1. Introduction
The DMMBMFC 54W 18 LED Red Light Therapy Lamp is designed to provide targeted light therapy using a combination of 660nm deep red and 850nm near-infrared LEDs. This device features an adjustable lamp holder with a clamp for versatile positioning, allowing for convenient use in various settings. It is intended for indoor use to support general well-being.
2. Package Contents
Please verify that all items listed below are included in your package:
- 1 x Red Light Therapy Lamp (54W, 18 LEDs)
- 1 x Clamp with Lamp Holder (E26/E27 compatible)
- 1 x 1.5m Power Cord (for 110V)
- 1 x English Instruction Manual

Image: The DMMBMFC 54W 18 LED Red Light Therapy Lamp with its adjustable clamp holder.
3. Specifications
| Brand | DMMBMFC |
| Model Name | DMMBMFC-RedLightTherapyLamp-54W-Infrared-18LED |
| Power Consumption | 54 Watts |
| Light Source Type | LED |
| Number of LEDs | 18 (9x 660nm Deep Red, 9x 850nm Near Infrared) |
| Wavelengths | 660nm (Red), 850nm (Near Infrared) |
| Irradiance | > 141mW/cm² (at target distance) |
| Beam Angle | 60 Degrees |
| Bulb Base | E26/E27 |
| Voltage | 100-240 Volts, 60 Hertz |
| Material | Aluminum (for heat dissipation) |
| Dimensions | 4.76"W x 4.76"H |
| Item Weight | 1.72 pounds |
| Lifespan | 50,000+ hours |
| Indoor/Outdoor Usage | Indoor Only |
4. Setup Instructions
- Attach the Red Light Therapy Lamp: Carefully screw the red light therapy bulb into the E26/E27 socket of the lamp holder until secure.
- Secure the Clamp: Identify a stable surface (e.g., desk, shelf, headboard) where you wish to position the lamp. Open the clamp and firmly attach it to the desired surface. Ensure the clamp has a strong grip to support the lamp's weight.
- Adjust Position: Use the adjustable light pole to angle the lamp as needed. The flexible design allows for precise positioning towards the target area.
- Connect to Power: Plug the 1.5m power cord into a standard 110V electrical outlet.

Image: An illustration detailing the components of the clamp lamp holder, including the adjustable pole, lamp installation interface, ON/OFF switch, and power plug.
Video: A demonstration of assembling and positioning the red light therapy lamp with its clamp holder.
5. Operating Instructions
- Power On: Locate the ON/OFF switch on the power cord and slide it to the "ON" position. The red LEDs will illuminate. Note that the 850nm near-infrared LEDs are invisible to the naked eye, so only half of the chips may appear illuminated.
- Positioning: Position the lamp 3 to 6 inches away from the skin surface of the target area. The adjustable light pole allows for flexible aiming.
- Session Duration: For optimal results, use the device for 5 to 25 minutes per session, with 20 minutes being a common recommendation for targeted treatment areas such as the face, shoulders, knees, or waist.
- Power Off: After your session, slide the ON/OFF switch to the "OFF" position.

Image: Visual representation of 660nm red light for skin health and hair regrowth, and 850nm near-infrared light for deep tissue repair and pain relief.

Image: A woman enjoying a red light therapy session, demonstrating typical usage for body areas.
6. Safety Guidelines
- Eye Protection: Avoid direct eye exposure to the light. It is recommended to wear protective eyewear during use, especially when treating areas near the face.
- Indoor Use Only: This device is designed for indoor use. Do not expose it to water or use it in damp environments.
- Ventilation: Ensure adequate ventilation around the lamp during operation to prevent overheating. The aluminum heat sink is designed for efficient heat dissipation.
- Power Compatibility: Only use the provided 1.5m power cord with a 110V electrical outlet. Ensure the voltage matches your local power supply.
- Children and Pets: Keep the device out of reach of children and pets.
- Medical Advice: Consult with a healthcare professional before using this device if you have any medical conditions, are pregnant, or are taking medications that may increase light sensitivity.
- Inspection: Regularly inspect the device for any damage to the cord, plug, or lamp. Do not use if damaged.

Image: An illustration demonstrating how 660nm red light and 850nm near-infrared light penetrate the epidermis, dermis, and hypodermis layers of the skin.
7. Maintenance
- Cleaning: Ensure the device is unplugged and cool before cleaning. Wipe the surface of the lamp and holder with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the device in a cool, dry place away from direct sunlight and moisture when not in use.
- Heat Dissipation: The lamp features built-in aluminum cooling fins. Do not obstruct these fins during operation to ensure proper heat dissipation and prolong the device's lifespan.
8. Troubleshooting
- Device does not turn on:
- Check if the power cord is securely plugged into both the lamp holder and the electrical outlet.
- Ensure the ON/OFF switch on the cord is in the "ON" position.
- Verify that the electrical outlet is functional by plugging in another device.
- Some LEDs do not appear to be working:
The DMMBMFC Red Light Therapy Lamp uses both 660nm (red) and 850nm (near-infrared) LEDs. The 850nm near-infrared LEDs are invisible to the naked eye. It is normal for only the red LEDs to be visibly illuminated during operation, while the near-infrared LEDs are still functioning.
- Lamp holder is not stable:
- Ensure the clamp is securely fastened to a stable surface.
- Adjust the position of the lamp to balance its weight if necessary.
9. Warranty and Support
The DMMBMFC 54W 18 LED Red Light Therapy Lamp comes with a 12-month warranty from the date of purchase. Additionally, a 30-day return/refund policy is available. For any product inquiries, technical support, or warranty claims, please contact DMMBMFC customer service through your original point of purchase.