THERMOS ICON SERIES Water Bottle with Spout - 18 Ounce

Introduction

The THERMOS ICON SERIES 18oz Stainless Steel Water Bottle is designed to keep your beverages cold for extended periods, ensuring hydration throughout your day. Featuring superior vacuum insulation, durable finishes, and a high-flow spout, this bottle combines meticulous design with thoughtful engineering for everyday convenience.

Image: Front view of the Navy THERMOS ICON SERIES Water Bottle, showcasing its sleek design and the THERMOS logo.

This product is not intended for use with hot liquids.

Key Features

• Superior Vacuum Insulation: Keeps drinks cold for up to 16 hours.
• RAPIDRATE High Flow Spout: Designed for optimal liquid flow.
• DURASHIELD Hygienic Covered Spout: Includes a locking ring for secure lid closure.
• Durable 18/8 Stainless Steel Construction: Built to withstand daily use, drops, and dings.
• GRIPTEC Base: Non-slip, quiet, soft-touch base for added stability.
• BPA-Free Materials: Ensures safe drinking.
• Integrated Carry Handle: For easy portability.

Image: An infographic highlighting key features such as the hygienic covered spout, locking leak-proof lid, integrated carry handle, vacuum insulation, and dishwasher-safe properties.

Image: A person drinking from the water bottle, illustrating the RAPIDRATE high flow spout design.

Image: A close-up view of the bottle's base, showing the GRIPTEC non-slip feature and indicating 18/8 high-quality stainless steel and BPA-free construction.

Setup

Before first use, and after each use, follow these steps to ensure proper hygiene and performance:

1. Wash All Parts: Disassemble the lid and wash all components thoroughly with warm, soapy water. The bottle and lid are top-rack dishwasher safe, but hand washing is recommended for best results and longevity.
2. Rinse Thoroughly: Rinse all parts completely to remove any soap residue.
3. Dry Completely: Allow all parts to air dry completely before reassembling or storing.

Operating Instructions

Filling the Bottle

• Unscrew the lid from the bottle.
• Fill the bottle with your desired cold beverage. Do not overfill; leave space for the lid.
• Securely screw the lid back onto the bottle until it is hand-tight.

Using the Spout

• Unlock the Spout: Slide the locking ring (located near the spout button) downwards to unlock the spout.
• Open the Spout: Press the button on the lid to release the spout cover. The cover will spring open, revealing the RAPIDRATE high flow spout.
• Drink: Tilt the bottle and drink directly from the spout.
• Close and Lock: After drinking, push the spout cover down firmly until it clicks into place. Slide the locking ring upwards to secure the spout and prevent accidental opening or leaks.

Important: Always ensure the lid is securely closed and the locking ring is engaged when transporting the bottle to prevent leaks.

Care and Maintenance

Proper care will extend the life and performance of your THERMOS ICON SERIES Water Bottle.

• Cleaning: The bottle and lid are top-rack dishwasher safe. For thorough cleaning, especially of the lid and spout mechanism, hand washing is recommended.
• Disassembly for Cleaning: The rubber seal within the lid can be carefully popped out for more thorough cleaning to prevent mold or residue buildup. Ensure it is properly reinserted before use to maintain the leak-proof seal.
• Drying: Always allow all parts to dry completely before reassembling and storing to prevent odors and bacterial growth.
• Storage: Store the bottle with the lid slightly ajar to allow air circulation.

Do Not: Use abrasive cleaners, scrubbers, or bleach. Do not microwave or place in a freezer. Do not use for hot liquids.

Troubleshooting

• Liquid Not Staying Cold:
  • Ensure the lid is securely screwed on and the spout cover is fully closed and locked.
  • Verify that the rubber seal inside the lid is correctly seated and free from damage or debris.
  • Confirm that only cold liquids are being used, as the bottle is not designed for hot liquids.
• Leaking:
  • Check that the lid is tightly screwed onto the bottle.
  • Ensure the spout cover is pressed down firmly until it clicks and the locking ring is engaged.
  • Inspect the rubber seal for any tears, cracks, or misalignment. Replace if necessary.
• Difficulty Opening/Closing Spout:
  • Ensure the locking ring is fully disengaged before attempting to open the spout.
  • Clean the spout mechanism thoroughly to remove any sticky residue that might be impeding movement.
• Unpleasant Odor:
  • Thoroughly clean all parts, especially the lid and removable rubber seal, with warm soapy water.
  • Allow all components to air dry completely before reassembly.

Product Specifications

Warranty Information

THERMOS products are known for their quality and durability, backed by over a century of heritage. For specific warranty details and terms, please refer to the official THERMOS website or the documentation included with your product. THERMOS stands by its commitment to providing reliable products that enhance everyday life.

Customer Support

Should you have any questions, require assistance, or need to report an issue with your THERMOS ICON SERIES Water Bottle, please contact THERMOS customer service directly. You can find contact information and additional resources on the official THERMOS website: Visit the THERMOS Store on Amazon.