Introduction
Thank you for choosing the Stadler Form Sam Little Fan Heater. This compact and efficient fan heater is designed to provide targeted warmth in small spaces. It features an integrated thermostat, two adjustable heating levels (800W and 1500W), and essential safety mechanisms including tip-over and overheat protection. This manual provides detailed instructions for safe and effective use of your appliance.
Important Safety Instructions
Please read all instructions carefully before using the appliance and retain for future reference.
- Always place the heater on a firm, level surface.
- Do not cover the heater or block air inlets/outlets.
- Keep flammable materials (curtains, furniture, bedding) at least 1 meter (3 feet) away from the heater.
- Do not use in bathrooms, laundry areas, or similar wet locations.
- Ensure the voltage indicated on the rating label corresponds to your mains voltage.
- Unplug the heater when not in use or before cleaning.
- Overheat Protection: The heater is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool, and remove any obstructions before restarting.
- Tip-over Protection: The heater includes a safety switch that automatically turns off the unit if it is accidentally tipped over. Place the heater upright on a stable surface to resume operation.
- Do not operate the heater with a damaged cord or plug.
- Supervise children and pets when the heater is in operation.
Product Overview
Familiarize yourself with the components of your Stadler Form Sam Little Fan Heater.
Image 1: Front view of the Stadler Form Sam Little Fan Heater, showcasing its compact tower design and black grille.
Image 2: Another front view of the heater, highlighting the power indicator light at the top.
Image 3: Side view of the heater, showing the sleek white casing and the "Stadler Form" branding.
Image 4: Rear view of the heater, illustrating the removable air filter panel and power cord connection point.
Image 5: Top view of the control panel, featuring the temperature adjustment knob, power level buttons (1 and 2), and the power button.
Setup
- Unpacking: Carefully remove the heater from its packaging. Retain packaging for storage or future transport.
- Placement: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater from walls, furniture, and other objects to allow for proper airflow and prevent fire hazards.
- Power Connection: Plug the power cord into a standard electrical outlet (220-240V, 50/60Hz). Ensure the outlet is easily accessible.
Operating Instructions
- Power On/Off: Press the power button (⏻) on the top panel to turn the heater on or off. The indicator light will illuminate when the unit is on.
- Adjusting Heating Level:
- Press the "1" button for the lower heating level (800W).
- Press the "2" button for the higher heating level (1500W).
- Setting the Thermostat:
- Rotate the "TEMPERATURE" knob to set your desired room temperature.
- The heater will operate until the set temperature is reached, then automatically switch off. It will restart when the room temperature drops below the set level.
Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning the Exterior: Unplug the heater before cleaning. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Cleaning the Air Filter:
- Ensure the heater is unplugged and cool.
- Locate the air filter panel on the back of the unit (refer to Image 4 in Product Overview).
- Gently remove the filter.
- Wash the filter under running water or use a vacuum cleaner to remove dust.
- Allow the filter to dry completely before reinserting it into the heater.
- Clean the filter regularly, especially if the heater is used frequently or in dusty environments.
- Storage: If storing the heater for an extended period, unplug it, clean it thoroughly, and store it in a cool, dry place, preferably in its original packaging.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Tip-over switch activated. Overheat protection activated. | Check if the power cord is securely plugged in and the outlet is functional. Ensure the heater is on a flat, stable surface. Unplug, allow to cool for 30 minutes, and remove any obstructions. |
| Heater turns off unexpectedly. | Overheat protection activated. Tip-over switch activated. Room temperature reached set thermostat level. | Unplug, allow to cool, and remove obstructions. Ensure the heater is upright on a stable surface. Adjust the thermostat to a higher setting if more heat is desired. |
| Reduced heating performance. | Blocked air inlets/outlets. Dirty air filter. | Ensure no objects are blocking the heater's vents. Clean the air filter as described in the Maintenance section. |
Specifications
| Brand | Stadler Form |
| Model Number | S-009E |
| Color | White/Black |
| Dimensions (L x W x H) | 12.7 x 13.2 x 36.5 cm (5 x 5.2 x 14.4 inches) |
| Weight | 3.38 Kilograms (7.45 lbs) |
| Power Levels | 2 (800 W / 1500 W) |
| Voltage | 230 Volts |
| Special Features | Tip-over protection, Overheat protection, Adjustable temperature, Electronic thermostat |
| Heating Method | Forced Air |
| Intended Use | Indoor (Office, Home) |
Warranty and Support
Stadler Form products are manufactured with high-quality materials and undergo strict quality control. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
Spare parts are generally available for a period of 1 year from the date of purchase.
For technical support, warranty claims, or further assistance, please visit the official Stadler Form website or contact their customer service department. Contact information can typically be found on the product packaging or the official brand website.
