ORICO 40Gbps M.2 NVMe SSD Enclosure

1. Introduction

The ORICO 40Gbps M.2 NVMe SSD Enclosure provides a high-speed, external storage solution for M.2 NVMe SSDs. Designed for efficiency and ease of use, this enclosure features a built-in cooling fan and tool-free installation, ensuring optimal performance and data integrity. It supports various M-Key NVMe SSD sizes and is compatible with a wide range of devices via Thunderbolt 3/4 and USB4/3.2/3.1/3.0 interfaces.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x ORICO 40Gbps M.2 NVMe SSD Enclosure
• 1 x USB-C to A/C Cable (2-in-1)
• 1 x Thermal Pad
• 2 x Fasteners
• 1 x Instruction Book

Image: Contents of the ORICO 40Gbps M.2 NVMe SSD Enclosure package, including the enclosure, cables, thermal pad, fasteners, and instruction book.

3. Specifications

4. Setup & Installation

The ORICO M.2 NVMe SSD Enclosure features a tool-free design for easy installation. Follow these steps to install your M.2 NVMe SSD:

1. Open the Enclosure: Gently push the top casing of the enclosure upwards to slide it open.
2. Insert SSD: Align your M-Key NVMe SSD with the slot and insert it diagonally. Ensure it is fully seated.
3. Secure SSD: Use the provided fastener to secure the SSD in place.
4. Apply Thermal Pad: Place the thermal pad onto the SSD's controller chip to facilitate heat transfer to the heatsink.
5. Close the Enclosure: Slide the top casing downwards until it clicks securely into place.

Image: Visual guide demonstrating the tool-free installation process of an M.2 NVMe SSD into the ORICO enclosure, showing how to open, insert, secure, and close the device.

Important Note: This enclosure is not designed for SSDs with pre-installed heatsinks. Ensure your SSD does not have an integrated heatsink before installation to prevent compatibility issues.

5. Operating Instructions

Once your M.2 NVMe SSD is installed, connect the enclosure to your device:

1. Connect the Cable: Use the provided 2-in-1 USB-C to A/C cable. For 40Gbps transfer speeds, connect the USB-C to C end to a USB4.0 or Thunderbolt 3/4 port on your host device. For 10Gbps speeds, use the USB-C to A end.
2. Plug and Play: The enclosure is plug-and-play, requiring no additional drivers for Mac, Windows, or Linux systems. Your operating system should automatically detect the connected SSD.
3. Data Transfer: You can now access and transfer data to and from your SSD. Expect read/write speeds up to 3100MB/s when connected via a 40Gbps compatible port.

Image: Illustration of the ORICO enclosure's wide compatibility with various devices and operating systems, emphasizing its plug-and-play functionality.

Image: Graphic displaying the high-speed data transfer capabilities of the ORICO 40Gbps M.2 NVMe SSD Enclosure, showing read speeds of 2800 MB/s and write speeds of 2100 MB/s.

6. Heat Dissipation & Performance

The ORICO enclosure is engineered with multiple heat dissipation features to maintain optimal SSD performance and longevity:

• Built-in Silent Fan: Actively cools the M.2 SSD, preventing thermal throttling during intensive operations.
• Striped Aluminum Heatsink: Maximizes surface area for efficient heat dissipation.
• Silicone Cooling Pads: Ensures effective thermal contact between the SSD and the heatsink.

This multi-cooling combination helps keep the M.2 SSD at a safe operating temperature, ensuring consistent high-speed performance.

Image: Close-up view of the ORICO enclosure highlighting the built-in cooling fan, illustrating its active cooling capability.

Image: Exploded view of the ORICO enclosure showing the various heat dissipation components, including the striped aluminum sheet, heat dissipation holes, double-sided copper strip, cooling fan, and silicone thermal pad.

7. Compatibility Notes

To ensure proper functionality, please observe the following compatibility guidelines:

• Supported SSDs: M-Key NVMe SSDs (PCIe protocol) of sizes 2230, 2242, 2260, and 2280.
• Unsupported SSDs: SATA B-Key and B+M Key SSDs are not supported. SSDs with pre-installed heatsinks are also not compatible with this enclosure.
• Host Interface: To achieve 40Gbps transfer speeds, your host device must have a USB4.0 interface or a Thunderbolt 3/4 interface.
• Specific Exclusions: Not recommended for use with Crucial-P3 Plus, WD Black SN750, and Samsung 970 EVO Plus SSDs. Not compatible with Intel Thunderbolt ports prior to 12th Generation (except 12th Gen Intel processors). Compatible with AMD and Apple Thunderbolt ports.

Image: Diagram illustrating compatible M.2 NVMe SSD key types (M Key) and sizes (2280, 2260, 2242, 2230), along with a clear indication that SATA B-Key & B+M Key SSDs and SSDs with heatsinks are not supported.

8. Troubleshooting

If you encounter issues with your ORICO 40Gbps M.2 NVMe SSD Enclosure, consider the following:

• Device Not Recognized: Ensure the SSD is correctly installed and secured within the enclosure. Verify that the USB cable is firmly connected to both the enclosure and the host device. Try connecting to a different USB or Thunderbolt port.
• Slow Transfer Speeds: Confirm that your host device's port supports 40Gbps (USB4.0 or Thunderbolt 3/4) and that you are using the USB-C to C cable for maximum speed. Older USB ports (e.g., USB 3.0/3.1 Gen1) will operate at lower speeds.
• Overheating: Ensure the thermal pad is correctly placed on the SSD's controller chip. Verify that the built-in fan is operating. If the environment is excessively hot, consider using the enclosure in a cooler area. Note that some SSDs may naturally run hotter than others.
• Power Issues (Mac Mini): Some Mac Mini models may not provide sufficient power to external SSD enclosures, potentially leading to disconnects. If this occurs, try connecting the enclosure to a powered USB hub.
• SSD Compatibility: Double-check that your SSD is an M-Key NVMe type and does not have a pre-installed heatsink. Refer to the 'Compatibility Notes' section for specific exclusions.

9. Official Product Videos

Watch these official videos for additional guidance and product demonstrations:

10. Warranty & Support

For warranty information or technical support, please refer to the contact details provided in the included Instruction Book or visit the official ORICO website. Keep your purchase receipt for warranty claims.