1. Introduction
Thank you for choosing the OREiN Outdoor LED Floodlight with Motion Detector. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new floodlight. Please read this manual thoroughly before installation and keep it for future reference.
2. Safety Information
Always follow basic safety precautions when installing and operating electrical equipment. Failure to do so may result in fire, electric shock, or serious injury.
- Professional Installation Recommended: Installation should be performed by a qualified electrician in accordance with all local and national electrical codes.
- Power Disconnection: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the fixture.
- Grounding: Ensure the fixture is properly grounded to avoid potential electric shock.
- Outdoor Use Only: This product is designed for outdoor use and is IP65 rated for water resistance. Do not submerge.
- Avoid Direct Eye Exposure: Do not stare directly into the LED light source when the fixture is illuminated, as it may cause eye damage.
- Operating Temperature: Ensure the operating environment is within the specified temperature range.
3. Product Overview
3.1 Components
The OREiN Outdoor LED Floodlight consists of a main housing, two adjustable LED light heads, and an integrated motion sensor. Mounting accessories are included for installation.
Figure 3.1: OREiN Outdoor LED Floodlight
3.2 Key Features
- Bright and Energy-Efficient: 12W LED provides 1600 lumens of 5000K cool white light, equivalent to a 150W traditional bulb, offering twice the energy efficiency.
- Certified and Durable: CE, FCC, and RoHS certified. IP65 waterproof rating ensures reliable outdoor performance in various weather conditions (wind, snow). Constructed from high-quality polycarbonate and high-density ABS material for resistance to high temperatures, frost, UV radiation, and breakage.
- 450° Adjustable Illumination: Patented design with three active joints on each arm allows for flexible 450° adjustment, enabling precise light direction and coverage of hard-to-reach areas.
- Three Operational Modes: Features Security Mode, Daily Mode, and Manual Mode for versatile lighting control.
- Enhanced Motion Sensor: 180° detection angle with a range of up to 40ft.
- Dimmable Brightness: Adjustable brightness from 1% to 100%.
- Smart Control: Compatible with voice assistants like Alexa and Google, and controllable via the Aidot APP (Wi-Fi connection required).
- Long Lifespan: Rated for 50,000 hours, equivalent to 22 years of use at 7 hours per day.
4. Setup
4.1 Mounting Options
The floodlight can be mounted on a wall or soffit. Choose a location that provides optimal coverage and motion detection for your desired area.
Figure 4.1: Soffit and Wall Mounting Options
4.2 Electrical Connection
Ensure power is disconnected before wiring. Connect the floodlight to a 120V AC power source using standard electrical wiring practices. Refer to local electrical codes for proper installation.
4.3 App Setup and Wi-Fi Connection
For smart control features, download the Aidot APP on your smartphone. Connect the floodlight to your Wi-Fi network following the in-app instructions. This allows for remote control and advanced settings.
Figure 4.2: Voice and App Control Setup
Once connected, you can manage routines, schedules, night economy settings, and monitor power usage through the app.
Figure 4.3: DIY Lighting Options in App
5. Operating Instructions
5.1 Adjusting Light Heads
The two light heads can be independently adjusted up to 450° to direct illumination precisely where needed. Gently pivot the light heads at their joints to achieve the desired angle.
Figure 5.1: Adjustable Light Heads
5.2 Understanding Operating Modes
The floodlight offers three distinct operating modes, selectable via the Aidot APP or manual switch:
- Security Mode: The motion detector activates the light to 100% brightness when motion is detected. The light turns off after a set period of no motion.
- Daily Mode: Provides 30% brightness when no motion is detected, increasing to 100% brightness upon motion detection. This mode offers continuous low-level lighting with a boost when activity is present.
- Manual Mode: The light turns on at night and remains on continuously until manually switched off or until dawn.
5.3 Dimmable Brightness
The brightness can be adjusted from 1% to 100% via the Aidot APP, allowing you to customize the light intensity for different situations.
Figure 5.2: Dimmable Brightness Control
5.4 Motion Sensor Operation
The integrated motion sensor has a 180° detection angle and a range of up to 40ft. It is designed to detect human movement and activate the light according to the selected mode. Adjust the sensor's sensitivity and duration settings in the Aidot APP for optimal performance.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your OREiN LED Floodlight.
- Cleaning: Periodically clean the light heads and motion sensor lens with a soft, damp cloth to remove dirt, dust, or debris. Do not use abrasive cleaners or solvents.
- Inspection: Annually inspect the wiring and mounting hardware for any signs of wear, damage, or loosening. Ensure all connections remain secure.
- Weather Resistance: While IP65 rated, ensure the fixture is not continuously submerged or exposed to high-pressure water jets.
Figure 6.1: IP65 Waterproof and Weather Resistance
7. Troubleshooting
If you encounter issues with your floodlight, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power, loose wiring, faulty sensor, incorrect mode. | Check circuit breaker. Ensure all wiring connections are secure. Verify sensor settings and selected operating mode in the app. |
| Light stays on continuously. | Sensor sensitivity too high, continuous motion, Manual Mode selected. | Adjust sensor sensitivity in the app. Ensure no constant motion in detection area. Switch to Security or Daily Mode if desired. |
| Light flickers or dims unexpectedly. | Unstable power supply, loose connection, extreme temperature. | Check power supply stability. Inspect wiring connections. Ensure operating environment is within specified temperature range. |
| Motion sensor not detecting. | Sensor obstructed, sensitivity too low, incorrect angle. | Clear any obstructions from sensor lens. Increase sensor sensitivity in the app. Adjust sensor angle for optimal coverage. |
| Cannot connect to Wi-Fi/App. | Incorrect Wi-Fi password, weak signal, router issues. | Verify Wi-Fi password. Ensure floodlight is within Wi-Fi range. Restart router and floodlight. |
If the problem persists after attempting these solutions, please contact OREiN customer support for further assistance.
8. Specifications
| Attribute | Value |
|---|---|
| Manufacturer | OREiN |
| Model Number | b2ed65af-0dc4-4c4e-9498-f68692c60440 |
| Product Dimensions (L x W x H) | 7.08 x 6.3 x 3.94 cm; 710 grams |
| Color | Black - Manual Control |
| Style | Industrial |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Shape | Rectangular |
| Power Source | Corded Electric |
| Voltage | 120 Volts (AC) |
| Wattage | 12 Watts |
| Installation Method | Flush Mount |
| Bulb Type | LED |
| Luminosity | 1600 lm (Note: 5000 lm in spec is likely a typo, 1600 lm is consistent with description) |
| Electrical Plug Type | Wall Mount |
| Switch Style | Push Button |
| Certification | CE, FCC, RoHS |
| Special Features | Motion Detector, 450° Freely Adjustable, 2-Arm Spotlight |
| Usage | Yard, Garden, Home |
| Included Components | Mounting accessories, switch |
| Batteries Required/Included | No |
| ASIN | B0CFD14349 |
9. Warranty and Support
The OREiN Outdoor LED Floodlight comes with a 24-month warranty from the date of purchase. OREiN also provides 24/7 customer support to assist with any questions or issues you may encounter.
For warranty claims, technical assistance, or any other inquiries, please contact OREiN customer service through the retailer's platform or the official OREiN website. Please have your product model number and purchase details ready when contacting support.
