Monster MH12005

Monster Wireless Earbuds User Manual

Model: MH12005

Introduction

Thank you for choosing Monster Wireless Earbuds. This manual provides essential information for setting up, operating, and maintaining your earbuds to ensure optimal performance and longevity. Please read this manual thoroughly before use.

Monster Wireless Earbuds in their open charging case

Image: Monster Wireless Earbuds, black with gold accents, resting in their open charging case. One earbud is shown outside the case.

Setup

1. Charging the Earbuds and Case

Before first use, fully charge the earbuds and the charging case. Connect the provided USB-C cable to the charging port on the case and to a power source. The indicator lights on the case will show the charging status.

  • Ensure the earbuds are properly seated in the charging case.
  • A full charge typically takes approximately 1.5-2 hours for the case and earbuds.

2. Bluetooth Pairing

The earbuds will automatically enter pairing mode when removed from the charging case for the first time. If they have been previously paired, they will attempt to reconnect to the last connected device.

  1. Open the charging case and remove both earbuds.
  2. On your device (smartphone, tablet, etc.), enable Bluetooth.
  3. Search for "Monster Achieve 300 AirLinks" (or similar name) in the list of available Bluetooth devices.
  4. Select the earbuds to connect. A voice prompt will confirm successful pairing.
Bluetooth 5.3 pairing screen on a smartphone

Image: A smartphone screen displaying Bluetooth settings, showing "Monster Achieve 300 AirLinks" as a connected device, illustrating the Bluetooth 5.3 fast and stable connection feature.

For subsequent uses, the earbuds will automatically connect to your device once removed from the case, provided Bluetooth is enabled on your device.

Operating Instructions

Smart Touch Control

Your Monster Wireless Earbuds feature intuitive touch controls on each earbud for managing audio playback and calls. The touch-sensitive area is located on the outer surface of each earbud.

Diagram of smart touch controls on an earbud

Image: A circular diagram illustrating the various smart touch control functions on the earbud, including Volume +, Volume -, Previous Track, Next Track, Voice Assistant, Play/Pause, Answer, and Hang Up.

Touch Control Functions
ActionFunction
Single Tap (L/R)Play/Pause music, Answer/End call
Double Tap (L)Previous Track
Double Tap (R)Next Track
Triple Tap (L)Volume Down
Triple Tap (R)Volume Up
Long Press (2s) (L/R)Activate Voice Assistant (Siri, Google Assistant)
Long Press (2s) during incoming callReject Call

Microphones and Noise Cancelling

The earbuds are equipped with built-in microphones combined with Environmental Noise Cancellation (ENC) technology. This technology helps to reduce ambient noise during calls, providing clearer voice transmission.

Person wearing Monster Wireless Earbuds

Image: A person wearing the Monster Wireless Earbuds, demonstrating their in-ear fit and highlighting the built-in microphones with ENC technology for crisp voice calls.

Maintenance

Cleaning and Care

To maintain the performance and hygiene of your earbuds, regular cleaning is recommended.

  • Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
  • For ear tips (made of silicone), remove them and clean with a damp cloth and mild soap if necessary, then dry thoroughly before reattaching.
  • Avoid using abrasive materials, alcohol, or chemical cleaners.
  • Keep the charging contacts on both the earbuds and the case clean and free of debris.

Battery Life and Charging Tips

Your earbuds offer extended playtime with the charging case.

Graphic showing 32 hours of playtime for Monster Wireless Earbuds

Image: A graphic illustrating the battery life of the Monster Wireless Earbuds, showing 8 hours of playtime on a single charge and a total of 32 hours with the charging case. It also highlights fast charging via Type-C.

  • Single Charge Playtime: Up to 8 hours.
  • Total Playtime with Charging Case: Up to 32 hours.
  • Fast Charging: 10 minutes of Type-C charging provides approximately 120 minutes of playtime.
  • Store the earbuds in their charging case when not in use to protect them and keep them charged.
  • Avoid exposing the earbuds or case to extreme temperatures, humidity, or liquids.

Troubleshooting

If you encounter any issues with your Monster Wireless Earbuds, please refer to the following common solutions:

Common Issues and Solutions
ProblemPossible Solution
Earbuds not pairing/connecting
  • Ensure earbuds are charged.
  • Turn off and on Bluetooth on your device.
  • Forget "Monster Achieve 300 AirLinks" from your device's Bluetooth list and re-pair.
  • Place earbuds back in the case, close, wait 5 seconds, then remove them again.
Only one earbud playing sound
  • Ensure both earbuds are charged.
  • Place both earbuds back in the charging case, close the lid, and then open it again to reset the connection.
  • Try re-pairing the earbuds with your device.
Low volume or poor sound quality
  • Adjust the volume on both your device and the earbuds.
  • Ensure ear tips are properly sealed in your ear canal. Try different sized ear tips if available.
  • Clean any debris from the earbud speakers and ear tips.
  • Ensure there are no obstructions between the earbuds and your device.
Earbuds not charging
  • Ensure the charging cable is securely connected to both the case and the power source.
  • Check if the charging contacts on the earbuds and inside the case are clean.
  • Try a different charging cable or power adapter.
Touch controls not responding
  • Ensure your fingers are clean and dry.
  • Try resetting the earbuds by placing them in the case and then removing them.
  • Ensure the earbuds are securely in your ears.

Specifications

Detailed technical specifications for your Monster Wireless Earbuds:

FeatureDetail
Model NameMH12005
Connectivity TechnologyWireless (Bluetooth 5.3)
Ear PlacementIn Ear
Form FactorIn Ear
Noise ControlNone (Features Environmental Noise Cancellation for calls)
MaterialSilicone (for ear tips)
Compatible DevicesBluetooth-enabled devices
Water Resistance LevelWater Resistant
Frequency Range20 Hz - 20,000 Hz
Impedance30 Ohm
Driver Size10mm Titanium Diaphragm Dynamic Driver
ColourBlack Gold
BatteriesRechargeable (included)
ManufacturerJonter
Item Dimensions (Parcel)10.39 x 9.09 x 4.19 cm; 109 g
Exploded view of earbud components, highlighting 10mm driver

Image: An exploded diagram of the earbud's internal components, emphasizing the 10mm titanium diaphragm dynamic driver, which provides natural sound with deep bass.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official Monster website. Keep your proof of purchase for warranty claims.

If you require further assistance, please contact Monster customer service through their official channels.

Note: Specific warranty terms and conditions may vary by region and retailer.

© 2024 Monster. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.