1. Introduction
The Aideepen 4-30V 0-5.0A USB C Tester Voltmeter is a compact and versatile device designed to measure various electrical parameters of USB-C compatible devices. It features a 0.96-inch IPS color LCD screen for clear data display and supports bidirectional testing. This manual provides essential information for the safe and effective use of your USB C Tester.
Image: The Aideepen USB C Tester Voltmeter, showcasing its compact form factor and the vibrant display.
2. Product Features
- Multifunctional Type-C Tester: Detects voltage, current, capacity, power, and other real-time data.
- High-Definition Display: 0.96-inch IPS color LCD screen with 160-degree wide viewing angle, high brightness, and long lifespan.
- Power-Off Memory Function: Stores capacity and energy data for later viewing, suitable for mobile power measurements.
- Bidirectional Testing: Supports connection in both directions.
- Wide Applicability: Compatible with QC2.0, QC3.0, and PD fast charging protocols. Ideal for quality inspection of 3C digital peripherals.
Image: The USB C Tester highlighting its HD color screen and compatibility features.
3. Setup and Connection
The USB C Tester is designed for simple plug-and-play operation. It can be connected in two directions, allowing for flexible use with various devices and chargers.
- Identify the USB-C port on your power source (e.g., USB charger, PD charger, power bank).
- Connect one end of the Aideepen USB C Tester to the power source's USB-C port.
- Connect your device (e.g., mobile phone, notebook) to the other end of the Aideepen USB C Tester.
- The tester's screen will automatically light up and display the measurement data.
Image: Connection diagram illustrating how to connect the USB C Tester between a charger and a device, supporting both USB and PD chargers.
4. Operating Instructions
4.1 Display and Data Interpretation
The 0.96-inch IPS color screen displays multiple parameters simultaneously, including voltage (V), current (A), capacity (mAh), energy (mWh), load resistance (Ω), power (W), temperature (℃), and measurement time (T).
Image: A magnified view of the tester's display, emphasizing its 4-digit precision for accurate readings.
4.2 Button Functions
- Short Press: Switches between different display pages to view various data sets.
- Double Quick Press: Rotates the display orientation by 180 degrees for convenience.
- Press and Hold (3 seconds): Clears all stored capacity and energy data.
4.3 Power-Off Memory
The device retains capacity and energy data even after being disconnected from power. This allows for cumulative measurements over time, particularly useful for evaluating power banks or battery capacities.
5. Maintenance
- Keep the device clean and dry. Avoid exposure to liquids or excessive moisture.
- Do not attempt to disassemble or modify the device, as this will void any potential warranty and may cause damage.
- Store the tester in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
6. Troubleshooting
- No display: Ensure the tester is correctly connected between a power source and a load. Check if the power source is active.
- Inaccurate readings: Ensure connections are secure. If issues persist, try connecting to a different power source or device to rule out external factors.
- Data not clearing: Ensure you press and hold the button for at least 3 seconds to clear stored data.
7. Specifications
| Parameter | Value |
|---|---|
| Voltage Measurement Range | 4-30 V |
| Current Measurement Range | 0-5 A |
| Voltage Resolution | 0.002 A |
| Current Resolution | 0.002 A |
| Capacity Measurement Range | 0-999999 mWh |
| Load Resistance Range | 1-9999.9 Ω |
| Power Measurement Range | 0-150 W |
| Temperature Measurement Range | 0-80 ℃ |
| Energy Measurement Range | 0-999999 mWh |
| Measurement Time Range | 0-99 hours |
| Product Interface | USB-C 24-pin |
| Test Direction | Bidirectional |
| Display Type | 0.96-inch IPS Color Screen |
| Model Number | A7X-JM0425A |
| Product Weight | 20 g |
| Dimensions | 12 x 10.3 x 2.1 cm (Package) |
8. Wide Application Examples
The Aideepen USB C Tester is suitable for a variety of applications, including:
- Testing mobile power banks
- Evaluating USB chargers and PD chargers
- Monitoring car chargers
- Checking the performance of cell phones and notebooks
- Verifying data line quality
- Interfacing with electronic loads for testing
Image: An illustration demonstrating the wide range of applications for the USB C Tester with different devices and power sources.
