HYPER GOGO Cruiser 12 Electric Kids Motorbike Instruction Manual

1. Introduction

Welcome to the HYPER GOGO Cruiser 12 Electric Kids Motorbike instruction manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric motorbike. Please read this manual thoroughly before use to ensure optimal performance and safety for the rider.

Image: Side view of the HYPER GOGO Cruiser 12 Electric Kids Motorbike.

2. What's in the Box

Before beginning assembly, ensure all components are present. The package should contain the following items:

• Semi-assembled Minibike x1
• Charger x1
• Storage Box Lid x1
• Wheel x1
• Wheel Hardware
• Kickstand x1
• Kickstand Hardware
• Handlebar Clamp x4
• Handlebar Hardware
• Axle with Nuts x1
• Bolt x2
• Medium Bolt x4
• Pedal x2

Image: Detailed diagram of all parts included in the HYPER GOGO Cruiser 12 package.

3. Setup and Assembly

Follow these steps to assemble your HYPER GOGO Cruiser 12:

1. Attach the Kickstand: Secure the kickstand to the frame using the provided bolts. Ensure it is firmly attached for stability.
2. Install the Front Wheel: Align the front wheel with the fork, ensuring the arrow on the tire indicates the correct direction of rotation. Insert the axle and secure it with the nuts and locking washers.
3. Mount the Fenders: Remove the four bolts from the front fork and rear frame. Position the fenders and reattach them using the bolts.
4. Install the Handlebar: Place the handlebar onto the stem. Use the handlebar clamps and bolts to secure it. Ensure all cables are routed correctly and not pinched.
5. Connect Electrical Wires: Locate the green and red electrical connectors near the handlebar stem. Align the arrows on the connectors and push them firmly together until they click.
6. Secure the Headlight: Adjust the headlight to the desired angle and tighten its screw with a Phillips screwdriver.
7. Attach the Tank Cover: The tank cover is magnetic and simply attaches to the top of the frame. This cover also functions as a storage compartment.
8. Install Foot Pegs: Screw the foot pegs into the designated slots on both sides of the frame by hand until secure.

Video: Assembly guide for the HYPER GOGO Cruiser 12, demonstrating step-by-step installation of components.

4. Operating Instructions

Familiarize yourself with the controls and features for a safe riding experience:

• Power On/Off: Press and hold the power button on the handlebar for approximately 5 seconds to turn the motorbike on or off.
• Speed Control: The motorbike features 3 adjustable speed levels with a maximum speed of up to 10 MPH. Use the controls on the handlebar to select the desired speed. A speed alarm will sound if the rider exceeds 10 MPH.
• Braking: The rear hub brake is activated via the lever on the handlebar. Squeeze the lever to engage the brake and slow down or stop.
• Throttle: Twist the right handlebar grip to engage the throttle and accelerate.
• Steam Function: To activate the simulated smoke effect, fill the water filling port on the exhaust pipe with filtered water. Press the steamer button located on the side of the engine casing.
• LED Lights: The motorbike is equipped with LED lights for enhanced visibility. These lights can be controlled via the handlebar display.
• App Control: The HYPER GOGO Cruiser 12 can be controlled via a dedicated app, allowing adjustments to speed, soundscapes, and dazzling lights.

Video: Demonstration of the HYPER GOGO Cruiser 12's features, including lights, sound, and app connectivity.

5. Maintenance

Regular maintenance ensures the longevity and safe operation of your motorbike:

• Cleaning: Wipe down the motorbike with a damp cloth after each use. Avoid using harsh chemicals or abrasive cleaners.
• Battery Care: Charge the 24V 5.2A Li-ion battery fully after each ride and before long-term storage. Do not overcharge.
• Tire Pressure: Periodically check the tire pressure of the 12x3" tires to ensure they are adequately inflated for optimal performance and safety.
• General Inspection: Regularly inspect all bolts, nuts, and connections to ensure they are tight and secure. Check brake functionality before each ride.

Image: Close-up of the battery indicator on the handlebar.

6. Troubleshooting

If you encounter issues, refer to these common troubleshooting tips:

• Motorbike Not Starting: Ensure the battery is fully charged and all electrical connections are securely fastened. Check the power button on the handlebar.
• Reduced Performance: Low battery charge or incorrect speed setting can affect performance. Ensure tires are properly inflated.
• Steam Function Not Working: Verify that the water filling port has sufficient filtered water.
• Unusual Noises: Stop riding immediately and inspect the motorbike for any loose parts or obstructions.

7. Specifications

Image: Dimensions and recommended rider height for the HYPER GOGO Cruiser 12.

8. Safety Guidelines

Always prioritize safety when operating the HYPER GOGO Cruiser 12:

• Protective Gear: Always wear a helmet and appropriate safety gear (e.g., knee pads, elbow pads) while riding.
• Supervision: Adult supervision is recommended, especially for younger riders.
• Riding Area: Ride in closed-off areas, away from traffic and pedestrians. Avoid riding on public roads.
• Weight Limit: Do not exceed the maximum load capacity of 145 lbs.
• Weather Conditions: While the motorbike has an IP4 water resistance rating, avoid riding in heavy rain or through deep puddles to prevent damage.
• Pre-Ride Check: Before each ride, check the brakes, tire pressure, and ensure all parts are secure.

Video: A short preview video from the seller showing the HYPER GOGO Cruiser 12 in action, highlighting its design.

9. Warranty and Support

Your HYPER GOGO electric motorcycle includes a 90-day warranty on parts and the electric engine. For any technical assistance or product issues, please contact customer support via email. Your satisfaction is our priority.