GoolRC 8K HD EIS FPV Drone User Manual

1. Introduction

This manual provides essential information for the safe operation and maintenance of your GoolRC 8K HD EIS FPV Drone. Please read it thoroughly before operating the drone to ensure proper usage and to prevent damage or injury. This drone features an 8K HD camera with Electronic Image Stabilization (EIS), a brushless motor, 360° obstacle avoidance, and various intelligent flight modes.

2. Safety Guidelines

• Operate the drone in open areas, away from people, animals, buildings, and power lines.
• Maintain a safe distance from the drone during flight.
• Do not fly in strong winds, rain, or other adverse weather conditions.
• Ensure batteries are fully charged and properly installed before each flight.
• Always keep the drone within your line of sight.
• Follow all local regulations and laws regarding drone operation.
• Avoid flying near airports or restricted airspace.
• The manufacturer recommends this product for users aged 16 years and up.

3. Package Contents

Verify that all items are present in your package:

• GoolRC 8K HD EIS FPV Drone
• Remote Control
• Flight Batteries (2 included)
• Spare Propeller Blades (set of 4)
• USB Charging Cable
• Screwdriver
• Carrying Case
• User Manual (this document)

Image: The complete package contents of the GoolRC drone, showing the drone, remote controller, two batteries, spare propeller blades, USB charging cable, screwdriver, and a compact carrying case.

4. Product Overview

4.1 Drone Components

Image: The GoolRC drone in its unfolded state, highlighting the camera module, brushless motors, and overall design.

• Brushless Motors: Provide stable and powerful flight performance.
• 8K HD Camera: Front-facing camera for high-resolution photo and video capture. Features EIS for stable footage.
• Bottom Camera: Secondary camera for optical flow positioning and alternative perspectives.
• Obstacle Avoidance Sensors: Located around the drone for 360° detection.
• Foldable Arms: Allow for compact storage and portability.
• LED Lights: Indicate drone status and aid in orientation.

4.2 Remote Controller

Image: The remote controller with a smartphone attached, illustrating the layout of control sticks, buttons for functions like one-click takeoff/landing, speed switching, headless mode, obstacle avoidance switch, and fine-tuning controls.

• Left Joystick: Controls altitude (up/down) and rotation (left/right).
• Right Joystick: Controls forward/backward and left/right movement.
• One-Click Takeoff/Landing Button: Initiates automatic takeoff or landing.
• Speed Switching Button: Toggles between different flight speeds.
• Headless Mode Button: Activates/deactivates headless flight mode.
• Obstacle Avoidance Switch: Toggles the 360° obstacle avoidance feature.
• Fine-Tuning Buttons: Adjusts drone trim for stable hovering.
• Power Switch: Turns the remote controller on/off.
• Phone Holder: Secures your smartphone for FPV viewing and app control.

5. Setup

5.1 Charging Batteries

Charge both the drone flight battery and the remote controller battery before first use. Use the provided USB charging cable. The drone battery is a 3.7V 1800mAh modular battery.

• Connect the USB charging cable to a USB power adapter (not included) and the battery.
• Charging indicators will show the charging status. Disconnect once fully charged.

5.2 Installing Propellers

Ensure propellers are installed correctly. Each propeller is marked (A or B) and must match the corresponding motor arm. Use the provided screwdriver to secure them.

5.3 Drone Preparation

• Unfold the drone arms carefully until they click into place.
• Insert the charged flight battery into the drone until it is securely latched.

5.4 App Installation and Connection

Download the official GoolRC drone app from your smartphone's app store. Follow the in-app instructions to connect your drone via Wi-Fi for FPV viewing and advanced control features.

Image: A smartphone displaying the drone control application, illustrating various flight directions and modes accessible via the app.

6. Operating Instructions

6.1 Pre-Flight Checklist

• Ensure drone and remote control batteries are fully charged.
• Propellers are correctly installed and secure.
• Drone arms are fully extended.
• Fly in a safe, open environment.
• Calibrate the drone before first flight or if moving to a new location.

6.2 Taking Off and Landing

• Manual Takeoff: Push both joysticks to the bottom-outer corners to unlock motors, then slowly push the left joystick up to ascend.
• One-Click Takeoff: Press the dedicated one-click takeoff button on the remote control. The drone will automatically ascend to a safe hovering altitude.
• Manual Landing: Slowly pull the left joystick down until the drone lands, then hold for a few seconds to stop the motors.
• One-Click Landing: Press the dedicated one-click landing button. The drone will automatically descend and land.

6.3 Flight Modes and Features

Image: Visual representations of the drone's intelligent flight capabilities, including gesture-controlled photography, six-axis gyroscope for stability, trajectory flight planning, and Follow Me mode.

• 360° Intelligent Obstacle Avoidance: The drone automatically detects and avoids obstacles in its flight path. Activate/deactivate using the dedicated switch on the remote.
• EIS Anti-shake Camera: The built-in Electronic Image Stabilization ensures clear and stable images and videos during flight.
• Optical Flow Hovering: Utilizes a bottom camera to maintain a stable hover, improving shooting accuracy.
• Headless Mode: In this mode, the drone's orientation is relative to the pilot, simplifying control regardless of the drone's front direction.
• Follow Me Mode: The drone will automatically follow the remote controller or a designated subject (via app).
• Trajectory Flight: Draw a path on the app screen, and the drone will fly along the specified route.
• 360° Flips: Execute aerial stunts with a dedicated button (refer to app or remote instructions for specific controls).

6.4 Camera Operation

Image: The drone's camera system, illustrating the ability to switch between the front-facing camera and the bottom camera for varied perspectives.

• Photo/Video Capture: Use the dedicated buttons on the remote control or the app interface to take photos or start/stop video recording.
• Dual Camera Switching: Switch between the front 8K HD camera and the bottom camera for different views.
• Adjustable Camera Angle: The front camera angle can be adjusted (90°-120°) for optimal shooting.
• Gesture Photography/Video: Perform specific hand gestures in front of the camera to trigger photo or video capture (refer to app for gesture details).

7. Maintenance

7.1 Cleaning

Regularly clean the drone body, camera lens, and sensors with a soft, dry cloth. Avoid using liquids or harsh chemicals.

7.2 Propeller Replacement

If a propeller is damaged, replace it immediately with a spare. Ensure the new propeller is the correct type (A or B) and securely fastened with the provided screwdriver.

7.3 Battery Care

• Store batteries in a cool, dry place.
• Do not overcharge or over-discharge batteries.
• If not used for an extended period, charge batteries to approximately 50% capacity.
• Dispose of damaged or swollen batteries properly according to local regulations.

8. Troubleshooting

9. Specifications

10. Warranty and Support

For warranty information and technical support, please refer to the contact details provided with your purchase documentation or visit the official GoolRC website. Keep your proof of purchase for any warranty claims.