INTEX Jurassic Adventure Inflatable Play Center User Manual

Important Safety Information

Read and understand all instructions before setting up and using this product. Failure to follow these instructions may result in serious injury or death.

• Adult Supervision Required: Never leave children unattended in or near the play center. Drowning can occur quickly and silently.
• Age Recommendation: This product is designed for children aged 2 years and older.
• Water Depth: Ensure water depth is appropriate for the age and height of the children using the play center.
• Flat Surface: Always set up the play center on a level, stable surface free of sharp objects.
• Electrical Safety: Keep all electrical devices away from the play center.
• Drain Completely: Always drain the play center completely after use to prevent accidental drowning.
• No Diving: Do not dive or jump into the play center.

Package Contents

Verify that all components are present before beginning assembly:

• Inflatable Play Center (main pool structure)
• 3 Inflatable Dinosaurs
• 2 Inflatable Cacti
• Volcano Ball Pit (freestanding)
• 6 FunBallz

Setup Instructions

1. Site Preparation

• Choose a flat, level area in your backyard, clear of any sharp objects, rocks, or debris.
• Ensure the area is large enough to accommodate the inflated play center (approximately 79"L x 79"W x 14"H).

2. Inflation

An air pump (not included) is recommended for quick and efficient inflation. The estimated assembly time is 5 minutes.

• Unfold the main inflatable play center structure on the prepared surface.
• Locate the inflation valves on the main structure and the individual inflatable accessories (dinosaurs, cacti, volcano ball pit).
• Using an air pump, inflate each section until it is firm to the touch but not over-inflated. Do not use high-pressure air compressors.
• Securely close all inflation valves after inflation.

Image: The fully inflated Intex Jurassic Adventure Play Center, showcasing its overall design and components.

3. Water Connection (for Sprayer)

• Locate the water inlet connection on the play center, typically near the volcano sprayer feature.
• Attach a standard garden hose to this inlet. Ensure the connection is secure to prevent leaks.
• A control valve is present to adjust the water flow for the sprayer.

Image: The play center with the built-in volcano water sprayer in operation, creating a refreshing mist.

4. Accessory Placement

• Place the 3 inflatable dinosaurs and 2 inflatable cacti within the play area as desired.
• Position the freestanding volcano ball toss game and place the 6 FunBallz nearby for play.

Image: A close-up view of the three distinct inflatable dinosaur figures: a brown T-Rex, a light blue Brontosaurus, and a blue Stegosaurus.

Image: The inflatable volcano ball pit with an orange rim and two green inflatable cacti, ready for interactive play.

Image: An orange FunBallz in motion, being tossed towards the inflatable volcano ball pit, demonstrating the interactive game feature.

Operating Instructions

1. Filling the Play Center

• Once the play center is fully inflated and the garden hose is connected, slowly turn on the water supply.
• Allow the play center to fill with water to the desired level, ensuring it does not exceed the recommended maximum fill line (if indicated) or a safe depth for children. The capacity is 108 gallons.

2. Using the Water Sprayer

• The built-in volcano sprayer will activate once the water supply is turned on.
• Adjust the water flow using the control valve near the hose connection to increase or decrease the spray intensity.

3. Interactive Play

• Children can enjoy splashing in the water, interacting with the inflatable dinosaurs and cacti.
• Utilize the volcano ball toss game by throwing the FunBallz into the ring.

Maintenance

1. Cleaning

• Regularly clean the play center with mild soap and water. Do not use abrasive cleaners or harsh chemicals.
• Rinse thoroughly with clean water and allow to air dry completely before storage.

2. Draining

• The play center is designed with a convenient drain plug for easy water removal.
• Open the drain plug to empty the water after each use.

3. Storage

• Once completely dry, deflate all sections of the play center and its accessories.
• Fold neatly and store in a cool, dry place away from direct sunlight and extreme temperatures.
• Keep away from pests and sharp objects during storage.

Troubleshooting

1. Leaks

• Issue: Air or water leakage.
• Solution: Check all inflation valves to ensure they are securely closed. Inspect the surface of the play center and accessories for small punctures. Patch kits (often sold separately) can be used for minor repairs.

2. Sprayer Not Working

• Issue: No water or weak spray from the volcano.
• Solution: Ensure the garden hose is properly connected and the water supply is fully turned on. Check the control valve near the hose connection to ensure it is open. Inspect the sprayer nozzles for any blockages.

3. Difficulty Inflating

• Issue: Sections do not inflate properly.
• Solution: Verify that the air pump is functioning correctly and the nozzle is securely inserted into the inflation valve. Ensure valves are not obstructed.

Specifications

Warranty and Support

For warranty information, product support, or to purchase replacement parts, please contact Intex customer service directly. Refer to the contact information provided on the product packaging or visit the official Intex website.

Intex Website: www.intexcorp.com