1. Introduction
Thank you for choosing the FR Multi-Function Cooling Cup Holder. This device is designed to enhance your comfort in recliners and sofas by providing a convenient beverage holder with integrated cooling, LED illumination, and touch controls for your furniture's lift mechanism. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your cup holder.
2. Safety Information
- Ensure the power supply is disconnected before installation or maintenance.
- Do not expose the cup holder to excessive moisture or liquids beyond its intended use.
- Avoid placing extremely hot beverages directly into the cup holder, as the cooling function is designed for chilled or room-temperature drinks.
- Keep out of reach of children to prevent accidental operation or damage.
- This product is designed for specific furniture systems. Refer to your furniture's manual for compatibility.
3. Package Contents
Verify that all components are present upon unboxing:
- FR Multi-Function Cooling Cup Holder (Model HX43ECRL)
- Integrated 8-pin connector cable
- (Note: Control box JCTBOX005, light strip LIGHT005, and slave cup CUP086 are sold separately and are part of a larger system.)
4. Product Overview
The FR Multi-Function Cooling Cup Holder integrates several features for enhanced convenience:
- Blue LED Lighting: An internal blue light ring illuminates the cup holder.
- Cooling Fan: A built-in fan helps maintain the temperature of your beverage.
- Touch Sensor Controls: Integrated touch sensors on the rim control the cup holder's light, cooling fan, and the recliner's lift mechanism (open/close).
- Waterproof Design: The cup holder is designed to be waterproof for durability and easy cleaning.
- Double Tier Design: Accommodates various drink sizes, from cans to larger beverages.
Figure 1: Overall view of the FR Multi-Function Cooling Cup Holder, showing the main unit and its attached 8-pin connector cable for system integration.
Figure 2: Top view of the cup holder, illustrating the illuminated blue LED ring and the clearly labeled touch controls for Light, Open, Close, and Cool functions.
5. Setup and Installation
This cup holder is designed to integrate into compatible recliner or sofa systems. It connects via a round 8-pin style connector to a control box (e.g., FR part #JCTBOX005).
- Preparation: Ensure your recliner or sofa is powered off and disconnected from the main power supply.
- Placement: Insert the cup holder into the designated opening in your furniture. Ensure it is seated securely.
- Connection: Locate the corresponding 8-pin port on your furniture's control box. Carefully align the 8-pin connector from the cup holder with the port and push firmly until it clicks into place.
- Power On: Once connected, reconnect your furniture to the power supply.
- Test: Test all functions (LED, cooling, recliner open/close) to ensure proper installation.
Note: For detailed instructions on integrating with specific control boxes or other system components (like light strips or slave cups), refer to the documentation provided with those components or contact FR customer service.
6. Operating Instructions
The cup holder features intuitive touch controls located on its rim.
- Light Control: Touch the "Light" icon to toggle the blue LED illumination on or off.
- Cooling Fan Control: Touch the "Cool" icon (snowflake symbol) to activate or deactivate the cooling fan.
- Recliner Open: Touch the "Open" icon to extend the recliner's lift mechanism.
- Recliner Close: Touch the "Close" icon to retract the recliner's lift mechanism.
Note: The responsiveness of the recliner's lift mechanism depends on the furniture's motor and control box.
7. Maintenance
Regular maintenance ensures the longevity and performance of your cup holder.
- Cleaning: The cup holder is waterproof. Use a damp cloth with mild soap to clean the interior and exterior surfaces. Avoid abrasive cleaners. Ensure the unit is powered off before cleaning.
- Fan Vents: Periodically check the cooling fan vents for dust or debris accumulation. Gently clean with a soft brush or compressed air to ensure proper airflow.
- Connections: Ensure the 8-pin connector remains securely attached to the control box.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Cup holder not responding (no light, no cooling, no recliner control). | No power to the furniture system; loose 8-pin connection. | Check if the furniture is plugged in and powered on. Verify the 8-pin connector is securely plugged into the control box. |
| Cooling fan not working. | Fan obstructed; cooling function not activated. | Ensure the "Cool" touch control is activated. Check for any obstructions in the fan vents and clean if necessary. |
| Blue LED light not illuminating. | Light function not activated. | Touch the "Light" control to turn it on. |
| Recliner lift mechanism not responding. | Loose connection; furniture motor issue; control box issue. | Verify the 8-pin connection. If other functions work, the issue might be with the furniture's motor or control box. Consult your furniture's manual or FR customer service. |
If troubleshooting steps do not resolve the issue, please contact FR customer service for further assistance.
9. Specifications
- Model: HX43ECRL
- Brand: FR
- Product Dimensions: 4.5 x 4.5 x 6 inches
- Connector Type: Round 8-pin style
- Features: Blue LED lighting, Cooling fan, Touch controls (Light, Open, Close, Cool), Waterproof, Double-tier design.
- Compatibility: Designed for recliners and sofas with compatible control box systems (e.g., FR part #JCTBOX005).
10. Warranty and Support
For warranty information, please refer to the documentation provided with your original purchase or visit the official FR website. For technical support, replacement parts, or additional information, please contact FR customer service. When contacting support, please have your product model number (HX43ECRL) and purchase details available.
FR Customer Service: Visit the FR Store on Amazon