Pxwaxpy HX65P3 65W GaN III 3-Port USB C Wall Charger

1. Introduction

Thank you for choosing the Pxwaxpy HX65P3 65W GaN III 3-Port USB C Wall Charger. This device is designed to provide efficient and fast charging for a wide range of electronic devices, including laptops, smartphones, and tablets. Utilizing advanced GaN III technology, it offers a compact design with multiple safety features. Please read this manual carefully before use to ensure optimal performance and safety.

2. Safety Information

• Do not expose the charger to liquids, moisture, or extreme temperatures.
• Avoid dropping or subjecting the charger to strong impacts.
• Do not attempt to disassemble, repair, or modify the charger. This will void the warranty and may cause damage or injury.
• Ensure the charger is used in a well-ventilated area.
• Keep out of reach of children.
• Unplug the charger from the power outlet when not in use or during electrical storms.
• Use only with compatible devices and cables.

3. Product Features

The Pxwaxpy HX65P3 charger incorporates several features for enhanced performance and user convenience:

• 65W Max Output: Delivers up to 65W of power for fast charging of compatible devices.
• 3-Port Design: Features two USB-C ports and one USB-A port for simultaneous charging of multiple devices.
• GaN III Technology: Utilizes Gallium Nitride (GaN) technology for a more compact and efficient design.
• Foldable Plug: Equipped with a foldable plug for portability and easy storage.
• Advanced Safety Protections: Includes over-power, over-voltage, over-charge, and over-temperature protection.
• Wide Compatibility: Supports various fast charging protocols including PD 3.0, QC 3.0, PPS, AFC, and SCP.

Image: The charger supports 3x fast charging with GaN III technology, offering PD 3.0 65W Max and QC 3.0 65W Max outputs.

Image: Advanced GaN Technology provides over-power, over-voltage, over-charge, and over-temperature protection.

Image: The charger features a compact design, approximately 63% smaller than standard adapters, and includes a convenient foldable plug for portability.

4. Setup

1. Unfold the Plug: Gently unfold the AC prongs from the charger body.
2. Connect to Power Outlet: Insert the charger into a standard wall power outlet (100-240V AC).
3. Connect Devices: Use appropriate charging cables to connect your devices to the USB-C or USB-A ports on the charger.
4. Verify Charging: Ensure your device indicates that it is charging. The charger's indicator light will illuminate when connected to power.

5. Operating Instructions

The Pxwaxpy HX65P3 charger features intelligent power distribution across its three ports. The maximum output for each port varies depending on whether one or multiple ports are in use.

Image: Detailed output specifications for USB-C1, USB-C2, and USB-A ports, including supported fast charging protocols.

• USB-C1 Output: Up to 65W Max (PD3.1/PPS/QC5.0/AFC/SCP). Supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3.25A, 3.3-21V/3A.
• USB-C2 Output: Up to 45W Max (PD3.0/PPS/QC5.0/AFC/SCP). Supports 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A, 3.3-21V/3A.
• USB-A Output: Up to 18W Max (PD3.0/QC3.0/AFC/SCP). Supports 4.5V/5A, 5V/4.5A, 5V/3A, 9V/2A, 12V/1.5A, 20V/3.25A.

When multiple devices are connected, the charger intelligently distributes power. For optimal fast charging, connect high-power devices to the USB-C1 port first.

Image: The charger is suitable for use in various environments, including home, travel, and office settings, providing versatile charging solutions.

6. Specifications

7. Troubleshooting

• Device not charging:
  • Ensure the charger is securely plugged into a working wall outlet.
  • Check that the charging cable is properly connected to both the charger and your device.
  • Try a different charging cable or port.
  • Verify your device is compatible with the charger's output specifications.
• Slow charging:
  • Ensure your device and cable support fast charging protocols (e.g., PD, QC).
  • If multiple devices are connected, the power output per port may be reduced. Try charging a single device for maximum speed.
  • Check if the cable is damaged or of low quality, which can impede charging speed.
• Charger feels warm:
  • It is normal for the charger to become warm during operation, especially during high-power charging.
  • If it becomes excessively hot or emits smoke/odor, immediately unplug it and discontinue use.

8. Maintenance

• Clean the charger with a soft, dry cloth. Do not use liquid cleaners or aerosols.
• Store the charger in a cool, dry place when not in use.
• Avoid wrapping cables tightly around the charger, as this can damage the cable or ports over time.

9. Warranty and Support

This Pxwaxpy product is covered by a standard manufacturer's warranty. For specific warranty terms, technical support, or customer service inquiries, please refer to the warranty card included with your purchase or contact Pxwaxpy customer support through their official website or the retailer where the product was purchased. Please have your model number (HX65P3) and proof of purchase ready when contacting support.