HGLRC Draknight

Download PDF
Contents

HGLRC Draknight 2 Inch FPV Racing Drone Frame Kit User Manual

Model: Draknight

Brand: HGLRC

1. Introduction

The HGLRC Draknight 2 Inch Frame Kit is engineered for high-performance FPV racing drones, offering a lightweight yet durable foundation for your build. Constructed from a combination of 3K carbon fiber and aluminum, this frame ensures optimal flight characteristics with high efficiency and low noise. This manual will guide you through the assembly, setup, and essential maintenance to maximize your drone's potential.

Assembled HGLRC Draknight 2 Inch FPV Racing Drone Frame Kit

Figure 1.1: Fully assembled HGLRC Draknight 2 Inch FPV Racing Drone Frame Kit, showcasing its compact and robust design.

2. Product Features

  • High-Performance Design: Features a lightweight and durable aluminum top piece combined with 3K carbon fiber material for high-efficiency and low-noise flight.
  • Durability and Stability: Built from premium materials for superior stability and longevity in various flight conditions.
  • Versatile Usability: Compact design suitable for racing, aerial footage capture, and exploring new terrains.
  • One-piece frame design: Provides a cool appearance and structural integrity.
  • CNC aluminum parts: Greatly enhance protection and are strong and resistant to explosion.
  • Multi-size battery compartment design: Offers flexibility for various battery sizes.
Diagram illustrating key features of the Draknight frame, including one-piece design, CNC aluminum parts, special BB sound tail light, and multi-size battery compartment.

Figure 2.1: Key features of the Draknight frame, highlighting its robust construction and thoughtful design elements.

3. What's in the Box

Your HGLRC Draknight 2 Inch Frame Kit includes the following components:

  • 1 x 2-Inch Frame Set
  • 1 x 2-Inch Frame Matching Print Set
  • 1 x 2-Inch Frame Matching Screw Bag Set
  • 1 x Frame Manual (this document)

4. Specifications

Detailed specifications for the Draknight 2 Inch Frame:

AttributeValue
Product NameDraknight 2-inch frame
Product TypeUltra-light toothpick FPV frame
Material3K Carbon Fiber, Aluminum
Frame Type2 inch frame
Wheelbase91 mm
Dimensions (L x W x H)74mm x 84mm x 28mm (approximate assembled)
Integrated Bottom Plate2mm
Internal Minimum Height12mm
Flight Control Mounting Hole25.5x25.5mm
Supported Camera Size14x14mm (for thumb camera)
Motor Mounting Hole3xm1.4
Frame Weight17g
Product parameters diagram showing dimensions, material, and mounting holes for the Draknight frame, along with an illustration of a thumb camera.

Figure 4.1: Detailed product parameters and dimensions of the Draknight 2-inch frame.

5. Assembly and Installation

Follow these steps carefully to assemble your HGLRC Draknight 2 Inch Frame Kit. Refer to the diagrams for visual guidance.

5.1 Exploded View and Component Identification

Exploded view diagram of the FPV frame assembly for Draknight, showing all components and screw types.

Figure 5.1: Exploded view of the Draknight frame components, including carbon fiber parts, CNC aluminum, screws, and TPU parts.

5.2 Installation Steps

  1. Step 1: Attach Bottom Plate and CNC Aluminum Parts. Use M2*4mm screws to fix the frame bottom plate and the CNC left and right aluminum parts. Ensure proper alignment before tightening.
  2. Installation step 1: Attaching the bottom plate and CNC aluminum parts with M2*4mm screws.

    Figure 5.2: Step 1 of assembly, showing M2*4mm screws securing the bottom plate and CNC aluminum parts.

  3. Step 2: Secure Fixed Air Intake. Install the M2*4mm fixed air intake component.
  4. Installation step 2: Securing the M2*4mm fixed air intake.

    Figure 5.3: Step 2 of assembly, illustrating the attachment of the M2*4mm fixed air intake.

  5. Step 3: Install Receiver Fixing Parts and Image Transmission Antenna Printing Parts. Attach the receiver fixing parts and image transmission antenna printing parts using the CNC aluminum buckle.
  6. Installation step 3: Attaching receiver fixing parts and image transmission antenna printing parts with CNC aluminum buckle.

    Figure 5.4: Step 3 of assembly, showing the installation of receiver and antenna components.

  7. Step 4: Insert Smooth Aluminum Column and Fix with Screw. Insert the M2*3.5*8mm smooth aluminum column into the tail section and secure it with an M2*4mm screw.

5.3 Wiring Diagram (Example)

While this manual focuses on the frame, proper wiring of your flight controller and other components is crucial. Below is an example wiring diagram for a typical flight controller setup. Always refer to the specific documentation for your flight controller and components.

Example wiring diagram for a flight controller, showing connections for Buzzer, LED, 5V, and GND.

Figure 5.5: Example wiring diagram for a flight controller, illustrating common connections.

6. Setup and Configuration

Once the frame is assembled, you will need to install and configure your electronic components (flight controller, ESCs, motors, FPV camera, VTX, receiver, etc.).

  • Flight Controller Mounting: Utilize the 25.5x25.5mm mounting holes for your flight controller. Ensure proper vibration dampening if necessary.
  • Motor Installation: Mount your motors using the 3xm1.4 mounting holes.
  • Camera Installation: The frame supports 14x14mm cameras. Secure your FPV camera in the designated slot.
  • Component Placement: Strategically place your ESCs, VTX, and receiver within the frame's internal space, considering weight distribution and airflow.
  • Firmware Configuration: After hardware installation, connect your flight controller to a computer and configure its firmware (e.g., Betaflight, Emuflight) according to your specific components and desired flight characteristics.

7. Operating Guidelines

This frame provides the structural foundation for your FPV drone. Safe and responsible operation of the complete drone system is paramount.

  • Always perform pre-flight checks, including propeller security, battery charge, and radio link integrity.
  • Operate your drone in open areas, away from people, animals, and obstacles.
  • Adhere to all local regulations and laws regarding drone operation.
  • Start with gentle flights to familiarize yourself with the drone's handling before attempting aggressive maneuvers.

8. Maintenance

Regular maintenance will extend the lifespan of your Draknight frame and ensure continued performance.

  • Inspect for Damage: After each crash or hard landing, thoroughly inspect the carbon fiber and aluminum parts for cracks, bends, or stress marks.
  • Check Screws: Periodically check all screws for tightness. Vibrations during flight can loosen fasteners.
  • Clean the Frame: Remove dirt, dust, and debris from the frame, especially around motor mounts and electronic components. Use a soft brush or compressed air.
  • Replace Damaged Parts: If any part of the frame is significantly damaged, replace it immediately to prevent further issues during flight.

9. Troubleshooting

This section addresses common issues related to the frame itself.

  • Loose Components: If components feel loose after assembly, re-check all screw connections and ensure they are tightened appropriately. Avoid over-tightening, which can strip threads.
  • Vibrations: Excessive vibrations can sometimes be traced to a bent or cracked frame arm. Inspect arms carefully. Ensure motors are securely mounted and propellers are balanced and undamaged.
  • Difficulty Fitting Components: Double-check that you are using the correct components for the specified mounting holes (e.g., 25.5x25.5mm for flight controller, 14x14mm for camera).

10. Support

For any questions or assistance regarding your HGLRC Draknight Frame Kit, please feel free to contact HGLRC customer service. We are committed to providing support and will assist you within 24 hours.

You can typically find contact information on the official HGLRC website or through the retailer where you purchased the product.

© 2024 HGLRC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.