1. Introduction
Thank you for choosing the Ryobi 18V ONE+ Cordless Snow Shovel. This manual provides essential information for the safe and efficient operation, maintenance, and care of your snow shovel. Please read it thoroughly before first use and retain it for future reference.
The Ryobi 18V ONE+ system allows you to power over 200 tools with the same 18V battery, offering versatility and cost-effectiveness. This snow shovel is designed for clearing light to medium snow from small areas such as sidewalks, driveways, and patios.
Image: The Ryobi ONE+ ecosystem, showcasing various tools powered by the same 18V battery, highlighting the system's versatility.
2. Safety Information
WARNING: Always wear protective gloves and goggles to avoid contact with snow and projected debris. Maintain a safe distance from the machine during operation.
- Read all instructions carefully before operating the snow shovel.
- Ensure the work area is clear of obstacles, rocks, or other objects that could be thrown by the auger.
- Keep bystanders, children, and pets away from the operating area.
- Do not operate the snow shovel in wet conditions or rain. The battery enclosure is IPX4 rated for splash resistance, but direct exposure to heavy rain should be avoided.
- Always hold the tool firmly with both hands during operation.
- Never direct discharged material towards people or fragile objects.
- Turn off the tool and remove the battery pack before performing any adjustments, cleaning, or maintenance.
3. Product Overview
The Ryobi 18V ONE+ Cordless Snow Shovel is a lightweight and efficient tool designed for quick snow removal. It features a 25 cm working width and can clear snow up to 15 cm deep, propelling it up to 6 meters away.
Image: Front view of the Ryobi 18V ONE+ Cordless Snow Shovel, showing the auger and clearing width.
Image: Side view of the Ryobi 18V ONE+ Cordless Snow Shovel, illustrating its ergonomic design.
4. Setup
The Ryobi 18V ONE+ Snow Shovel requires minimal assembly. Ensure all components are present before beginning.
4.1 Handle Assembly
Connect the upper and lower shaft sections. Ensure the locking mechanisms engage securely. Adjust the auxiliary handle to a comfortable operating position and tighten it firmly.
4.2 Battery Installation
The snow shovel is sold without a battery or charger. Use a compatible Ryobi 18V ONE+ battery (e.g., 5Ah for up to 125m² clearing). To install, align the battery pack with the battery port in the housing and slide it in until it clicks into place. To remove, press the battery release button and pull the battery out.
Image: A person installing the 18V ONE+ battery into the snow shovel's weather-resistant compartment.
5. Operating Instructions
Before starting, ensure the battery is fully charged and securely installed. Wear appropriate winter clothing, including non-slip footwear, protective gloves, and eye protection.
5.1 Starting the Snow Shovel
- Hold the snow shovel firmly with both hands.
- Press and hold the safety lock-out button.
- Squeeze the trigger switch to start the motor. Release the safety lock-out button once the motor is running.
5.2 Clearing Snow
Push the snow shovel forward at a steady pace, allowing the auger to clear the snow. For deeper or heavier snow, you may need to make multiple passes or reduce your speed. The shovel is designed to propel snow up to 6 meters ahead, so be mindful of the discharge direction.
Image: A person effectively clearing snow from a patio area using the Ryobi Cordless Snow Shovel.
Image: Close-up view of the snow shovel's auger in action, efficiently clearing snow down to the surface.
5.3 Battery Performance
A 5Ah battery can provide up to 125m² of snow clearing on a single charge. Actual runtime may vary based on snow depth, density, and operating conditions.
Image: Chart illustrating estimated snow clearing area for different Ryobi 18V ONE+ battery capacities.
5.4 Product Demonstration Video
Watch this video for a visual demonstration of the Ryobi 18V ONE+ Cordless Snow Shovel in action:
Video: A demonstration of the Ryobi 18V ONE+ Cordless Snow Shovel clearing snow, highlighting its ease of use and effectiveness.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your snow shovel.
- Cleaning: After each use, remove any snow, ice, or debris from the auger and housing. Use a damp cloth to wipe down the exterior. Do not use harsh chemicals.
- Storage: Store the snow shovel in a dry, protected area away from direct sunlight and moisture. Remove the battery pack before storing.
- Battery Care: Store batteries in a cool, dry place. Do not store fully discharged batteries for extended periods.
7. Troubleshooting
If you encounter issues with your Ryobi 18V ONE+ Cordless Snow Shovel, refer to the following common troubleshooting tips:
- Tool not starting: Ensure the battery is fully charged and properly inserted. Check that the safety lock-out button is pressed before squeezing the trigger.
- Reduced performance: This may occur with very deep, wet, or heavy snow. Try reducing your forward speed or clearing smaller sections at a time. Check for any obstructions in the auger.
- Unusual noise or vibration: Immediately turn off the tool and remove the battery. Inspect the auger for any damage or foreign objects. If the issue persists, contact customer support.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | RYOBI |
| Model Number | RY18ST25A-0 (5133006091) |
| Power Source | Battery Powered (18V) |
| Clearing Width | 25 cm (9.8 inches) |
| Ideal Snow Depth | 15 cm (5.9 inches) |
| Maximum Ejection Distance | 6 meters (20 feet) |
| Item Weight | 7 kg (15.4 pounds) |
| Battery Enclosure Rating | IPX4 (Splash Resistant) |
9. Warranty and Support
For warranty information, spare parts availability, or technical support, please refer to the documentation included with your product or visit the official Ryobi website. Keep your proof of purchase for warranty claims.
EU Spare Part Availability Duration: 5 Years.
