1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your iMaihom 150W 15000LM LED Motion Sensor Flood Light. Please read this manual thoroughly before installation and use to ensure proper function and safety. This flood light is designed for outdoor use, offering high brightness and multiple operational modes for enhanced security and convenience.
Image 1.1: The iMaihom 150W LED Motion Sensor Flood Light with its remote control.
2. Safety Information
Please observe the following safety precautions to prevent injury or damage:
- Electrical Safety: Installation must be performed by a qualified electrician or in accordance with local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
- Mounting: Mount the fixture securely to a stable surface. Do not mount on ceilings.
- Heat: The LED light heads can become warm during operation. Avoid touching them directly.
- Water Resistance: The fixture is IP65 rated for outdoor use, protecting against dust and water jets. However, it should not be submerged in water.
- Light Source: Do not stare directly into the LED light source when illuminated, as this may cause eye strain or damage.
3. Package Contents
Verify that all components are present before beginning installation:
- iMaihom 150W LED Motion Sensor Flood Light
- Remote Control
- Mounting Hardware (screws, wall anchors)
- User Manual (this document)
4. Product Features
The iMaihom 150W LED Motion Sensor Flood Light offers advanced features for outdoor lighting:
- High Brightness: 150W power output, delivering up to 15000 lumens of 6500K daylight white light.
- Adjustable Design: Three independently adjustable light heads for wide area coverage (up to 1977 sq.ft).
- Sensitive Motion Sensor: 180° sensing angle with a detection range of up to 50 feet.
- Multiple Modes: PIR (Motion Sensor) Mode, Dusk-to-Dawn (D2D) Mode, and Always-On Mode.
- Remote Control: Convenient wireless control for mode selection, timing, and brightness adjustment.
- Group Connection: Ability to link multiple lights to activate simultaneously when motion is detected (PIR mode only).
- Durable Construction: IP65 waterproof rating and full metal (aluminum) design for excellent heat dissipation and weather resistance.
Image 4.1: The IP65 waterproof design ensures reliable operation in various weather conditions.
Image 4.2: The full metal design with heat dissipation fins ensures optimal performance and longevity.
5. Setup and Installation
Follow these steps for safe and effective installation:
5.1 Mounting Location
Choose a suitable outdoor location for wall mounting. The recommended mounting height for optimal motion detection is 8-16 feet. Ensure the area is clear of obstructions that might interfere with the motion sensor's field of view.
5.2 Wiring
- Disconnect Power: Turn off the power at the circuit breaker before starting any wiring.
- Prepare Wires: Connect the household wiring to the flood light's wires according to local electrical codes. Typically, this involves connecting the live (black) wire, neutral (white) wire, and ground (green/bare copper) wire.
- Secure Connections: Use appropriate wire connectors and ensure all connections are secure and insulated.
5.3 Mounting the Fixture
- Attach Mounting Plate: Secure the mounting plate to the wall using the provided screws and anchors.
- Mount Light Fixture: Attach the flood light fixture to the mounting plate, ensuring it is firmly secured.
- Adjust Light Heads: Adjust the three light heads to cover the desired lighting area. Each head can be adjusted vertically and horizontally.
- Adjust Motion Sensor: Position the motion sensor for optimal detection coverage. It can be adjusted to achieve a 180° sensing angle.
Image 5.1: The flood light supports both soffit and wall mounting (note: not for ceiling mount).
Image 5.2: The light heads and motion sensor offer extensive adjustability for precise coverage.
6. Operating Instructions
The iMaihom flood light can be controlled using the included remote. Ensure the remote has working batteries.
6.1 Remote Control Overview
Image 6.1: RF Remote Controller functions for easy operation.
- PIR Function: Low/High sensing distance, 1Min/5Min/10Min sensing delay.
- D2D Mode: Dusk-to-Dawn mode with 3H/6H/8H timing options.
- Always ON/OFF: Manual override for constant light.
- Brightness Adjustable: Adjust light intensity.
- Pairing: Buttons for pairing main and auxiliary lights, and canceling pairing.
6.2 Operating Modes
The flood light features three primary operating modes:
6.2.1 PIR Mode (Motion Sensor Mode)
In PIR mode, the light activates when motion is detected and turns off after a set delay if no further motion is sensed. This mode is ideal for security and energy saving.
