DYONDER Mini Wireless Controller for PS4/PC Instruction Manual

Introduction

Thank you for choosing the DYONDER Mini Wireless Controller. This compact gamepad is designed for enhanced gaming experiences across multiple platforms, including PlayStation 4 (PS4, PS4 Pro, PS4 Slim) and PC (Windows 10/8/7). It features dual vibration, a 6-axis sensor, and an audio function for immersive gameplay. Please read this manual carefully to ensure proper setup and operation.

Product Overview

Front view of the DYONDER Mini Wireless Controller, showcasing its compact design.

Dimensions of the controller: 145mm (5.7 inches) length, 75mm (3 inches) height, 45mm (1.5 inches) width.

Back view of the controller, showing the model information and regulatory marks.

Detailed layout of the controller buttons, including Multi-touch Pad, Share Button, Options Button, D-Pad, Left Stick, Right Stick, Home Button, R1/R2, L1/L2, and Charging Port.

Key Features:

• Dual Vibration: Experience immersive feedback with dual vibration motors.
• 6-Axis Motion Sensor: Enhance dynamic feeling and control in compatible games.
• Built-in 600mAh Battery: Provides 10-12 hours of playing time on a 2-hour charge.
• Multi-platform Support: Compatible with PS4/Pro/Slim, PC (Windows 10/8/7), iOS, and Android.
• Mini Design: Compact and easy to handle, especially suitable for smaller hands.
• Audio Function: Includes a 3.5mm headphone jack for audio output.

Setup and Connection

Connecting to PlayStation 4 (PS4/Pro/Slim):

1. Ensure your PS4 console is powered on.
2. Connect the controller to the PS4 console using the provided USB cable.
3. Press the Home button on the controller. The light bar will flash, indicating it's pairing.
4. Once the light bar turns solid, the controller is successfully connected and ready for use.
5. After initial pairing, you can disconnect the USB cable and use the controller wirelessly.

Connecting to PC (Windows 10/8/7):

1. Wired Connection: Connect the controller to your PC using a USB cable. The PC should automatically detect and install the necessary drivers.
2. Bluetooth Connection:
   • Ensure your PC has Bluetooth enabled.
   • On the controller, press and hold the Share button and the Home button simultaneously until the light bar starts flashing rapidly.
   • On your PC, go to Bluetooth settings and search for new devices.
   • Select the controller from the list of available devices to pair.

Connecting to iOS/Android Devices:

1. Ensure Bluetooth is enabled on your mobile device.
2. On the controller, press and hold the Share button and the Home button simultaneously until the light bar starts flashing rapidly.
3. On your mobile device, go to Bluetooth settings and search for new devices.
4. Select the controller from the list of available devices to pair.

Operating Instructions

Power On/Off:

• Power On: Press the Home button once.
• Power Off: Press and hold the Home button for approximately 10 seconds until the light bar turns off. The controller will also automatically power off after a period of inactivity.

Charging the Controller:

The controller features a built-in 600mAh battery, providing 10-12 hours of playtime after a 2-hour charge.

• Connect the provided USB cable to the charging port on the controller and the other end to a USB power source (e.g., PS4 console, PC, or USB wall adapter).
• The light bar will slowly flash while charging and turn off when fully charged.
• A full charge typically takes about 2 hours and provides 10-12 hours of gameplay.

Using the Audio Function:

• Plug a 3.5mm compatible headset into the audio jack located on the bottom of the controller.
• Audio output will be routed through the headset.

Maintenance

• Keep the controller clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
• Store the controller in a cool, dry place away from direct sunlight and extreme temperatures.
• Avoid dropping the controller or subjecting it to strong impacts.
• Do not attempt to disassemble or modify the controller, as this will void the warranty.

Troubleshooting

Controller Not Connecting:

• Ensure the controller is fully charged.
• For PS4, try connecting via USB cable first to establish the initial pairing.
• Reset the controller: Locate the small reset button on the back of the controller (often inside a small hole). Use a thin object (like a paperclip) to press and hold the button for 3-5 seconds. Then, attempt to re-pair.
• Ensure no other Bluetooth devices are interfering with the connection.

Input Lag or Unresponsive Buttons/Sticks:

• Ensure the controller is within range of the console/device.
• Check for any physical obstructions between the controller and the console/device.
• If using a wired connection, try a different USB port or cable.
• Reset the controller as described above.

Battery Not Holding Charge:

• Ensure you are using a reliable USB cable and power source.
• If the issue persists, contact customer support.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact DYONDER customer service directly. Keep your purchase receipt for any warranty claims.