Neideso 11.5ft Type-C Hardwire Kit User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Neideso 11.5ft Type-C Hardwire Kit. This kit is designed to provide a stable power supply to your dash camera or other Type-C USB powered devices, enabling features like 24-hour parking monitoring and offering essential low voltage protection for your vehicle's battery.

Product Overview

Image: Neideso 11.5ft Type-C Hardwire Kit showing the main cable, voltage converter, and fuse taps.

The Neideso 11.5ft Type-C Hardwire Kit is a dedicated power solution for dash cameras and other compatible devices. It features a Type-C USB output, a voltage input range of 12V-24V, and provides a steady 5V/2.5A output. Key features include low voltage protection to prevent car battery drain and support for 24-hour parking monitoring when connected to a compatible dash camera.

Image: The Neideso 11.5ft Type-C Hardwire Kit, including the main cable, voltage regulator, and a selection of fuse taps for different vehicle fuse box types.

Setup and Installation

Proper installation of the hardwire kit is crucial for optimal performance and to enable features like parking monitoring. This kit connects directly to your car's fuse box, providing a hidden and permanent power source.

Installation Steps:

1. Identify Fuse Box: Locate your vehicle's fuse box. Refer to your vehicle's owner's manual for its exact location.
2. Identify ACC and BAT+ Fuses:
   • ACC (Accessory) Fuse: This fuse provides power only when the vehicle's ignition is on. Use a circuit tester to find a fuse that is live when the ignition is on and off when the ignition is off. Connect the red cable from the hardwire kit to this ACC fuse using an appropriate fuse tap.
   • BAT+ (Battery Positive) Fuse: This fuse provides constant power, even when the vehicle is off. Use a circuit tester to find a fuse that is always live. Connect the yellow cable from the hardwire kit to this BAT+ fuse using an appropriate fuse tap.
3. Connect GND (Ground) Cable: Connect the black cable from the hardwire kit to a metal part of the car chassis, such as a bolt or screw, to establish a secure ground connection.
4. Route Cables: Carefully route the hardwire kit cable from the fuse box to your dash camera's mounting location, ensuring it is hidden and does not interfere with vehicle operation.
5. Connect to Dash Camera: Plug the Type-C connector of the hardwire kit into your dash camera's power input port.

Important Note: Ensure all connections are secure. Incorrect wiring can lead to malfunctions or damage to your vehicle's electrical system or the dash camera. If you are unsure about any step, consult a professional.

Operating Instructions

24-Hour Parking Monitoring:

When the hardwire kit is correctly installed and connected to a compatible dash camera, the 24-hour parking monitoring mode can be activated through your dash camera's settings. This feature allows your dash camera to remain powered and record events even when your vehicle is turned off, providing continuous surveillance.

Low Voltage Protection:

The hardwire kit is equipped with an integrated low voltage protection mechanism. This system automatically monitors your car battery's voltage. If the voltage drops below 11.8V (with a tolerance of +/- 0.2V) for more than 60 seconds, the hardwire kit will automatically cut off power to the dash camera. This prevents excessive discharge of your car battery, ensuring that your vehicle can start reliably. This feature also includes protection against over-current, short-circuit, reverse connection, and overheating.

Note: This hardwire kit is designed for vehicles with 12V-24V electrical systems and is not applicable to trucks or other vehicles with voltages above 24V.

Maintenance

To ensure the longevity and reliable operation of your hardwire kit, consider the following maintenance guidelines:

• Periodically check all cable connections (fuse box, ground, and dash cam) to ensure they remain secure and free from corrosion.
• Keep the hardwire kit's voltage converter module free from excessive heat or moisture.
• Avoid tugging or pulling on the cables, which can damage internal wiring or connections.

Troubleshooting

If you encounter issues with your Neideso 11.5ft Type-C Hardwire Kit, refer to the following common troubleshooting steps:

• Dash Camera Not Powering On:
  • Verify that the Type-C connector is fully inserted into the dash camera.
  • Check the fuse taps in the vehicle's fuse box to ensure they are correctly installed and the fuses are not blown.
  • Confirm the ground connection is secure to a bare metal part of the chassis.
  • Ensure your vehicle's battery voltage is above the low voltage protection threshold (11.8V).
• Parking Monitoring Not Working:
  • Confirm that the yellow (BAT+) wire is connected to a constant power fuse in the fuse box.
  • Check your dash camera's settings to ensure parking monitoring mode is enabled and configured correctly.
  • Ensure the vehicle's battery voltage is sufficient for continuous operation during parking mode.
• Intermittent Power:
  • Inspect all wiring for any signs of damage, pinching, or loose connections.
  • Ensure the fuse taps are making good contact within the fuse box.

If these steps do not resolve the issue, please contact Neideso customer support for further assistance.

Specifications

Warranty Information

The Neideso 11.5ft Type-C Hardwire Kit comes with a 1-Year Replacement Warranty for quality-related issues. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Customer Support

For any questions, technical assistance, or warranty claims regarding your Neideso 11.5ft Type-C Hardwire Kit, please contact Neideso customer service. Refer to the product packaging or the official Neideso website for the most current contact information.