- Press the PIR button on the remote to activate. The light will flash, entering test mode.
- Use Low/High to set sensing distance.
- Use 1Min/5Min/10Min to set the lighting delay time after motion stops.
Image 6.2: Setting up PIR (Motion Sensor) Mode.
6.2.2 D2D Mode (Dusk-to-Dawn Mode)
In D2D mode, the light automatically turns on at dusk and off at dawn. You can set a specific duration for the light to remain on after dusk.
- Press the D2D button on the remote. The light will flash, indicating entry into light sensing mode.
- Select 3H/6H/8H for the desired lighting duration.
- To cancel timing, press the Timer Esc key.
Image 6.3: Setting up D2D (Dusk-to-Dawn) Mode.
6.2.3 Always-On Mode
This mode keeps the light continuously on until manually turned off. It does not have a timing function.
- Press the Always ON button to activate constant light.
- Press the Always OFF button to turn the light off.
- To cancel any active timing, press the Timer Esc key.
Image 6.4: Activating and deactivating Always-On Mode.
6.3 Group Connection (PIR Mode Only)
Multiple iMaihom flood lights can be linked to activate together when one detects motion. This function is only available in PIR mode.
- To pair a main light, press the Main button on the remote while pointing at the desired main light.
- To pair an auxiliary light, press the Auxiliary button on the remote while pointing at the desired auxiliary light.
- To cancel pairing, press the Pairing Esc button.
Image 6.5: Group connection allows multiple lights to activate simultaneously.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your flood light.
- Cleaning: Periodically clean the light heads and motion sensor lens with a soft, damp cloth to remove dust and debris. Do not use abrasive cleaners or solvents.
- Inspection: Regularly inspect the wiring and mounting for any signs of wear, damage, or loosening. Address any issues promptly.
- No User-Serviceable Parts: The LED light source is integrated and not user-replaceable. Do not attempt to open the light heads.
8. Troubleshooting
If you encounter issues with your iMaihom flood light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, incorrect wiring, remote battery dead, light in Always OFF mode. | Check circuit breaker. Verify wiring connections. Replace remote battery. Press 'Always ON' button. |
| Motion sensor not detecting. | Sensor obstructed, incorrect sensitivity setting, light in D2D or Always ON mode. | Clear obstructions. Adjust sensor angle. Set sensitivity to 'High'. Ensure light is in PIR mode. |
| Light stays on continuously. | Light in Always ON mode, D2D mode active, continuous motion detected. | Press 'Always OFF' or switch to PIR mode. Check D2D timing. Ensure no constant motion in sensor range. |
| Remote not working. | Dead battery, out of range, signal obstruction. | Replace remote battery. Move closer to the light. Ensure clear line of sight to the light's sensor. |
| Group connection not working. | Not in PIR mode, lights not properly paired, lights too far apart. | Ensure all lights are in PIR mode. Re-pair lights. Ensure lights are within 85ft (25m) of each other. |
If the problem persists after attempting these solutions, please contact customer support.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | BDD150G-3 |
| Power Consumption | 150W |
| Brightness | 15000 Lumens |
| Color Temperature | 6500K (Daylight White) |
| Voltage | 120V AC |
| Material | Aluminum |
| Water Resistance | IP65 |
| Motion Sensor Angle | 180° |
| Motion Sensor Distance | Up to 50 feet |
| Lighting Area | Up to 1977 sq.ft |
| Product Dimensions | 15.78"L x 6.18"W x 4.64"H |
| Item Weight | 2 Pounds |
| Control Method | Remote Control |
10. Warranty and Support
10.1 Warranty Information
iMaihom products are designed for quality and reliability. For specific warranty details regarding your 150W LED Motion Sensor Flood Light, please refer to the warranty card included with your purchase or visit the official iMaihom website. Keep your purchase receipt as proof of purchase for warranty claims.
10.2 Customer Support
If you have any questions, require technical assistance, or need to report an issue with your product, please contact iMaihom customer support. Contact information can typically be found on the product packaging, the official iMaihom website, or through your retailer.
When contacting support, please have your product model number (BDD150G-3) and purchase date available.
