C input, time display, projection lens, settings button, auto dimming sensor, night light control button, speaker, and memory battery compartment.
Setup
- Power Connection: Connect the provided USB-C charging cable to the USB-C input port on the back of the alarm clock and plug the power adapter into a standard electrical outlet.
- Battery Backup: The clock includes a CR2 battery for memory backup. Ensure the plastic tab is removed from the battery compartment to activate it. This preserves time settings during power outages.
- Initial Time Setting: Press and hold the 'SET' button on the top of the clock. Use the '+' and '-' buttons to adjust the hour and minute. Press 'SET' again to confirm each setting.
- 12/24H Mode: Briefly press the 'SET' button to toggle between 12-hour and 24-hour time display modes.
Operating Instructions
Time Display Settings
- Brightness Adjustment: Press the 'Brightness' button (sun icon) on the top to cycle through 6 levels of display brightness (100%-80%-50%-30%-10%-OFF). The clock also features an auto-dimming sensor.
- Color Modes: Press the 'Color' button (lightbulb icon) to switch between 11 color modes for the digital display, including 4 dynamic RGB colors and 7 fixed color modes.
Image: The 7.4-inch LED mirror display showcasing various color modes for the time, including RGB Cycle, Random Color, RGB Flowing, White, Red, Yellow, Green, Light Blue, Blue, and Purple.
Projection Settings
- Activate/Deactivate Projection: Press the 'Projection' button (projector icon) to turn the time projection on or off.
- Projection Rotation: The projector arm can be rotated 180° to project the time onto a wall or ceiling.
- Projection Brightness: Repeatedly press the 'Projection' button to cycle through 4 levels of projection brightness.
Image: A hand rotating the projector arm of the alarm clock, demonstrating its 180-degree adjustability for projecting time onto a surface.
Alarm Settings
- Set Alarm: Press and hold the 'AL' button. Use the '+' and '-' buttons to set the desired alarm time. Press 'AL' again to confirm.
- Alarm Volume: Press the 'VOL' button to cycle through 5 alarm volume levels (55-65-75-85-95db).
- Snooze Function: When the alarm sounds, press the large 'Snooze' button on top to activate snooze for 5-60 minutes. To turn off the alarm, press any other button.
Image: A person pressing the snooze button on top of the alarm clock, with the display showing the time and a snooze icon, indicating the snooze function is active.
Night Light Settings
- Color Modes: Press the 'Light' button on the back to cycle through 10 night light color modes, including 3 dynamic RGB colors and 7 fixed color modes.
- Brightness Adjustment: The night light has 5 adjustable brightness levels.
Image: The alarm clock displaying various night light colors on its base, including RGB Flowing, RGB Changing, RGB Breathing, Warm White, Red, Yellow, Green, Light Blue, Blue, and Purple.
USB Charging Ports
- The clock is equipped with one USB Type-C output port and one USB-A output port, allowing you to charge up to two electronic devices simultaneously.
Image: A close-up of the back of the alarm clock, showing a USB-A output port and a USB-C output port, with charging cables connected to a smartphone and wireless earbuds.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the mirror display and the body of the clock. Avoid abrasive cleaners or solvents that may damage the surface.
- Placement: Place the clock on a stable, flat surface away from direct sunlight, excessive heat, or moisture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock not powering on | Power adapter not connected or faulty. | Ensure the power adapter is securely plugged into the clock and a working outlet. Try a different outlet or adapter. |
| Projection is dim or unclear | Projection brightness too low or too much ambient light. | Increase projection brightness using the 'Projection' button. Reduce ambient light in the room. Adjust projection angle. |
| Alarm not sounding | Alarm not set or volume too low. | Verify alarm time is set correctly. Increase alarm volume using the 'VOL' button. |
| Time display is too bright/dim | Display brightness not adjusted. | Adjust display brightness using the 'Brightness' button (sun icon). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SZUK-8853B-RG01 |
| Display Type | Digital LED Mirror |
| Screen Size | 7.4 Inches |
| Product Dimensions | 6.6"W x 3.8"H |
| Item Weight | 150 Grams |
| Power Source | Corded Electric, Battery Powered (CR2 backup) |
| Projection Distance | 1.64-11.4 feet (0.5-3m) |
| USB Output Ports | 1 x USB-A, 1 x USB-C |
| Display Colors | 11 (4 dynamic RGB + 7 fixed) |
| Night Light Colors | 10 (3 dynamic RGB + 7 fixed) |
| Alarm Volume Levels | 5 (55-95db) |
| Snooze Duration | 5-60 minutes |
Warranty and Support
Your SZELAM Projection Alarm Clock is covered by a 30-day unconditional refund/replacement policy and a 1-year warranty. If you encounter any issues or are not satisfied with your product, please contact SZELAM customer support via email for assistance. A solution will be provided within 24 hours.
Official Product Video
Video: An official product video from SZELAM demonstrating the features and functionality of the Projection Alarm Clock, including its RGB display, night light, and projection capabilities.