Introduction
This manual provides comprehensive instructions for the setup, operation, and maintenance of your new replacement remote control for Breeze33 Hyper Pro Mini Split Systems. This remote is designed to be compatible with various Breeze33 models, including BZ33-HP18WALL1-C, BZ33-HP12WALL1-C, BZ33-HP09WALL1-C, and BZ33-HP30WALL2-C. Please read this manual thoroughly to ensure proper use and to maximize the lifespan of your remote control.
Image: The remote control in a typical usage scenario, operating a mini split AC unit.
Package Contents
Upon opening your package, please verify that all the following items are included:
- 1x Replacement Remote Control
- 1x Wall Mounting Bracket
Note: AAA 1.5V batteries (x2) are not included and must be purchased separately.
Image: The replacement remote control and its accompanying wall mounting bracket.
Setup
1. Battery Installation
To power your remote control, you will need two AAA 1.5V batteries (not included).
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards to open the compartment.
- Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Slide the cover back into place until it clicks securely.
Image: Front view of the remote control. The battery compartment is on the reverse side.
2. Wall Mounting Bracket Installation
The included wall mounting bracket allows for convenient storage of your remote control.
- Choose a suitable location on a wall, preferably near your mini split unit, that is easily accessible.
- Use screws (not included) to secure the bracket to the wall. Ensure it is level and firmly attached.
- Once installed, the remote control can be securely placed into the bracket for storage.
Image: The remote control securely placed within its wall mounting bracket.
Operating Instructions
This section details the functions of each button on your remote control and how to use them effectively.
Remote Control Buttons
Image: A clear view of the remote control's layout, indicating the position of each button.
| Button | Function |
|---|---|
| ON/OFF | Powers the mini split unit on or off. |
| MODE | Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto). |
| FAN | Adjusts the fan speed (e.g., Low, Medium, High, Auto). |
| TEMP ▲ / ▼ | Increases or decreases the set temperature. |
| SLEEP | Activates or deactivates the sleep mode for energy saving and quiet operation. |
| TURBO | Engages maximum cooling or heating power for rapid temperature change. |
| LED | Turns the display light on or off on the indoor unit. |
| SHORT CUT | Recalls a previously saved favorite setting. |
| TIMER ON | Sets a timer for the unit to turn on. |
| TIMER OFF | Sets a timer for the unit to turn off. |
| SWING / DIRECT ◀ / ▶ | Controls the horizontal louver swing or adjusts its direction. |
Temperature Unit Selection (Fahrenheit/Celsius)
This remote control supports both Fahrenheit (°F) and Celsius (°C) temperature displays. To switch between units, press and hold the TEMP ▲ and TEMP ▼ buttons simultaneously for approximately 3 seconds until the display changes.
Image: The remote control display showing temperature in Fahrenheit on the left and Celsius on the right.
Green Backlight Feature
The remote control features a green backlight for improved visibility in low-light conditions. The backlight automatically activates when any button is pressed and remains on for a few seconds before fading out.
Image: A close-up view of the remote control's display with the green backlight illuminated.
Compatibility
This replacement remote control is specifically designed to be compatible with Breeze33 Hyper Pro Mini Split System models that originally used an R57 series remote. This includes, but is not limited to, the following models:
- BZ33-HP18WALL1-C
- BZ33-HP12WALL1-C
- BZ33-HP09WALL1-C
- BZ33-HP30WALL2-C
It is also compatible with various R57 series remotes such as R57B/BGE, R57B1/BGE, R57B2/BGE, RG57D/BGE, RG57A6/BGEFU1, RG57A2/BGEF, RG57K7(B)/BGEF, RG57B(B)/BGE, RG57A1(B)/BGE, RG57D1(C)/BGEF, RG57A3/BGEF, R57E1/BGEU1, RG57A7/BGEF, RG57A6/BGEF, RG57A2/BGEF, RG57A3/BGEF, RG57B/BGE.
Image: Visual representation of the remote's features and a list of compatible R57 series models.
Maintenance
Battery Replacement
When the remote control's display becomes dim or the unit does not respond to commands, it is likely time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.
- Always replace both batteries at the same time.
- Use new AAA 1.5V alkaline batteries for optimal performance.
- Dispose of old batteries responsibly according to local regulations.
Cleaning and Storage
To ensure the longevity of your remote control:
- Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Avoid exposing the remote to direct sunlight, high temperatures, or high humidity.
- If the remote will not be used for an extended period, remove the batteries to prevent leakage.
Troubleshooting
If you encounter issues with your remote control, please refer to the following common problems and solutions:
| Problem | Possible Cause / Solution |
|---|---|
| Remote control not responding. |
|
| Display is dim or blank. |
|
| Temperature unit is incorrect (°F vs °C). |
|
| Unit does not respond to specific functions (e.g., Swing, Turbo). |
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | BZ33-HP18WALL1-C (and compatible models: BZ33-HP12WALL1-C, BZ33-HP09WALL1-C, BZ33-HP30WALL2-C) |
| Brand | GENGQIANSI |
| Compatible Devices | Breeze33 Hyper Pro Mini Split System (R57 series compatible) |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Special Feature | Ergonomic design, Green Backlight, Fahrenheit/Celsius display |
| Power Source | 2 x AAA 1.5V Batteries (not included) |
Support
For further assistance or inquiries regarding your replacement remote control, please refer to the seller's contact information on the platform where the product was purchased. Ensure you have your order details and product model information ready when contacting support.
