1. Introduction
The TAKSTAR DA10S is a versatile 2-in-1 device that integrates a microphone, power amplifier, and speaker into a single portable unit. Designed for various applications such as karaoke, meetings, outdoor events, teaching, and public speaking, it offers clear voice amplification and multiple sound effects. This manual provides detailed instructions for the proper use, maintenance, and troubleshooting of your DA10S device.
Important Note:
- The DA10S is not a Bluetooth transmitter microphone and cannot record sound from cell phones, computers, or laptops.
- It has a built-in speaker and can't connect to external Bluetooth speakers or other audio receivers like PA systems or karaoke systems.
Image: Overview of the TAKSTAR DA10S highlighting its features as a speech mic and wireless Bluetooth microphone.
2. Safety Information
- Do not expose the device to extreme temperatures, humidity, or direct sunlight.
- Avoid dropping or subjecting the device to strong impacts.
- Keep the microphone away from speakers/mobile phones to prevent howling.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Use only the provided Type-C cable for charging.
- Dispose of batteries according to local regulations.
3. Package Contents
Please check the package contents upon unboxing to ensure all items are present:
- 1 x TAKSTAR DA10S Speech Microphone
- 1 x Type-C Charging Cable
- 1 x Windscreen
- 1 x User Manual (this document)
4. Product Overview
Familiarize yourself with the components and controls of your DA10S microphone.
Image: Front view of the TAKSTAR DA10S microphone, showing the grille, control buttons, and speaker base.
Controls and Indicators:
- Microphone Grille: Captures sound.
- Volume Up (+) Button: Increases the loudspeaker volume.
- Mode (M) Button: Switches between sound effects/modes. Press and hold for 2 seconds to auto-switch to Speech mode.
- Volume Down (-) Button: Decreases the loudspeaker volume.
- Power Button: Turns the device on/off.
- Charging Port: USB Type-C port for charging.
- Speaker: Integrated speaker for voice amplification.
5. Setup
5.1 Charging the Device
Before first use, fully charge the DA10S microphone. The device uses a Lithium Ion battery.
- Connect the provided Type-C cable to the charging port on the microphone.
- Connect the other end of the cable to a standard USB power adapter (not included) or a computer's USB port.
- The charging indicator light will show the charging status (refer to device for specific light behavior).
- Once fully charged, disconnect the cable. A full charge provides up to 8 hours of playtime.
5.2 Powering On/Off
- To power on, press and hold the Power button until the device activates.
- To power off, press and hold the Power button until the device shuts down.
- The device features an ultra-long standby and will turn off automatically after 15 minutes of no input to conserve power.
6. Operating Instructions
6.1 Basic Usage
- Power on the DA10S microphone.
- Hold the microphone approximately 2-5 inches from your mouth for optimal sound pickup.
- Adjust the loudspeaker volume using the '+' and '-' buttons. The DA10S has 5-speed volume control.
- Ensure the microphone is not pointed directly at the speaker to prevent feedback (howling).
Image: Examples of incorrect ways to hold the microphone, such as covering the grille or speaker, which can affect performance.
6.2 Bluetooth Connectivity
The DA10S can connect to mobile phones, computers, and tablets via Bluetooth for audio playback in Karaoke/Bluetooth Mode.
- Ensure the DA10S is powered on and in a discoverable Bluetooth mode (usually indicated by a flashing light).
- On your device (smartphone, tablet, PC), go to Bluetooth settings and search for available devices.
- Select "TAKSTAR DA10S" from the list to pair.
- Once paired, you can play audio from your device through the DA10S speaker while using the microphone for amplification.
Image: Visual representation of the DA10S's compatibility with Android, iOS, PC, and general Bluetooth devices for wireless playback.
6.3 Sound Effects and Modes
The DA10S features 7 distinct sound effects/modes. Press the 'M' button to cycle through them.
Image: Diagram illustrating the seven sound effects: Karaoke, Speech, Bluetooth, Monster, Anime, Host, and Child mode.
- Karaoke Mode: Ideal for singing along to music.
- Speech Mode: Optimized for clear voice amplification during presentations or lectures. Hold the 'M' button for 2 seconds to auto-switch to this mode.
- Bluetooth Mode: For general Bluetooth audio playback and microphone use.
- Monster Mode: Applies a deep, distorted voice effect.
- Anime Mode: Applies a high-pitched, cartoon-like voice effect.
- Host Mode: Provides a clear, resonant voice effect suitable for hosting events.
- Child Mode: Applies a higher-pitched voice effect, often used for entertainment.
The built-in smart digital DSP chip includes a howl rejecting function to effectively prevent harsh feedback, ensuring a professional audio experience.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the microphone. Do not use abrasive cleaners or immerse the device in water.
- Storage: Store the microphone in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for a long period, charge the battery to about 50% every few months.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from microphone. | Device is off; low battery; volume too low; microphone grille blocked. | Ensure device is powered on. Charge the battery. Increase volume using '+' button. Ensure microphone grille is clear and not covered. |
| Howling/Feedback noise. | Microphone too close to speaker; volume too high; microphone pointed at speaker. | Increase distance between microphone and speaker. Lower the volume. Adjust microphone position to avoid pointing directly at the speaker. |
| Cannot connect via Bluetooth. | Device not in pairing mode; Bluetooth disabled on source device; already connected to another device. | Ensure DA10S is in Bluetooth mode. Enable Bluetooth on your phone/PC/tablet. Disconnect from other devices if necessary. Restart both devices. |
| Short battery life. | Battery not fully charged; aging battery; continuous high volume usage. | Ensure full charge before use. Reduce volume if not needed. Battery life naturally degrades over time. |
| Cannot record sound to phone/computer. | The DA10S is not designed for this function. | The DA10S is a voice amplifier and speaker, not a Bluetooth transmitter microphone for recording. |
9. Specifications
| Feature | Detail |
|---|---|
| Brand | TAKSTAR |
| Model Name | DA10S |
| Microphone Form Factor | Handheld |
| Connectivity Technology | Bluetooth 5.0 |
| Power Source | Battery Powered (1 Lithium Ion battery required) |
| Output Power | 10W |
| Coverage Area | Approx. 70㎡ (1600 sq. ft) |
| Playtime | Up to 8 hours |
| Sound Effects | 7 Kinds (Karaoke, Speech, Bluetooth, Monster, Anime, Host, Child) |
| Special Features | Volume Control, DSP Anti-howling Chip, Auto-off (15 mins no input) |
| Audio Sensitivity | 66 dB |
| Signal-to-Noise Ratio | 66 dB |
| Frequency Response | 15 KHz |
| Polar Pattern | Unidirectional |
| Item Weight | 1.1 pounds |
| Package Dimensions | 11.26 x 3.98 x 3.31 inches |
| Compatible Devices | Laptop, Personal Computer, Smartphone, Tablet |
10. Warranty and Support
For warranty information and customer support, please refer to the official TAKSTAR website or contact the seller directly. If you have any questions or encounter issues with your DA10S microphone, please feel free to contact us, and we will reply within 24 hours.
You can visit the official TAKSTAR store on Amazon for more information: TAKSTAR Store
