Important Safety Information
Please read all instructions carefully before installation and use. Retain this manual for future reference.
- Always disconnect power before installing or servicing the fixture.
- Do not install in wet locations or areas exposed to direct water spray. This product is for indoor use only.
- Ensure the power source voltage matches the product's requirements (120V AC).
- Do not attempt to modify or disassemble the fixture. There are no user-serviceable parts inside.
- Keep away from flammable materials.
- If you are unsure about installation, consult a qualified electrician.
Package Contents
Verify that all components are present before beginning installation:
- MaxLite LED Garage Light (1 unit)
- Power Cord with On/Off Switch and Plug (pre-attached)
- Mounting Hardware (hook, chain)
- User Manual (this document)
Image: The MaxLite LED Garage Light showing its four adjustable panels, power cord with switch, and included hanging chain and hook.
Product Features
- Adjustable LED Panels: Four panels can be adjusted from 0-90 degrees to direct light where needed.
- Daisy-Chain Linkable Design: Allows multiple units to be connected and powered from a single outlet (ensure total wattage does not exceed circuit capacity).
- Integrated On/Off Switch with Plug: Provides convenient control and easy connection to a standard 120V outlet.
- No Bulb Socket Required: Designed for direct plug-in use, eliminating the need for existing light bulb sockets.
- 5000K Color Temperature: Provides a bright, cool white light suitable for garages and workshops.
- Aluminum Heatsink: Ensures efficient heat dissipation for prolonged LED lifespan.
- High Brightness: Delivers 5400 lumens of illumination.
Image: A close-up view of the LED panels, highlighting their adjustable nature and the integrated LED chips.
Setup and Installation
The MaxLite LED Garage Light is designed for easy installation. It can be semi-flush mounted or hung using the provided chain and hook.
Installation Steps:
- Choose Location: Select a suitable indoor location in your garage, workshop, or storage room that has access to a 120V AC power outlet. Ensure the mounting surface can support the weight of the fixture (1.68 lbs).
- Prepare Mounting Point:
- For hanging: Securely install the provided hook into a ceiling joist or appropriate anchor point.
- For semi-flush mount: Use appropriate screws and anchors (not explicitly listed as included, but implied by "Mounting Hardware" and "Semi Flush Mount" spec) to secure the main body of the light directly to the ceiling.
- Attach Light Fixture:
- For hanging: Attach the chain to the light fixture and hang it from the secured hook.
- For semi-flush mount: Align the fixture with the mounting points and secure it firmly.
- Connect Power: Plug the power cord into a standard 120V AC outlet.
- Adjust Panels: Adjust the four LED panels to your desired angle (0-90 degrees) to optimize light distribution in your space.
Image: The MaxLite LED Garage Light shown installed and illuminated in a garage setting, demonstrating its wide light coverage.
Operating Instructions
Operating the MaxLite LED Garage Light is straightforward:
- Power On/Off: Use the integrated on/off switch located on the power cord to turn the light on or off.
- Adjust Light Direction: Gently pivot each of the four LED panels to direct light to specific areas. The panels can be adjusted up to 90 degrees.
- Daisy-Chain Functionality: If you have multiple linkable MaxLite garage lights, connect them in series using the provided linking ports (if applicable, not explicitly mentioned as having linking ports, but "Daisy-chain linkable design" implies it). Ensure the total wattage of linked lights does not exceed the maximum capacity of your power circuit.
Maintenance
The MaxLite LED Garage Light requires minimal maintenance.
- Cleaning: Ensure the light is turned off and unplugged before cleaning. Use a soft, dry cloth to wipe down the exterior of the fixture. Do not use abrasive cleaners, solvents, or spray liquids directly onto the light.
- LED Lifespan: The integrated LEDs are designed for long-term use and do not require replacement.
- Inspection: Periodically inspect the power cord and fixture for any signs of damage. If damage is found, discontinue use and contact customer support.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| Light flickers or dims. |
|
|
| Panels do not adjust smoothly. |
|
|
Specifications
| Attribute | Detail |
|---|---|
| Brand | MaxLite |
| Model Name | MaxLite Garage Light |
| Model Number | GL-054UB50 |
| Power Source | Corded Electric |
| Voltage | 120 Volts (AC) |
| Wattage | 54 watts |
| Brightness | 5400 Lumens |
| Color Temperature (CCT) | 5000K (Cool White) |
| Light Source Type | LED |
| Material | Aluminum |
| Color | Black |
| Product Dimensions | 12.83"L x 12.83"W x 3.85"H |
| Item Weight | 1.68 Pounds |
| Indoor/Outdoor Usage | Indoor |
| Installation Type | Semi Flush Mount / Hanging |
Warranty and Support
This MaxLite LED Garage Light is covered by a 1-year manufacturer's limited warranty from the date of purchase.
This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, accident, unauthorized repair, or improper installation.
For warranty claims or technical support, please contact MaxLite customer service. Refer to the product packaging or the official MaxLite website for current contact information.
