INTEX 56294

Intex 56294 Tropical Canopy Island Lounge 224 cm

Model: 56294 | Brand: INTEX

1. Introduction

The Intex Tropical Canopy Island Lounge, measuring 224 cm, is a large inflatable lounge designed with an exotic canopy to provide shade and relaxation. This product is made from durable vinyl material and features a UV protective canopy, offering a comfortable and enjoyable experience on water.

Key Features:

  • 224 cm long tropical canopy island lounge.
  • Equipped with UV protective canopy.
  • Made from durable vinyl material.
Intex Tropical Canopy Island Lounge with two people relaxing in a pool

Image 1.1: The Intex Tropical Canopy Island Lounge in use, featuring its protective canopy and spacious design for two individuals.

2. Safety Information

WARNING: This is not a life-saving device. Do not leave children unattended while the device is in use. Use only under competent supervision. Always ensure the product is used in calm water conditions, away from strong currents or sharp objects. Do not over-inflate. The maximum weight capacity for this product is 200 kg.

Safety information specific to this product was not detailed in the provided product description. Always adhere to general safety guidelines for inflatable water products.

3. Setup

3.1. Inflation

  1. Unfold the island lounge on a clean, flat surface, free from sharp objects.
  2. Locate the inflation valves. This product typically features multiple air chambers for stability and safety.
  3. Using an air pump (not included), inflate each chamber until it is firm to the touch but not hard. Do not over-inflate, as this can cause damage.
  4. Ensure all valves are securely closed and pushed flush with the surface of the lounge after inflation.

3.2. Canopy Assembly

  1. Identify the canopy fabric and the support poles.
  2. Insert the support poles into the designated sleeves on the canopy fabric.
  3. Attach the assembled canopy frame to the corresponding attachment points on the inflatable lounge. These points are typically loops or clips located on the sides of the lounge.
  4. Ensure the canopy is securely fastened and taut to provide optimal shade.
Close-up of the canopy attachment point on the Intex Tropical Canopy Island Lounge

Image 3.1: Detail of the canopy attachment mechanism on the inflatable lounge.

4. Operating Instructions

4.1. Usage

  • Carefully place the inflated lounge into the water.
  • Board the lounge slowly and evenly to maintain balance.
  • Enjoy relaxation while the canopy provides shade from the sun.
  • Do not jump on or off the lounge.
  • Avoid using in windy conditions, as the canopy can act as a sail and cause the lounge to drift.

4.2. Weight Capacity

The Intex Tropical Canopy Island Lounge has a maximum weight capacity of 200 kilograms. Do not exceed this limit to ensure safety and product longevity.

Diagram showing the dimensions and 200 kg maximum weight capacity of the Intex Tropical Canopy Island Lounge

Image 4.1: Dimensional diagram indicating the lounge's measurements and maximum weight capacity.

5. Maintenance

5.1. Cleaning

  • After each use, rinse the lounge with fresh water to remove chlorine, salt, or dirt.
  • Wipe down with a soft cloth and mild soap if necessary.
  • Do not use harsh chemicals or abrasive cleaners, as these can damage the vinyl material.

5.2. Storage

  • Ensure the lounge is completely dry before deflating and storing.
  • Deflate all air chambers by opening the valves.
  • Fold the lounge neatly to prevent creases and damage.
  • Store in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Keep away from rodents and insects that could damage the material.

6. Troubleshooting

6.1. Slow Air Leak

  • Check all inflation valves to ensure they are securely closed and flush.
  • Inspect the entire surface of the lounge for small punctures. A common method is to spray soapy water over the inflated surface; bubbles will form at the leak site.
  • Use a vinyl repair kit (often sold separately) to patch any small holes.

6.2. Canopy Instability

  • Ensure all canopy support poles are fully inserted into their sleeves.
  • Verify that all canopy attachment points are securely fastened to the lounge.
  • Avoid using the lounge with the canopy in strong winds.

7. Specifications

FeatureDetail
Model Number56294 (Part Number: 68056294)
BrandINTEX
MaterialVinyl
Inflated Size (L x W x H)2.24m x 1.50m x 1.65m (224 cm x 150 cm x 165 cm)
Product Dimensions (L x W)2.24m x 1.5m
ColorMulti-color
Item Weight10.12 Kilograms
Maximum Weight Capacity200 Kilograms
Number of Items1 Package
Included ComponentsSea and Beach Toys/Equipment
Age Range DescriptionStandard
Front view of the Intex Tropical Canopy Island Lounge with its canopy extended

Image 7.1: Front view of the fully assembled Intex Tropical Canopy Island Lounge.

8. Warranty

This Intex product comes with a 2-year warranty. Please retain your proof of purchase for any warranty claims. The warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, or improper maintenance.

9. Support

For further assistance, questions, or to report any issues with your Intex Tropical Canopy Island Lounge, please refer to the contact information provided on the product packaging or visit the official Intex website. Always provide your model number (56294) when seeking support.

© 2023 Intex. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.