AGM MASTECH Shell Ejection Toy Rifle Instruction Manual

1. Important Safety Information

Please read all safety warnings and instructions carefully before using the AGM MASTECH Shell Ejection Toy Rifle. Failure to follow these instructions may result in injury.

• Recommended Age: This toy is recommended for ages 8 and up. Adult supervision is advised.
• Eye Protection: Always wear safety glasses (included) when operating this toy blaster to prevent eye injuries.
• Do Not Aim at Eyes or Face: Never aim the blaster at people's eyes or face.
• Use Only Official Darts and Shells: Use only the soft foam darts and shells provided or approved by AGM MASTECH. Do not modify darts or the blaster.
• Choking Hazard: Small parts may be generated. Not for children under 3 years.
• Keep Away from Pets: Small parts and darts can be a choking hazard for pets.

2. Product Overview

The AGM MASTECH Shell Ejection Toy Rifle offers a realistic and engaging play experience with its lever-action mechanism and automatic shell ejection. It fires soft foam darts, providing safe fun for target practice and imaginative play.

Key Features:

• Realistic Shell Ejection: Experience authentic action as shells eject automatically upon reloading.
• Lever Action: Manual pump-action for loading and firing.
• Soft Foam Darts: Includes 140 official soft foam darts for safe play.
• Long Range: Darts can fire up to 66 feet (20 meters).
• Adjustable Stock: Customize the blaster's length for comfort and aiming.
• Safety Mechanisms: Built-in safety features to prevent accidental firing.

Figure 1: The AGM MASTECH Shell Ejection Toy Rifle with included soft darts and shells.

3. Package Contents

• 1 x AGM MASTECH Shell Ejection Toy Rifle
• 20 x Recyclable Shells
• 140 x Official Soft Foam Darts (including suction cup darts)
• 1 x Screwdriver (for assembly)
• 1 x Safety Glasses
• 1 x Target (may vary by package)
• 1 x Ammunition Hanger (for side-mounting shells)

4. Setup and Assembly

4.1 Attaching the Stock

The blaster's stock can be adjusted for length. To extend or retract the stock, locate the small pin/button on the underside of the stock near the grip. Pull this pin/button outwards and slide the stock to your desired length. Release the pin/button to lock it in place.

Figure 2: Adjusting the stock length for comfortable use.

4.2 Attaching Ammunition Hanger

The ammunition hanger can be attached to the side of the blaster to hold additional shells. Align the clips on the hanger with the corresponding slots on the blaster and press firmly until it clicks into place.

Figure 3: The ammunition hanger attached to the side of the blaster.

4.3 Preparing Darts and Shells

To prepare for firing, insert one soft foam dart into each shell. Ensure the dart is fully seated within the shell.

Figure 4: Inserting soft foam darts into the plastic shells.

5. Operating Instructions

5.1 Loading the Blaster

Open the loading door on the side of the blaster. Insert the prepared shells (with darts) into the loading chamber. The blaster can hold multiple shells in its internal magazine. You can also store additional shells in the side-mounted ammunition hanger.

5.2 Priming and Firing

1. Unlock Safety: Ensure the safety switch is disengaged. Some models may have a trigger safety that locks the trigger when the loading door is open.
2. Pump Action: Pull the pump grip (fore-end) fully backward and then push it fully forward. This action will load a shell into the firing chamber and eject any spent shell.
3. Fire: Aim at your target and pull the trigger to fire the foam dart.

The blaster features a realistic shell-throwing experience, where empty shells are ejected as you pump to reload, adding to the immersive play.

Figure 5: The blaster is capable of firing darts up to 66 feet (20 meters).

6. Dart Types

The blaster comes with various types of soft foam darts for different play scenarios:

• Suction Cup Darts: These darts have a suction cup tip, ideal for sticking to smooth surfaces and target practice.
• Standard Foam Darts: Regular soft foam darts for general play.

Figure 6: Close-up of suction cup darts, designed for sticking to targets.

7. Maintenance

• Cleaning: Wipe the blaster with a dry cloth to remove dust and debris. Do not use water or harsh chemicals.
• Dart Care: Keep darts clean and dry. Avoid bending or damaging darts, as this can affect performance.
• Storage: Store the blaster and accessories in a cool, dry place away from direct sunlight.

8. Troubleshooting

• Dart Not Firing:
  • Ensure a dart is properly loaded into a shell and the shell is correctly inserted into the firing chamber.
  • Verify the blaster is fully primed by pulling the pump grip completely back and forward.
  • Check that all safety mechanisms are disengaged.
• Shell Not Ejecting:
  • Ensure the pump grip is pulled fully backward with sufficient force.
  • Check for any obstructions in the ejection port.

9. Specifications

10. Warranty and Support

For warranty information or product support, please contact AGM MASTECH customer service through the retailer where the product was purchased. Keep your purchase receipt as proof of purchase.