Introduction
Thank you for choosing the Briever Dimmable Candle Warmer Lamp. This product is designed to melt scented candles using a top-down heating method, releasing fragrance without an open flame, smoke, or soot. It features adjustable brightness, a timer function, and height adjustment to accommodate various candle sizes. Please read this manual thoroughly before use to ensure safe and optimal operation.
Safety Information
- Always place the candle warmer on a stable, flat, and heat-resistant surface.
- Do not operate the lamp near flammable materials.
- Keep out of reach of children and pets.
- Ensure the power cord is not damaged and is properly plugged into a suitable electrical outlet (120V AC).
- Do not touch the bulb or the area directly beneath it when the lamp is in operation or immediately after turning it off, as it will be hot.
- Unplug the lamp from the power outlet when not in use or before cleaning.
- This product is for indoor use only and is not water-resistant. Avoid contact with water or moisture.
Package Contents
- Briever Dimmable Candle Warmer Lamp (Walnut Solid Wood Base, Black Metal Body, Glass Shade)
- GU10 Halogen Bulb (50W) - 2 included (one pre-installed, one spare)
- Instruction Manual
Setup
- Unpack: Carefully remove all components from the packaging.
- Place on Surface: Position the candle warmer lamp on a stable, flat, and heat-resistant surface. The walnut solid wood base features non-slip pads for stability.
- Insert Candle: Place your desired scented candle (up to 5.9 inches in height and 4 inches in diameter) onto the center of the wooden base.
- Adjust Height: Loosen the knob on the vertical metal rod to adjust the height of the lamp head. Position the lamp head approximately 1-2 inches above the candle for optimal melting. Tighten the knob to secure the height.
- Connect Power: Plug the power cord into a standard 120V AC electrical outlet.
Image: Briever Dimmable Candle Warmer Lamp with a candle on a wooden base, showcasing its elegant design.
Image: Diagram illustrating the adjustable height feature of the candle warmer lamp, accommodating candles between 2.95 to 5.9 inches in height.
Operating Instructions
- Power On/Off: Press the power button (⏻) on the inline remote control to turn the lamp on or off.
- Adjust Brightness (Dimmer): Use the '+' and '-' buttons on the remote to adjust the brightness of the halogen bulb. There are four brightness levels (25%, 50%, 75%, 100%). Higher brightness levels will generate more heat, melting the candle wax faster and intensifying fragrance release.
- Set Timer: Press the timer button (◷) to cycle through the available timer settings: 2 hours, 4 hours, or 8 hours. The lamp will automatically turn off after the selected duration. This feature ensures safe operation, especially when leaving the room or going to sleep.
Image: The inline remote control with clearly marked buttons for power, brightness adjustment (+/-), and timer settings (2H, 4H, 8H).
Image: Visual representation of the four brightness adjustment levels (25%, 50%, 75%, 100%) of the candle warmer lamp.
Official Product Video: Dimmable Candle Warmer Lamp with Timer
Video: This video demonstrates the dimmable and timer functions of the Briever Candle Warmer Lamp, highlighting its ease of use and safety features.
Maintenance
- Cleaning: Ensure the lamp is unplugged and completely cool before cleaning. Wipe the lamp and base with a soft, dry cloth. Do not use abrasive cleaners or immerse any part of the lamp in water.
- Bulb Replacement: The lamp uses a GU10 50W halogen bulb. To replace, ensure the lamp is unplugged and cool. Gently push the bulb upwards and twist counter-clockwise to remove. Insert the new bulb by aligning the pins, pushing upwards, and twisting clockwise until secure.
Image: Detailed view of the lamp's components, including the non-slip base, height-adjustable tube, and the remote control, useful for understanding assembly and maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Power cord not properly plugged in. Bulb is loose or burnt out. | Ensure the power cord is securely plugged into a working outlet. Check if the bulb is securely installed. Replace the bulb if it is burnt out. |
| Candle wax not melting or scent is weak. | Lamp head is too high. Brightness setting is too low. Candle is old or has low fragrance. | Lower the lamp head closer to the candle (approx. 1-2 inches). Increase the brightness setting using the '+' button. Consider using a fresh candle or one known for strong fragrance throw. |
| Timer function not working. | Timer not set correctly. | Press the timer button (◷) to select the desired duration (2H, 4H, or 8H). Ensure the corresponding indicator light is on. |
Specifications
- Model Name: L6088-HU
- Brand: Briever
- Product Dimensions: 5.11"D x 5.11"W x 12.79"H
- Base Material: Wood (Walnut Solid Wood)
- Shade Material: Glass, Metal, Wood
- Color: Black (metal body), Walnut (wood base)
- Light Source Type: Halogen
- Bulb Base: GU10
- Wattage: 50 watts
- Voltage: 120 Volts (AC)
- Control Method: Push Button (Inline Remote)
- Timer Settings: 2H, 4H, 8H
- Brightness Levels: 4 (Dimmable)
- Installation Type: Freestanding
- Indoor/Outdoor Usage: Indoor
- Water Resistance Level: Not Water Resistant
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact Briever customer service directly. Keep your purchase receipt for any warranty claims.