Introduction
This instruction manual provides detailed guidance for the Dragonhawk X3 Wireless Tattoo Gun Kit. Designed for both beginners and experienced artists, this rotary machine offers stable performance for various tattooing styles, including lining and shading. Please read this manual thoroughly before use to ensure proper operation, safety, and longevity of your device.
Image: Overview of the Dragonhawk X3 Wireless Tattoo Gun Kit, highlighting its sleek design.
Kit Contents
Your Dragonhawk X3 Wireless Tattoo Gun Kit includes the following components:
- 1 x Dragonhawk X3 Wireless Rotary Tattoo Pen Machine
- 10 x Professional Cartridge Needles (5pcs 1205RL Round Liner, 5pcs 1205M Magnum)
- 2 x Black Tattoo Inks
- 1 x Practice Skin
- 1 x USB Type-C Charging Cable
- Multiple Ink Cups
- 1 x Pair of Gloves
- 1 x Roll of Gauze Tape
Image: All components included in the Dragonhawk X3 Wireless Tattoo Gun Kit, laid out for inspection.
Image: Individually packaged and disinfected ink cups, ensuring hygiene.
Setup Instructions
- Charge the Device: Before first use, fully charge the tattoo pen using the provided USB Type-C charging cable. The display will indicate charging status.
- Install Cartridge Needle: Gently push the desired cartridge needle into the front end of the tattoo pen until it clicks securely into place. Ensure it is firmly seated.
- Power On/Off: Press and hold the power button (center button) on the top of the pen to turn the device on or off. The digital display will illuminate.
- Adjust Voltage: Use the '+' and '-' buttons on the top of the pen to adjust the voltage. The voltage is adjustable from 5V to 12V in 0.1V increments.
- Adjust Needle Length: Rotate the grip of the tattoo pen to adjust the needle protrusion length according to your tattooing needs.
Image: Visual guide showing the four main steps for setting up the tattoo pen: installing needles, turning on power, adjusting voltage, and adjusting needle length.
Image: Close-up of the USB Type-C charging port on the Dragonhawk X3 tattoo pen, indicating compatibility with standard Type-C cords.
Video: This official product video demonstrates the unboxing, assembly of the cartridge needle, adjustment of voltage, and charging process for the Dragonhawk X3 Wireless Tattoo Gun Kit.
Operating the Tattoo Gun
The Dragonhawk X3 is designed for precise control and comfort during tattooing. Its ergonomic grip and balanced weight distribution help minimize hand fatigue during extended use.
Voltage Recommendations:
- Lining: For crisp lines, a voltage range of 6.5V - 7.5V is generally recommended.
- Shading: For smooth shading and color packing, a voltage range of 6.3V - 7.0V is typically effective.
These are general recommendations; optimal voltage may vary based on needle type, skin type, and personal preference. Always test on practice skin before working on actual skin.
Image: The Dragonhawk X3 tattoo pen being used for lining on practice skin, demonstrating its precision.
Image: The Dragonhawk X3 tattoo pen being used for shading on practice skin, showcasing its versatility.
Image: Close-up of the digital display and control buttons on the Dragonhawk X3, showing voltage adjustment.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your Dragonhawk X3 tattoo gun.
- Cleaning: After each use, wipe down the exterior of the machine with a suitable disinfectant wipe. Do not immerse the machine in liquid.
- Needle Disposal: Always dispose of used cartridge needles in a sharps container.
- Storage: Store the tattoo gun in a clean, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge it regularly, even if not in constant use.
Troubleshooting
If you encounter issues with your Dragonhawk X3, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not turn on | Low battery or no charge | Charge the device fully using the Type-C cable. |
| Needle not moving or weak operation | Improperly installed cartridge needle; Low voltage setting | Ensure needle is securely installed. Increase voltage using the '+' button. |
| Machine vibrates excessively | Loose cartridge needle; Internal component issue | Check and re-seat the cartridge needle. If issue persists, contact customer support. |
| Voltage display not working | Device off; Display malfunction | Ensure device is powered on. If still not working, contact customer support. |
Specifications
Key technical specifications for the Dragonhawk X3 Wireless Tattoo Gun:
| Feature | Detail |
|---|---|
| Model | X3 |
| Material | CNC Carved Aluminum Alloy Shell |
| Length | 126mm (4.96 inches) |
| Diameter | 32mm (1.19 inches) |
| Battery Capacity | 1500mAh |
| Continuous Working Time | Up to 6 hours |
| Adjustable Voltage | 5V - 12V |
| Stroke Length | 3.5mm |
| Motor | High-Performance Custom Motor (Mcore-A coreless motor) |
| Needle Compatibility | Universal with all standard tattoo cartridge needles |
| Charging Port | USB Type-C |
Image: Detailed specifications of the Dragonhawk X3 tattoo pen, including weight, size, battery capacity, voltage range, motor type, and stroke length.
Image: Illustration of the M-core A coreless motor, emphasizing its smooth and quiet operation within the tattoo machine.
Safety Warnings
- This device is intended for tattooing purposes only.
- Always use sterile, individually packaged needles and other consumables.
- Ensure proper hygiene and sterilization practices are followed to prevent cross-contamination.
- Keep out of reach of children.
- Do not attempt to disassemble or modify the device, as this may void the warranty and cause malfunction.
- Consult with a professional or local regulations regarding safe tattooing practices.
Warranty and Support
For warranty information, technical support, or any inquiries regarding your Dragonhawk X3 Wireless Tattoo Gun Kit, please refer to the contact details provided with your purchase or visit the official Dragonhawk website. Keep your proof of purchase for warranty claims.
