Greesum 3-Piece Outdoor Bistro Rocking Chair Set with Glass Coffee Table User Manual

Introduction

Thank you for choosing the Greesum 3-Piece Outdoor Bistro Rocking Chair Set. This manual provides essential information for the safe assembly, operation, and maintenance of your new outdoor furniture. This set includes two rocking chairs and one glass coffee table, designed for use in various outdoor settings such as patios, balconies, and gardens.

Safety Information

Caution:

• The rocking chairs may tip over if used improperly. Always use the chairs with caution and ensure they are stable before sitting.
• The glass tabletop is fragile and can break if heavy objects are placed on it or if it is not properly maintained. Always handle the table with care and avoid placing hot or sharp objects on it.
• Ensure all bolts and screws are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the chairs or table.
• Keep children and pets away from the furniture during assembly.

Package Contents

Before assembly, please verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 2 x Rocking Chairs
• 1 x Glass Coffee Table
• 2 x Seat Cushions (Dark Black)
• Assembly Hardware (screws, washers, wrench)

Setup and Assembly Instructions

Assembly of the Greesum Bistro Set is required. It is recommended to assemble the furniture on a soft, clean surface to prevent scratches. While assembly is generally straightforward, having an additional person may be helpful.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out and identify each piece. Note that parts are not individually marked, but the design is intuitive.
2. Assemble Rocking Chairs: Follow the provided diagram for connecting the chair frame components. Ensure all holes align correctly before tightening screws. Do not fully tighten screws until all parts are loosely connected.
3. Assemble Coffee Table: Connect the table legs to the tabletop frame. Place the tempered glass top onto the frame, ensuring it is secured by the integrated suction cups.
4. Final Tightening: Once all components are in place for both chairs and the table, gradually tighten all screws using the provided wrench. Ensure all connections are firm and stable.
5. Place Cushions: Position the dark black seat cushions onto the rocking chairs.

Assembly typically takes between 30 minutes to an hour, depending on your familiarity with furniture assembly. No extra screws are included, so keep all hardware secure during the process.

Operating Instructions

Using the Rocking Chairs

The chairs feature a balanced rocking design for relaxation. Sit comfortably in the chair and gently push off with your feet to initiate the rocking motion. The design allows for a smooth and comfortable rock without concerns of tipping under normal use. The wide, deep seating area and upholstered cushions are designed for enhanced comfort during leisure.

Using the Coffee Table

The coffee table is designed to hold drinks, snacks, and small personal items. The tempered glass top is secured by suction cups for stability. Avoid placing excessively heavy objects on the table to prevent damage to the glass.

Maintenance

Cleaning

• Frame and Wicker: Wipe the powder-coated steel frame and PE wicker with a dry cloth to remove dust and debris. For stubborn dirt, a damp cloth with mild soap can be used, followed by drying thoroughly.
• Cushions: The seat cushions feature removable black polyester covers for easy cleaning. Zip off the covers and follow the care instructions on the label, typically machine wash cold and tumble dry low.
• Glass Tabletop: Clean the tempered glass tabletop with a glass cleaner and a soft cloth. Wipe spills promptly to prevent stains.

General Care

• To prolong the life of your furniture, consider using outdoor furniture covers during harsh weather conditions or extended periods of non-use.
• Periodically inspect all bolts and connections to ensure they remain tight. Re-tighten as needed.
• Avoid exposing the furniture to extreme temperatures or direct sunlight for prolonged periods without protection, as this may cause fading or material degradation over time.

Troubleshooting

• Difficulty with Assembly: If screw holes do not align perfectly, try loosening all screws slightly on the connected parts, adjust the alignment, and then re-tighten. Ensure you are using the correct screws for each part as per the diagram.
• Unstable Chairs: Double-check that all assembly bolts are fully tightened. Ensure the chairs are placed on a flat, even surface.
• Cushions Seem Thin: The included cushions provide basic comfort. For enhanced comfort, consider purchasing thicker replacement cushions of suitable dimensions.
• Limited Rocking Motion: The chairs are designed with a specific rocking angle for safety and comfort. If you find the rocking motion limited when lifting your feet, this is part of the design to prevent over-rocking.

Specifications

Warranty and Support

For any questions regarding product assembly, missing parts, or general inquiries, please contact Greesum customer support. Specific warranty details may vary; please refer to your purchase documentation or the retailer's website for the most accurate warranty information.