DJI 6941565969903

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

DJI Osmo Pocket 3 Creator Combo User Manual

Model: 6941565969903 | Brand: DJI

Introduction

This user manual provides essential information for the operation and maintenance of your DJI Osmo Pocket 3 Creator Combo. Please read this manual thoroughly before using the device to ensure proper function and safety.

DJI Osmo Pocket 3 Creator Combo with microphone and mini tripod

Figure 1: The DJI Osmo Pocket 3 Creator Combo, showing the camera unit, wireless microphone, and mini tripod.

What's in the Box

The DJI Osmo Pocket 3 Creator Combo includes the following components:

  • Osmo Pocket 3 x1
  • Type-C to Type-C PD Cable x1
  • Osmo Pocket 3 Protective Cover x1
  • DJI Wrist Strap x1
  • Osmo Pocket 3 Handle With 1/4″ Thread x1
  • Osmo Pocket 3 Wide-Angle Lens x1
  • DJI Mic 2 Transmitter (Shadow Black) x1
  • DJI Mic 2 Windscreen x1
  • DJI Mic 2 Clip Magnet x1
  • Osmo Pocket 3 Battery Handle x1
  • Osmo Mini Tripod x1
  • Osmo Pocket 3 Carrying Bag x1
Contents of the DJI Osmo Pocket 3 Creator Combo box

Figure 2: All components included in the DJI Osmo Pocket 3 Creator Combo package.

Setup Guide

1. Charging the Device

Before first use, ensure the Osmo Pocket 3 and Battery Handle are fully charged. Connect the device to a USB-C power adapter (sold separately, DJI 30W USB-C Charger recommended) using the provided Type-C to Type-C PD Cable.

  • Charging to 80% takes approximately 16 minutes.
  • Full charge (100%) takes approximately 32 minutes.
DJI Osmo Pocket 3 being charged

Figure 3: The Osmo Pocket 3 connected to a power source for charging.

2. Inserting a microSD Card

A microSD card is required to save footage. Locate the microSD card slot on the device and insert a compatible card (up to 512GB) until it clicks into place.

3. Attaching the Battery Handle and Mini Tripod

Align the Battery Handle with the bottom of the Osmo Pocket 3 and push firmly until it locks. The Osmo Mini Tripod can then be screwed into the 1/4" thread on the bottom of the Battery Handle for stable placement.

DJI Osmo Pocket 3 with battery handle and mini tripod attached

Figure 4: The Osmo Pocket 3 assembled with the battery handle and mini tripod.

Operating Instructions

1. Powering On/Off

To power on, rotate the 2-inch touchscreen. To power off, rotate the screen back to its closed position or press and hold the power button.

2. Basic Controls

  • Touchscreen: Navigate menus, change settings, and preview footage.
  • Joystick: Control gimbal movement (pan/tilt) and zoom.
  • Record Button: Start/stop recording video or take photos.
  • Function Button: Switch between photo/video modes, recenter gimbal.

3. Shooting Modes and Features

The Osmo Pocket 3 offers various shooting modes and intelligent features:

  • 4K/120fps Video: Capture high-resolution, smooth slow-motion footage.
  • ActiveTrack 6.0: Automatically track subjects, keeping them in frame.
  • D-Log M & 10-bit Color: For advanced color grading in post-production.
  • Stereo Recording: Enhanced audio capture with the built-in 3-mic array.
  • Horizontal-Vertical Switching: Rotate the screen for quick orientation changes.
DJI Osmo Pocket 3 showing horizontal and vertical shooting modes

Figure 5: The rotatable screen allows for seamless switching between horizontal and vertical shooting orientations.

4. Using the DJI Mic 2 Transmitter

The DJI Mic 2 Transmitter provides high-quality wireless audio. Power on the transmitter and it will automatically pair with the Osmo Pocket 3. Clip the transmitter to your subject for clear voice recording.

DJI Osmo Pocket 3 with DJI Mic 2 Transmitter

Figure 6: The DJI Mic 2 Transmitter connected wirelessly to the Osmo Pocket 3 for enhanced audio recording.

Maintenance and Care

  • Cleaning: Use a soft, dry cloth to clean the camera lens and screen. Avoid harsh chemicals.
  • Storage: Store the Osmo Pocket 3 in its protective cover and carrying bag when not in use to prevent damage to the gimbal and screen.
  • Firmware Updates: Regularly check for and install firmware updates via the DJI Mimo app for optimal performance and new features.
DJI Osmo Pocket 3 in its protective case

Figure 7: The Osmo Pocket 3 stored securely in its protective cover.

Troubleshooting

ProblemPossible CauseSolution
Device does not power on.Low battery; screen not rotated correctly.Charge the device fully. Ensure the screen is rotated to the open position.
Footage is shaky.Gimbal obstruction; calibration needed.Ensure no obstructions around the gimbal. Perform gimbal calibration via settings.
Cannot connect to DJI Mimo app.Bluetooth/Wi-Fi off; outdated app version.Enable Bluetooth/Wi-Fi on your mobile device. Download the latest DJI Mimo app from the official DJI website.
Microphone not recording audio.Mic 2 not paired or low battery.Ensure DJI Mic 2 is powered on and paired. Charge the Mic 2 transmitter.

For a comprehensive troubleshooting guide, please refer to the official DJI website or the PDF manual linked in the product information.

Technical Specifications

FeatureDetail
Image Sensor1-inch CMOS
Video ResolutionUp to 4K/120fps
Stabilization3-Axis Mechanical Gimbal
Screen2-inch Rotatable Touchscreen
FocusingFull-Pixel PDAF
Color Depth10-bit D-Log M
Audio Format48 kHz 16-bit; AAC
StorageMicroSD (up to 512GB)
Battery LifeUp to 166 minutes (1080p/24fps)
Dimensions1.32 x 5.5 x 1.66 inches
Weight6.3 ounces

Warranty Information

The DJI Osmo Pocket 3 Creator Combo comes with a standard manufacturer's warranty. For detailed terms and conditions, please refer to the official warranty document provided with your product or visit the DJI official website.

A PDF version of the warranty information is available here: DJI Warranty (PDF).

Support and Contact

For further assistance, technical support, or service inquiries, please contact DJI customer support through their official channels:

© 2024 DJI. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.